This is a good article. Click here for more information.

New Jersey Route 64

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

x70px

Route 64
290x172px
Route information
Maintained by New Jersey Department of Transportation
Length: 0.32 mi[2] (0.51 km)
Existed: 1953 (Constructed in 1939)[1] – present
Major junctions
South end: CR 526 / CR 571 / CR 615 in West Windsor
North end: CR 526 / CR 571 in West Windsor
Highway system
Route 63 Route 65 x20px

Route 64 is a 0.32-mile (0.51 km) long state highway in the U.S. state of New Jersey. It is a state-maintained bridge over Amtrak and New Jersey Transit's Northeast Corridor line in West Windsor. Route 64 begins at an intersection with County Route 526 and County Route 571 in West Windsor. It heads along the bridge to an intersection with County Route 615, where Route 64 ends. County routes 526 and 571, which are unofficially concurrent with Route 64, continues to Hightstown.

Route 64 was designated originally as an alignment of Route 31A, a spur off of State Highway Route 31 (currently U.S. Route 206) from Princeton eastward to Hightstown, where it met State Highway Route 33. The state planned on turning the alignment into a full-fledged expressway for several decades, including constructing the alignment that Route 64 currently uses in 1939. The route was amended in 1941, and was renumbered from Route 31A to Route 64 in the 1953 renumbering. Route 64 was proposed to become part of the Princeton–Hightstown Bypass (later designated New Jersey Route 92), but completion never occurred. Currently, the route remains the bridge over the Northeast Corridor. However, it is not currently planned that Route 64 will receive an extension of sorts from the proposed Penns Neck Bypass to U.S. Route 1, a proposed realignment of County routes 526 and 571.

Route description

New Jersey Route 64 heading northbound
Route 64 heading northbound in West Windsor towards Penns Neck
File:NJ Route 64 northbound video.webm
Video showing the entire length of Route 64 northbound

Route 64 begins at an intersection with County Route 526, County Route 571, and Mercer County Route 615 in the community of West Windsor. From this point, County Routes 526 and 571 continue along the right-of-way towards U.S. Route 130. The route heads north crosses over the Amtrak and New Jersey Transit-used Northeast Corridor Line and passes to the north of a local bus depot. Route 64 continues westward for a short distance, crossing through a local woodland and behind several local homes. The route makes a gradual curve to the west off the railroad bridge and passes behind a couple of homes before heading to the south slightly at an intersection. Route 64 reaches its northern terminus and County Route 526 and County Route 571 make a right turn to head northwest toward U.S. Route 1 and Princeton.[3]

History

File:Former Route 31-A heading westward from Railroad tracks.jpg
The former alignment of Route 31-A running to the south of Route 64

Route 31A and the original freeway

In the late-1920s, the state proposed a bypass along the alignment. In 1938, the New Jersey State Highway Department and New Jersey General Assembly put forth a proposal detailing that a highway from State Highway Route 31 (co-signed with U.S. Route 206) in the city of Princeton eastward through Mercer County onto current-day County Route 571. From there, it would follow an alignment of highway to the intersection with State Highway Route 33 in the community of Hightstown. The original proposal for the highway was to turn the road into a limited-access freeway along its entirety. The route was designated as State Highway Route 31A, a suffixed spur of State Highway Route 31 that year.[4] A portion of the highway was constructed in 1939, when a bridge over the Pennsylvania Railroad was constructed from Washington Road's former alignment to the current intersection with Route 615.[1] This new, 104.00 feet (31.70 m) long bridge replaced the at-grade crossing on Washington Road,[5] which is now a dead-end.[6] The state highway law was amended just three years later, with the freeway option removed and the extensions remaining.[7]

File:NJ 31A (cutout).svg
Route 31A (1938-1953)

The new bridge remained in place along Route 31A, however, no new portions of the freeway were constructed in terms of creating the Route 31A Freeway, as proposed in 1938.[4] In 1950, then-governor of New Jersey, Alfred E. Driscoll, cited the need for the expressway as an important truck and passenger car highway from Trenton to the Jersey Shore.[8] Route 31A itself was decommissioned in the 1953 New Jersey state highway renumbering, and replaced by the designation of Route 64.[9] The route was truncated from both ends toward Princeton and Hightstown, leaving just the bridge in West Windsor.[10] Route 31A remained in the state highway statutes for several decades after decommissioning, with a bill in 1991 being proposed. The bill passed, and Route 31A was stripped from the statutes on January 18, 1992.[11]

Route 92 and future changes to CR 571

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

File:Route 133 Begin.jpg
Route 133 west at the eastern beginning. Route 133 was a portion of the partially completed Route 92

Route 64, after designation in 1953,[9] remained a short bridge along the highway.[12] However, the need for an expressway from Trenton to the Jersey Shore remained, and in the late 1950s, the State Highway Department brought about plans for the Princeton–Hightstown Bypass, a four-lane freeway that would head for 14 miles (23 km) from U.S. Route 206 in Montgomery Township to New Jersey Route 33 in Hightstown. In the length, the freeway was to interchange with U.S. Route 1, U.S. Route 130 and New Jersey Route 27. The route was re-designated as Route 92,[13] and remained a high priority project for several decades. Even after changes in alignment, Route 64 was still an alternative.[14] However, Route 92 was shelved on December 1, 2006 in favor of widening the New Jersey Turnpike mainline,[15] and only New Jersey Route 133 was constructed for the proposal.[16]

As part of the proposed Penns Neck Bypass on U.S. Route 1, the New Jersey Department of Transportation plans on realigning County Route 571 and Route 526 from the western terminus of Route 64 to a northerly route to Route 1.[17] Although Route 571 and Route 526 are proposed to be realigned onto the new alignment, there is no designated change proposed for Route 64. On the contrary to this, one state figure shows Route 64 running along Washington Road, where the two county routes currently run.[17][18]

Major intersections

The entire route is in West Windsor, Mercer County.

mi[2] km Destinations Notes
0.00 0.00 CR 526 east / CR 571 south / CR 615 north (Hightstown Road) – Hightstown, Grovers Mill, Cranbury Southern terminus of County Route 615
0.32 0.51 CR 526 west / CR 571 north (Washington Road)
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

References

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. 9.0 9.1 Lua error in package.lua at line 80: module 'strict' not found.
  10. State of New Jersey, Laws of 1953, Chapter 112, Page 1298, Section 1.
  11. State of New Jersey, Laws of 1991, Page 1298, Section 2.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. 17.0 17.1 Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.

External links

Script error: No such module "Attached KML".

  • Media related to Lua error in package.lua at line 80: module 'strict' not found. at Wikimedia Commons
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.