Gal (unit)
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
The gal, sometimes called galileo, (symbol Gal) is a unit of acceleration used extensively in the science of gravimetry.[1][2][3] The gal is defined as 1 centimeter per second squared (1 cm/s2). The milligal (mGal) and microgal (µGal) refer respectively to one thousandth and one millionth of a gal.
The gal is not part of the International System of Units (known by its French-language initials "SI"). In 1978 the CIPM decided that it was permissible to use the gal "with the SI until the CIPM considers that [its] use is no longer necessary."[2][4] However, use of the gal is deprecated by ISO 80000-3:2006.
The gal is a derived unit, defined in terms of the centimeter-gram-second (CGS) base unit of length, the centimeter, and the second, which is the base unit of time in both the CGS as well as the modern SI system. In SI base units, 1 Gal is equal to 0.01 m/s2.
The acceleration due to Earth’s gravity (see Standard gravity) at its surface is 976 to 983 Gal, the variation being due mainly to differences in latitude and elevation. Mountains and masses of lesser density within the Earth's crust typically cause variations in gravitational acceleration of tens to hundreds of milligals (mGal). The gravity gradient (variation with height) above Earth's surface is about 3.1 µGal per centimeter of height (3.1×10−6 s−2), resulting in a maximum difference of about 2 Gal (0.02 m/s2) from the top of Mount Everest to sea level.[5]
Unless it is being used at the beginning of a sentence or in paragraph or section titles, the unit name gal is properly spelled with a lowercase g. As with the torr and its symbol, the unit name (gal) and its symbol (Gal) are spelled identically except that the latter is capitalized.
The gal is named after Galileo Galilei, a physicist who made the first[citation needed] measurements of the Earth's gravity.
Conversions
| Base value | (Gal, or cm/s2) | (ft/s2) | (m/s2) | (Standard gravity, g0) |
|---|---|---|---|---|
| 1 Gal, or cm/s2 | 1 | 0.0328084 | 0.01 | 0.00101972 |
| 1 ft/s2 | 30.4800 | 1 | 0.304800 | 0.0310810 |
| 1 m/s2 | 100 | 3.28084 | 1 | 0.101972 |
| 1 g0 | 980.665 | 32.1740 | 9.80665 | 1 |
See also
- Units of acceleration
- g-force (g) (related to Standard gravity and Earth’s gravity)
- Metre per second squared (meter per second squared or m/s2)
- Foot per second squared (or ft/s2)
- Related articles
References
- ↑ Barry N. Taylor, Guide for the Use of the International System of Units (SI), 1995, NIST Special Publication 811, Appendix B.
- ↑ 2.0 2.1 BIPM SI brochure, 8th ed. 2006, Table 9: Non-SI units associated with the CGS and the CGS-Gaussian system of units.
- ↑ Some sources, such as the University of North Carolina, the European Space Agency, and ConversionTables.com state that the unit name is "galileo". The NIST and the BIPM are here considered as more authoritative sources regarding the proper unit name.
- ↑ NIST Guide to SI Units; Section 5, Units Outside the SI; Subsection 5.2: Units temporarily accepted for use with the SI.
- ↑ Gravity Measurements. University of Calgary. http://www.geo.ucalgary.ca/~wu/Goph547/Gravimeters.pdf Accessed Nov 21, 2009.
<templatestyles src="Asbox/styles.css"></templatestyles>
 |
This geodesy-related article is a stub. You can help Wikipedia by expanding it. |
