Pegasus 3

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Pegasus 3
Pegasus satellite.jpg
A Pegasus satellite in orbit
Operator NASA
COSPAR ID 1965-060A
Mission duration 1 year (design)
3 years (achieved)
Spacecraft properties
Spacecraft type Pegasus
Manufacturer Fairchild Hiller
Launch mass 10,323 kilograms (22,758 lb)
Payload mass 1,450 kilograms (3,200 lb)
Start of mission
Launch date 30 July 1965, 13:00:00 (1965-07-30UTC13Z) UTC
Rocket Saturn I SA-10
Launch site Cape Canaveral LC-37B
End of mission
Disposal Decommissioned
Deactivated 29 August 1968 (1968-08-30)
Decay date 4 August 1969
Orbital parameters
Reference system Geocentric
Regime Low Earth
Perigee 516 kilometers (321 mi)
Apogee 536 kilometers (333 mi)
Inclination 28.8 degrees
Period 95.15 minutes
Epoch 3 September 1965

Pegasus 3 or III, also known as Pegasus C before launch, was an American satellite which was launched in 1965 to study micrometeoroid impacts in Low Earth orbit. It was the last of three Pegasus satellites to be launched, the previous two having been launched earlier the same year. It was manufactured by Fairchild Hiller, and operated by NASA.

Spacecraft

Pegasus 3 was a Pegasus spacecraft, consisting of 1,450 kilograms (3,200 lb) of instruments, attached to the S-IV upper stage of the carrier rocket which had placed it into orbit.[1] It had a total mass of 10,323 kilograms (22,758 lb),[2] and was equipped with two sets of micrometeoroid detection panels, and a radio for tracking and returning data.[1] The panels were 29 metres (95 ft) long, and equipped with 116 individual detectors.[3]

Launch

Pegasus 3 was launched atop a Saturn I rocket, serial number SA-10,[4] flying from Launch Complex 37B at the Cape Kennedy Air Force Station. The launch occurred at 13:00:00 UTC on 30 July 1965.[5] Following launch, Pegasus 3 was given the COSPAR designation 1965-060A, whilst NORAD assigned it the Satellite Catalog Number 01467.[6]

Pegasus 3 was a secondary payload on the carrier rocket, which was carrying a boilerplate Apollo spacecraft, Apollo 105 or BP-9A,[5] as part of a series of configuration tests for the Apollo program. The Apollo boilerplate acted as a payload fairing for the Pegasus spacecraft, which was stored inside what would have been the Service Module of a functional spacecraft. Upon reaching orbit, the boilerplate Command and Service modules were jettisoned.[1]

Operations

Pegasus 3 was operated in a low Earth orbit. On 3 September 1965 it was catalogued as being in an orbit with a perigee of 516 kilometers (279 nmi) and an apogee of 536 kilometers (289 nmi), inclined at 51.6 degrees to the equator and with a period of 95.15 minutes.[7] Once in orbit, the panels were deployed to detect micrometeoroid impacts. Experiment results were returned to Earth by radio.[1] The spacecraft operated until 29 August 1968, and subsequently remained in orbit until it decayed and reentered the atmosphere on 4 August 1969.[7] It had originally only been expected to operate for 720 days.

See also

References

  1. 1.0 1.1 1.2 1.3 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. 7.0 7.1 Lua error in package.lua at line 80: module 'strict' not found.