Members of the western concert flute family

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

The western concert flute family has a wide range of instruments.

Piccolo

The Piccolo.

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The piccolo is the highest-pitched member of the flute family, with a range an octave above that of the concert flute. It's usually the highest-pitched instrument within orchestras and bands. The piccolo has a stereotype for being difficult to play in tune; its small size makes it difficult to construct an evenly tuned scale.

Treble flute

File:Treble-flute-case.jpg
The Myall-Allen G Treble Flute.

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The treble flute is pitched in the key of G, a fifth above the concert flute. The instrument is rare today, only occasionally found in flute choirs or private collections.

Soprano flute

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

This distinctive sounding instrument is rarely found at present. A few American publications for flute choir currently include a part for an Eb (soprano) flute, an instrument pitched a minor third higher than the standard C flute. In these publications, an alternative part is provided either for the C Flute or for the piccolo.

Concert flute

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Concert flute in use.

The standard concert flute is by far the most common member of the flute family. The flute is used in many ensembles including concert bands, orchestras, flute ensembles, occasionally jazz bands and big bands.

The instrument is pitched in C and has a range of just over three octaves starting from the musical note C4 (corresponding to middle C on the piano), however, some experienced flautists are able to reach C8. Many professional flutes have a longer B-foot joint, which can reach B3.

Flûte d'amour

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The flûte d'amour or flauto d'amore is pitched in either A or B and is intermediate in size between the modern C concert flute and the alto flute in G. It is the mezzo soprano member of the flute family. It is sometimes referred to as a tenor flute. The range of the instrument is from A3 to E7. The B version is usually used for jazz because both the tenor saxophone and clarinet are in B.

Alto flute

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The alto flute.

The alto flute is characterized by its distinct, mellow tone in the lower portion of its range. The tube of the alto flute is considerably thicker and longer than a C flute and requires more breath from the player. However, this gives it a greater dynamic presence in the bottom octave and a half of its range. It is pitched in the key of G (sounding a 4th lower than written) with its range stretching from G3 to G6. The headjoint may be straight or curved.

Bass flute

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The bass flute is pitched in the key of C, an one octave below the concert flute. Because of the length of its tube (approximately 146 cm), it is usually made with a curved headjoint, sometimes in a "J" shape, to bring the embouchure hole within reach of the player. It is usually only used in flute choirs, as it is easily drowned out by other instruments of comparable register, such as the clarinet.

Contra-alto flute

The contra-alto flute (also called contrabass flute in G) is in the key of G, pitched one octave below the alto flute, and a fourth below the bass flute. It is so large that the instrument's body is held vertically, with an adjustable floor peg similar to that of the bass clarinet.

Contrabass flute

The contrabass flute.

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The contrabass flute (sometimes also called octobass flute) is used mostly in flute ensembles. Its range is similar to that of the regular concert flute, except that it is pitched two octaves lower; the lowest performable note is two octaves below middle C (equivalent to the lowest C on the cello). Many contrabass flutes in C are also equipped with a low B, (in the same manner as many modern standard sized flutes are). The contra-alto flute is sometimes referred to as a contrabass flute in G.

Subcontrabass flute

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

An instrument in the key of G, pitched a fourth below the contrabass flute in C and two octaves below the alto flute in G; it is sometimes also called a double contra-alto flute.

Double contrabass flute

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The double contrabass flute (sometimes also called octobass flute) is pitched in the key of C, three octaves below the concert flute (two octaves below the bass flute, and one octave below the contrabass flute). Its lowest note is C1, one octave below the cello's lowest C. Despite the tendency of the larger sizes of flute to be quiet, the double contrabass flute has a surprisingly powerful tone, though it benefits from amplification in ensembles.

Hyperbass flute

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Roberto Fabbriciani with hyperbass flute.

The hyperbass flute is the largest and lowest instrument in the flute family. It is pitched in C, four octaves below the concert flute (and three octaves below the bass flute, two octaves below the contrabass flute, and one octave below the double contrabass flute). It is made of PVC and wood, its tubing is over 8 meters in length and its lowest note is the C one octave below the lowest C on the piano (16 Hz), below what is generally considered the range of human hearing. The only known example of the instrument is a prototype built for Italian flautist Roberto Fabbriciani (b. Arezzo, 1949) by Francesco Romei, a Florentine craftsman.