Peavey 5150

The Peavey 5150 is an all-tube guitar amplifier made by Peavey Electronics from 1992 on, initially as a signature model for Eddie Van Halen. Since Van Halen and Peavey parted ways in 2004, the name of the model was changed to Peavey 6505, with Van Halen taking the 5150 name for his company, EVH, to name his 5150 III amplifier. Thus, the 6505 was named in celebration of Peavey's 40th anniversary (1965–2005).

Several aspects of the amplifier, likely responsible for its success, are its rigid construction and reliability, excellent frequency response (largely attributable to the vacuum tube amplification), and clarity with heavy gain; a feature generally synonymous with the amplifier image among its market demographic.

While the product was engineered, designed around a centered PCB, an aspect sometimes considered "impure" among audiophiles, its cascading five preamps (four preamplifiers and one phase inverter) and four power tubes were exceptionally implemented in a simplistic manner, allowing individual components to carry themselves (such as exceptional transformer placement to ensure acoustical integrity ie. minimizing transconductance) in addition to commonizing the systems' ground by way of multilayer PCB, a large source of unwanted nuances at the least in most poorly grounded musical applications.

The Peavey 5150 I shipped with four Ruby Tube 6L6 Power Tubes, and five 12AX7 Tubes in the preamplifier staging (with one as a phase inverter.) Despite its shared "plain" PCB, each component was generally high quality, allowing manufacturing ease while providing high quality tone at an affordable price.

A defining attribute largely responsible for the 5150 sound is the fixed bias. Commonly described analog a car engine and its respective idle, the 5150 bias was set to a lower value (lower engine "idle") which resulted in the Power Tubes running at a lower energy commonly known as "cold-biased." While the electrical theory behind this can easily be examined and theoreticized, the 5150 and its configuration resulted in a more controllable gain setting (ie. having a more forgiving sonic range than similarly "hot-biased" configurations. This engineering choice set the 5150 up to intrinsically sound its best with minimal augmentation. Since tube-amps are still uncontested in music amplification as far as tonal quality is concerned, (see hard-clipping) the optimal setting for tubes are when they are pushed to natural distortion (ie. Increases in "volume" or Bells(dB).) Thus, by allowing such a heavy amount of gain to be applied without sacrificing tonal definition, the amplifier could then be pushed due to the "colder" biasing requiring more current, versus a "hotter" setting from the beginning (volume knob or potentiometer knob "value of 1.")

While able to stand among modern technology as a relatively "simple" design, especially in comparison to boutique "hand-wired" variants, the reliability and era its inception welcomed helped verify its cultural significance in Hard Rock, later Metal, as a unique product with a unique tone.

Both the 5150 and the 6505 are well known for its high gain overdrive channel, and has seen widespread use by rock, hardcore and metal guitarists. An early breakthrough was its use by Colin Richardson and Andy Sneap, two "seminal" British producers of heavy metal; especially Machine Head's Burn My Eyes (1994) helped the 5150 gain a reputation for its sound, which "defined a generation of guitar tone". Other notable artists and producers to use the 5150/6505 include Jason Suecof, Matt Tuck and Dino Cazares.

Versions

Although some players believe that the 5150 (particularly the "block letter 5150") to be better-sounding than the 6505, the only difference is that the original 5150s shipped with higher quality tubes. However, these tubes have most likely been replaced, as they are now over 20 years old.

5150 / 6505

The 6505 is the base model of the series, and is identical to the 5150, with exception of the stock tubes and its name. It has five 12AX7 tubes in the preamp, and four 6L6GC tubes in the power section. It has 120 watts RMS output power, into 16, 8 or 4 Ohms. The effects loop can be bypassed with a footswitch. It features separate input for both high and low gain.

It has 2 channels, Rhythm and lead. Each channel has a separate pre-/postgain control, and the rhythm has an extra crunch and bright switch. The channels share a 3-Band EQ and presence and resonance controls. Switching channels can be done both via the front panel of the amp, or with the remote footswitch.

It is also available in a 60 watt 2×12 combo. The 2×12 combo features 60 watts of RMS output power into 16 or 8ohms. It also features five 12AX7 preamps tubes and two 6L6GC power amp tubes.

5150II / 6505 Plus

The 6505+ is a second version of the 6505 and is identical to the 5150II. It features an extra 12AX7 tube in the preampstage, to prevent breakup in the clean channel. It features separate 3-band EQ, presence and resonance controls for the 2 channels. It also features only one input, unlike the 6505, which had two. There are bias testpoints on the back, making changes to the tubes easier.

It is available in a 60 watt 1x12 combo (Called 6505+112), of which the internal circuitry is identical to that of the head, with exception of using 2 instead of 4 6L6GC powertubes an additional 3-spring reverb. It is made in China to cut costs.

6534+ Plus

This version is identical to the 6505+, but uses EL34 tubes instead of 6L6GC tubes in the power section. It was created as a response to the growing demand of high-gain EL34 amplifiers, previously found almost solely in Marshall and ENGL amplifiers, both European brands