Martinsyde G.100

From Infogalactic: the planetary knowledge core
(Redirected from Martinsyde Elephant)
Jump to: navigation, search
G.100/G.102 "Elephant"
300px
Role fighter/day bomber
Manufacturer Martinsyde
First flight 1915
Introduction 1916
Primary users Royal Flying Corps
Australian Flying Corps
Number built 271

The Martinsyde G.100 "Elephant" and the G.102 were British fighter bomber aircraft of the First World War built by Martinsyde.

It gained the name "Elephant" from its relatively large size and lack of manoeuvrability. The G.102 differed from the G.100 only in having a more powerful engine.

An unusually large aircraft by contemporary standards for a single-seater, the Elephant two-bay equal span staggered biplane was designed by A A Fletcher of the Martinsyde Company, a prototype powered by a 120 hp Austro-Daimler engine entering test in the autumn of 1915.

The initial production version, the G.100, was powered by a 120h p six-cylinder Beardmore engine and was armed with a single 0.303 in drum-fed Lewis Gun mounted above the centre section. This was later augmented by a similar weapon bracket-mounted to the port fuselage side behind the cockpit).

The G.100 was gradually succeeded by the G.102 with a 160 hp Beardmore engine. Maximum speed of the 160 hp aircraft was 108 mph (174 km/h) at sea-level falling to 100 mph (160 km/h) at 10,000 ft; it had a maximum ceiling of 14,000 ft (4,300 m).[1]

Operational use

The G.100 was built originally as a long range, single-seat fighter and escort machine but on the basis of its size and weight was reclassified as a day bomber.

Deliveries to the RFC commenced in mid 1916, a total of 270 being manufactured. The G.100 and G.102 Elephants were used in France and the Middle East, although only No. 27 Squadron, RFC was completely equipped with this type.

While not particularly successful as a fighter owing to its poor agility by comparison other fighters of the times, the Elephant performed a useful service in long-range bombing, carrying up to a 260 lb (120 kg) bomb load. It successfully performed this role from the summer of 1916 through to late 1917. It was also used for long-range photo reconnaissance, where stability and endurance were required (the type was capable of a five-and-a-half-hour flight).

Variants

  • Martinsyde G.100 : Single-seat fighter-scout, bomber and reconnaissance biplane, powered by a 120 hp (89 kW) Beardmore piston engine. 100 built.[2]
  • Martinsyde G.102 : Single-seat fighter-scout, bomber and reconnaissance biplane, powered by a 160 hp (119 kW) Beardmore piston engine. 171 built.[2]

Operators

 Australia
 United Kingdom

Specifications (G.100)

Data from The British Fighter since 1912[2]

General characteristics

  • Crew: One, pilot
  • Length: 26 ft 6 in (8.07 m)
  • Wingspan: 38 ft (11.59 m)
  • Height: 9 ft 8 in (2.95 m)
  • Wing area: 456 ft²[1] ()
  • Empty weight: 1,795 lb (816 kg)
  • Loaded weight: 2,424 lb (1,102 kg)
  • Powerplant: 1 × Beardmore straight 6-cylinder engine, 120 hp (90 kW)

Performance

Armament

  • Guns:
    ** 1 × 0.303 in Lewis gun mounted above upper wing centre section
    • 1 × Lewis gun mounted fixed aft of the cockpit pointing rearwards
  • Bombs: 260 lb (120 kg) bombload

See also

Related lists

References

  1. ↑ 1.0 1.1 1.2 1.3 Flight 1920 p641
  2. ↑ 2.0 2.1 2.2 2.3 Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  • Kenneth Munson Aircraft of World War I, 1967 Ian Allan ISBN 0-7110-0356-4
  • Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Martinsyde_G.100&oldid=717101224"