microKORG

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Lua error in package.lua at line 80: module 'strict' not found. Lua error in package.lua at line 80: module 'strict' not found.

The microKORG
The microKORG XL

The microKORG is a MIDI-capable virtual analog synthesizer/vocoder from Korg featuring DSP analog modelling. The synth/keyboard is built in such a way that it is essentially a Korg MS-2000 with programmable step arpeggiator (MS-2000 has only six simple patterns), a less advanced vocoder (8 bands instead of 16 bands found on the MS-2000), lack of motion sequencing (MS-2000 had three motion sequences), lack of an XLR microphone input, and in a smaller case with fewer real-time control knobs.

The microKORG was released in 2002 and is still in production as of 2014. In September 2007 Korg released a limited edition of the microKORG with reverse-color keys although the functionality was otherwise unchanged. At NAMM 2008, a successor called the microKORG XL was introduced.[1] Available since early 2009 it uses MMT Multi Modeling Technology from Korg's newer and more powerful Radias/R3 synthesizers.

later models based on MMT
Korg RADIAS
Korg R3

Synthesis

The microKORG uses DSP technology to emulate the sounds of an analog synthesizer using firmware. The fundamental unit of sound is, in Korg's terminology, a "timbre". This is generated with a pair of multi-function oscillators. Two timbres can be combined to create a four-oscillator "layer". This can be used to create more complex sounds, although it halves the polyphony from four notes to two. A single timbre can be played in four-voice. Oscillator one (OSC1) can produce one of several fundamental waveforms, including saw, square, triangle, and sine waves. Alternatively, OSC1 can produce a vox wave (for simulating human vocal cords), white noise, and one of 64 different digital waveforms that were created by harmonic additive synthesis. Some of these 64 waveforms were originally featured in the Korg DW-8000 digital synthesizer of the late 1980s. The second oscillator (OSC2) is limited to saw, square, and triangle waveforms.

Each waveform on OSC1 has a unique modulation feature, including wave morphing, Pulse-width modulation, and FM. OSC2 can be detuned, synchronized, and/or ring-modulated with OSC1 in order to create more complex sounds. OSC1 can also be replaced with the signal from one of the line-level inputs on the back of the unit, allowing external signals to be processed with the effects and filters of the microKORG, or potentially ring-modulated by OSC2.

The microKORG also uses effects such as flange, ensemble, phaser, and digital delay, which can also be applied to external signals. The unit also features two independent LFOs, with six different waveforms, which can be used to create more complex modulations.

When playing a single timbre the keyboard has four-voice polyphony. In layer mode it generally has two-voice polyphony, although one combination of polyphonic/mono layers allows for three-voice polyphony of the second timbre.

The microKORG groups its 128 factory preset sound patches into 8 groups:

A large knob changes the selected sound group. Each group has 16 different patches (2 banks of 8), selected by the 8 lighted buttons on the front with a side A/B button to toggle between sets of 8. All patches are user editable, and do not necessarily have to follow the groupings listed on the face plate.

microKORG XL

microKORG XL

The direct successor to the microKORG, the microKORG XL, utilises MMT Analog modelling, and is based on Korg's own R3. The XL features a brand-new LCD display, and two Program Select knobs for easier access.

The microKORG XL groups its 128 factory preset sound patches into 8 groups:

and several sub categories:

New features specific to the microKORG XL

Notably, the microKORG XL features 17 different KAOSS derived effects, including phaser, flange, decimation, vibrato, tremolo and retrigger. The XL also features several included PCM Waveforms, including Piano, Brass Ensemble, 9 Electric Piano and Clavinet, 7 organ sounds (one of which emulates the Korg M1 Organ), a full String Orchestra, 2 variable formant waves and more than 32 digitally generated waveforms (SYNWAVE 6 is a ramp wave/inverted sawtooth.) The XL adds two additional Waveform Modulation types: Phase Modulation and Unison (in which 5 stacked oscillators within 1 oscillator can be detuned and phased to achieve a richer sound.) The Unison Simulator is similar to the Supersaw waveform on the Roland JP-8000. The included "OSC MOD WAVEFORM" and "OSC2 SYNC" controllers are reminiscent of the Poly-Mod feature in the Sequential Circuits Prophet-5. The microKORG XL also includes a waveshaper (uncommon in most synthesizers) which will morph the current waveform into an approximation of the waveform desired, resulting in a harsh sound. The waveshaper also includes a third oscillator (Sub oscillator.)

Additional improvements include:

  • Polyphony increased up to 8 notes
  • Vocoder increased to 16 bands, but still supports the 4 note polyphony
  • USB connector for MIDI over USB operation
  • "Split" and "Multi" added to Voice modes
  • The option to use 10 scales, including one defined by the user.
  • "Analog Tune" simulates the pitch instability and oscillator “drift” that was characteristic of vintage analog synthesizers

Competing products

The MicroKORG was released during the same period as several similar products:

The microKORG shared several features with the earlier, discontinued Quasimidi Sirius - in particular a built-in vocoder - although the Sirius used distinctively unique analog modeling - sample playback hybrid synthesis.

References

  1. Lua error in package.lua at line 80: module 'strict' not found.

External links