Pennsylvania Canal (North Branch Division)
| North Branch Pennsylvania Canal | |
|
North Branch Canal near Shickshinny in about 1900
|
|
| Country | United States |
|---|---|
| State | Pennsylvania |
| Branch of | Pennsylvania Canal |
| Connected to | Junction Canal, Susquehanna Division Canal, West Branch Canal |
| Northern end | Chemung River |
| - location | near Athens, Bradford County |
| - elevation | 754 ft (230 m) |
| - coordinates | Lua error in package.lua at line 80: module 'strict' not found. [1][n 1] |
| Southern end | Susquehanna River |
| - location | Northumberland, Northumberland County |
| - elevation | 420 ft (128 m) [3] |
| - coordinates | Lua error in package.lua at line 80: module 'strict' not found. [4][n 2] |
| Length | 169 mi (272 km) |
| Original owner | Commonwealth of Pennsylvania |
| Construction began | 1828 |
| Date completed | 1856 |
| Number of locks | 43 |
| Status | Historic, abandoned |
 Map of historic Pennsylvania canals
|
|
The North Branch Division of the Pennsylvania Canal was an historic waterway that ran 169 miles (272 km) along the North Branch Susquehanna River between southern New York and north-central Pennsylvania in the United States. At its southern end, the canal connected with the West Branch Canal and the Susquehanna Division Canal at Northumberland, while on the north it connected with the Junction Canal and the New York canal system. Built between 1828 and 1856, the North Branch Canal was part of a large transportation network that included Pennsylvania's Main Line of Public Works.[5]
Contents
History
The first segment of 55 miles (89 km) was begun in 1828 and completed in 1831 to Nanticoke Falls. In 1834, a project called the Wyoming Extension increased the canal's length by 17 miles (27 km) past Wilkes-Barre to Pittston. A final extension of 97 miles (156 km) from Pittston to the New York state line was started in 1836 and finished in 1856.[5]
The complete canal had a total of 43 locks that overcame 334 feet (102 m) of elevation between its end points.[5] The southern end was 420 feet (130 m)[3] above sea level, and the northern end was at 754 feet (230 m).[n 3]
The privately built Junction Canal of 18 miles (29 km) linked the North Branch Canal to Elmira. There the Junction Canal connected with the Chemung Canal, which led north to Seneca Lake and the Erie Canal. Through these connections, boats using the Pennsylvania Canal system were able to travel as far as Buffalo and Lake Champlain.[5]
In 1858, the canal from Northampton Street in Wilkes-Barre to the state line was sold to the North Branch Canal Company, which in turn sold it to the Lehigh Valley Railroad in 1865. The railroad laid tracks along portions of the canal towpath and operated both until 1872, when it was authorized by the state legislature to close the canal.[6]
Locks (first segment)
| No.[7] | Lift[7] | Canal mile[7] (km) |
Remarks[7] |
|---|---|---|---|
|
|
|
0.0 miles 0.0 km |
Northumberland Canal Basin |
| 1 | 11.49 feet (3.50 m) | 1.2 miles (1.9 km) |
|
| 2 | 11.21 feet (3.42 m) | 14.2 miles (22.9 km) | 2 miles (3.2 km) above Danville |
| 3 | 10.65 feet (3.25 m) | 21.7 miles (34.9 km) | Rupert |
| 4 | 5.51 feet (1.68 m) | 23.1 miles (37.2 km) | Bloomsburg |
| 5 | 9.63 feet (2.94 m) | 30.0 miles (48.3 km) | Stoneytown |
| 6 | 8.48 feet (2.58 m) | 36.2 miles (58.3 km) | Berwick |
| 7 | 8.92 feet (2.72 m) | 39.3 miles (63.2 km) | Beach Haven |
| 8 | 1.93 feet (0.59 m) | 55.8 miles (89.8 km) | Guard lock at Nanticoke |
Chenango Extension
In 1863, the New York Legislature authorized construction of another canal, the Chenango Canal Extension, meant to run about 40 miles (64 km) along the North Branch Susquehanna River from Binghamton, New York, to the Pennsylvania – New York border. The plans called for construction of an east–west crosscut canal linking the Chenango Canal Extension to the North Branch Canal, which followed the Chemung River rather than the North Branch Susquehanna River north of Athens. Cost overruns, waning enthusiasm for canals, and funding delays led to abandonment of the project in 1872, after most of the work on the northern 30 miles (48 km) of the line had been completed. Beyond planning, no work had been done on the southernmost 10 miles (16 km) when the project ended.[8]
Remnants
Susquehanna Riverlands in Salem Township, 8 miles (13 km) south of Wilkes-Barre, has 0.5 miles (0.8 km) of river walking path and filled canal owned and managed by Pennsylvania Power and Light Company.[9]
Lock No. 1 and a section of the original North Branch Canal in Northumberland were intact in 1986 as was Lock No. 2 below Bloomsburg. Occasional sections of canal bed remained between Shickshinny and West Nanticoke, and the West Nanticoke guard lock was intact. Canal bed was visible from the Lackawanna River toward Ransom and largely intact above Vosburg between Lackawanna Campground and Horse Race Falls. At Laceyville a museum known as the Oldest House was once a lockkeeper's house. Other remnants such as crib work, canal embankments, iron spikes, and timbers could be found here and there along the full length of the canal.[10]
Points of interest
| Feature | Coordinates | Description |
|---|---|---|
| Athens | Lua error in package.lua at line 80: module 'strict' not found.[1] | Town near the northern terminus |
| Wilkes-Barre | Lua error in package.lua at line 80: module 'strict' not found.[11] | City near the midpoint of the canal |
| Northumberland | Lua error in package.lua at line 80: module 'strict' not found.[4] | Town at the southern terminus |
See also
Notes and references
- Notes
- ↑ Coordinates derived from Google Earth with reference to Figure 23 in Petrullo's Anthracite and Slackwater showing the location of the canal along the west bank of the Chemung River at the Pennsylvania – New York border.[2]
- ↑ These are the Geographic Names Information System (GNIS) coordinates for the mouth of the West Branch Susquehanna River, which meets the North Branch at Northumberland, the historic southern end of the North Branch Canal.[3]
- ↑ Derived by adding the combined lift of the locks, 334 feet (102 m), to the elevation of the North Branch Susquehanna River (identical to the elevation of the West Branch Susquehanna River) at Northumberland, 420 feet (130 m).
- References
- ↑ 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Petrullo, p. 101
- ↑ 3.0 3.1 3.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 5.0 5.1 5.2 5.3 Shank, pp. 51–52
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 7.0 7.1 7.2 7.3 Shank, p. 115
- ↑ Whitford and Beal, Chapter 18
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Petrillo (1986), pp. 237–242
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
Works cited
- Petrillo, F. Charles (1986). Anthracite and Slackwater: The North Branch Canal 1828–1901. Easton, Pennsylvania: Center for Canal History and Technology. ISBN 0-930973-04-6.
- Shank, William H. (1986). The Amazing Pennsylvania Canals, 150th Anniversary Edition. York, Pennsylvania: American Canal and Transportation Center. ISBN 0-933788-37-1.
- Whitford, Nobel E., and Beal, Minnie M. (1906). History of the Canal System of the State of New York Together with Brief Histories of the Canals of the United States and Canada, "Chapter 18: The Chenango Canal Extension". Albany, New York: Brandow Printing Company. OCLC 2059401. Retrieved March 21, 2010.
