Monotonic function

From Infogalactic: the planetary knowledge core
(Redirected from Monotone increasing)
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Lua error in package.lua at line 80: module 'strict' not found.

Figure 1. A monotonically increasing function. It is strictly increasing on the left and right while just non-decreasing in the middle.
Figure 2. A monotonically decreasing function
Figure 3. A function that is not monotonic

In mathematics, a monotonic function (or monotone function) is a function between ordered sets that preserves the given order. This concept first arose in calculus, and was later generalized to the more abstract setting of order theory.

Monotonicity in calculus and analysis

In calculus, a function f defined on a subset of the real numbers with real values is called monotonic if and only if it is either entirely increasing or decreasing. It is called monotonically increasing (also increasing or nondecreasing), if for all x and y such that x \leq y one has f\!\left(x\right) \leq f\!\left(y\right), so f preserves the order (see Figure 1). Likewise, a function is called monotonically decreasing (also decreasing or nonincreasing) if, whenever x \leq y, then f\!\left(x\right) \geq f\!\left(y\right), so it reverses the order (see Figure 2).

If the order \leq in the definition of monotonicity is replaced by the strict order <, then one obtains a stronger requirement. A function with this property is called strictly increasing. Again, by inverting the order symbol, one finds a corresponding concept called strictly decreasing. Functions that are strictly increasing or decreasing are one-to-one (because for x not equal to y, either x < y or x > y and so, by monotonicity, either f\!\left(x\right) < f\!\left(y\right) or f\!\left(x\right) > f\!\left(y\right), thus f\!\left(x\right) is not equal to f\!\left(y\right).)

When functions between discrete sets are considered in combinatorics, it is not always obvious that "increasing" and "decreasing" are taken to include the possibility of repeating the same value at successive arguments, so one finds the terms weakly increasing and weakly decreasing to stress this possibility.

The terms "non-decreasing" and "non-increasing" should not be confused with the (much weaker) negative qualifications "not decreasing" and "not increasing". For example, the function of figure 3 first falls, then rises, then falls again. It is therefore not decreasing and not increasing, but it is neither non-decreasing nor non-increasing.

The term monotonic transformation can also possibly cause some confusion because it refers to a transformation by a strictly increasing function. Notably, this is the case in economics with respect to the ordinal properties of a utility function being preserved across a monotonic transform (see also monotone preferences).[1]

A function f\!\left(x\right) is said to be absolutely monotonic over an interval \left(a, b\right) if the derivatives of all orders of f are nonnegative at all points on the interval.

Some basic applications and results

The following properties are true for a monotonic function f\colon \mathbb{R} \to \mathbb{R}:

These properties are the reason why monotonic functions are useful in technical work in analysis. Two facts about these functions are:

An important application of monotonic functions is in probability theory. If X is a random variable, its cumulative distribution function F_X\!\left(x\right) = \text{Prob}\!\left(X \leq x\right) is a monotonically increasing function.

A function is unimodal if it is monotonically increasing up to some point (the mode) and then monotonically decreasing.

When f is a strictly monotonic function, then f is injective on its domain, and if T is the range of f, then there is an inverse function on T for f.

Monotonicity in topology

A map f : X → Y is said to be monotone if each of its fibers is connected i.e. for each element y in Y the (possibly empty) set f−1(y) is connected.

Monotonicity in functional analysis

In functional analysis on a topological vector space X, a (possibly non-linear) operator T : X → X is said to be a monotone operator if

(Tu - Tv, u - v) \geq 0 \quad \forall u,v \in X.

Kachurovskii's theorem shows that convex functions on Banach spaces have monotonic operators as their derivatives.

A subset G of X × X is said to be a monotone set if for every pair [u1,w1] and [u2,w2] in G,

(w_1 - w_2, u_1 - u_2) \geq 0.

G is said to be maximal monotone if it is maximal among all monotone sets in the sense of set inclusion. The graph of a monotone operator G(T) is a monotone set. A monotone operator is said to be maximal monotone if its graph is a maximal monotone set.

Monotonicity in order theory

Order theory deals with arbitrary partially ordered sets and preordered sets in addition to real numbers. The above definition of monotonicity is relevant in these cases as well. However, the terms "increasing" and "decreasing" are avoided, since their conventional pictorial representation does not apply to orders that are not total. Furthermore, the strict relations < and > are of little use in many non-total orders and hence no additional terminology is introduced for them.

A monotone function is also called isotone, or order-preserving. The dual notion is often called antitone, anti-monotone, or order-reversing. Hence, an antitone function f satisfies the property

xy implies f(x) ≥ f(y),

for all x and y in its domain. The composite of two monotone mappings is also monotone.

A constant function is both monotone and antitone; conversely, if f is both monotone and antitone, and if the domain of f is a lattice, then f must be constant.

Monotone functions are central in order theory. They appear in most articles on the subject and examples from special applications are found in these places. Some notable special monotone functions are order embeddings (functions for which xy if and only if f(x) ≤ f(y)) and order isomorphisms (surjective order embeddings).

Monotonicity in the context of search algorithms

In the context of search algorithms monotonicity (also called consistency) is a condition applied to heuristic functions. A heuristic h(n) is monotonic if, for every node n and every successor n' of n generated by any action a, the estimated cost of reaching the goal from n is no greater than the step cost of getting to n' plus the estimated cost of reaching the goal from n' ,

h(n) \leq c(n, a, n') + h(n').

This is a form of triangle inequality, with n, n', and the goal Gn closest to n. Because every monotonic heuristic is also admissible, monotonicity is a stricter requirement than admissibility. In some heuristic algorithms, such as A*, the algorithm can be considered optimal if it is monotonic.[2]

Boolean functions

In Boolean algebra, a monotonic function is one such that for all ai and bi in {0,1}, if a1b1, a2b2, ..., anbn (i.e. the Cartesian product {0, 1}n is ordered coordinatewise), then f(a1, ..., an) ≤ f(b1, ..., bn). In other words, a Boolean function is monotonic if, for every combination of inputs, switching one of the inputs from false to true can only cause the output to switch from false to true and not from true to false. Graphically, this means that a Boolean function is monotonic when in its Hasse diagram (dual of its Venn diagram), there is no 1 (red vertex) connected to a higher 0 (white vertex).[clarification needed]

The monotonic Boolean functions are precisely those that can be defined by an expression combining the inputs (which may appear more than once) using only the operators and and or (in particular not is forbidden). For instance "at least two of a,b,c hold" is a monotonic function of a,b,c, since it can be written for instance as ((a and b) or (a and c) or (b and c)).

The number of such functions on n variables is known as the Dedekind number of n.

See also

Notes

  1. See the section on Cardinal Versus Ordinal Utility in Simon & Blume (1994).
  2. Conditions for optimality: Admissibility and consistency pg. 94-95 (Russell & Norvig 2010).

Bibliography

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found. (Definition 9.31)

External links