Pennsylvania State Route System

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Pennsylvania State Route System
Interstate 80 markerU.S. Route 19 markerPA Route 18 marker70px
Route markers for Interstate 80, U.S. Route 19, Pennsylvania Route 18, and State Route 3069
System information
Notes: Numbers are assigned through Location Referencing System; all routes are assigned quadrant numbers, State Route X (SR X), which usually corresponded to the signed numbers of traffic routes (PA X). State Routes are generally state-maintained.
Highway names
Interstates: Interstate X (I-X)
US Routes: U.S. Route X (US X)
State: Pennsylvania Route X (PA X)
Quadrant Routes: State Route X (SR X)
System links
  • Pennsylvania State Route System

In the U.S. state of Pennsylvania, state highways are maintained by the Pennsylvania Department of Transportation. Each is assigned a four-digit State Route (SR) number in the present Location Referencing System. Traffic Routes are signed as Interstate Highways, U.S. Routes and Pennsylvania Routes (PA Routes), and are prefixed with one to three zeros to give a four-digit number. PA Routes are also called Pennsylvania Traffic Routes, and formerly State Highway Routes.[1]


The Pennsylvania State Route System was established by the Sproul Road Bill passed in 1911. The system took control of over 4,000 miles of road. The system of roads continued to grow over the next few decades until continual addition of roads faced greater opposition. On October 1, 1940, the Pennsylvania Turnpike's first section of highway was opened to motorized traffic; the Turnpike operated under the Pennsylvania Turnpike Commission and was independent of the then-known Department of Highways.

In 1970, the Department of Highways and several other offices and departments were reorganized into the Pennsylvania Department of Transportation. In 1987, the Sproul system of Legislative Routes was reorganized into the current Pennsylvania State Route System under the Location Referencing System.

Location Referencing System

LRS number assignments[2]
Route number Name Description
0001-0999 Traffic Routes the first 0 is usually not existent on the markers
1001-4999 Quadrant Routes assigned by rough quadrant in the county, going clockwise from northeast (1) to northwest (4)
6001-6999 Relocated Traffic Routes (Including alternate lanes such as local lanes or HOV lanes), assigned a number equal to the old number plus 6000
7001-7999 Turned back, abandoned, or null routes 7076, 7276, 7376, 7576, 7476, and 7043 are used for sections of the Pennsylvania Turnpike[3]
8001-8999 Interchanges With one number per interchange
9101-9199 Wye connections
9201-9299 Rest areas
9301-9399 Truck escape ramps
9401-9499 Other roadways


The symbol used for the signage of state routes is an outline of the keystone after Pennsylvania's nickname. Four-digit State Routes are unsigned, except on small white reference markers at intersections, and are only unique within each county. Underneath, there is a larger typeface number identifying the segment of highway being entered. Segments are typically one half mile long and are usually numbered in multiples of 10 on non-Interstate highways. Segment numbers increase in the north or east direction, and are even-numbered on undivided highways and on the northbound or eastbound direction of divided highways.[4]

Circumstances with some routes

Bannered routes are not assigned State Route numbers corresponding to their signed numbers, but are instead marked along other routes, mostly Quadrant Routes.

Concurrencies are assigned a number equal to the smaller number of the concurrent routes, or the highest type (Quadrant Route → PA Route → U.S. Route → Interstate).[2]

Occasionally, a signed Traffic Route number does not match the State Route, usually in the case of an extension or relocation. (One example is Pennsylvania Route 3, which uses a one-way pair of Quadrant Routes in Center City Philadelphia.) A different number can also be used to avoid conflicts between different types — for instance, signed Pennsylvania Route 380 is actually State Route 400, renumbered ca. 1973 when Interstate 81E was renumbered Interstate 380. The majority of, but not all, signed Traffic Routes are state-maintained.[5]

Lists of routes in the Pennsylvania State Route System

I-blank.svg Interstate Highways: A list of interstate highways.
US blank.svg U.S. Routes: A list of U.S. highways.
PA-blank2di.svg 40px State Routes: A list of state routes.

See also


  1. Pennsylvania Department of Transportation, Historic Transportation Maps
  2. 2.0 2.1 Pennsylvania Department of Transportation - Location Referencing System PDF (2.05 MiB)
  3. "Penndot - Pennsylvania Stateroads 200901". Pennsylvania Department of Transportation. Retrieved 2010-01-19.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  4. Pennsylvania Department of Transportation, SR Segment Signing Guide (PUB 664)
  5. For instance, the Lawrence County map PDF (2.17 MiB, FTP) indicates that Pennsylvania Route 551 north of Pulaski, near the north edge of the county is — except for the bridge over Buchanan Creek — locally maintained as Township Route 649. This is confirmed by the VideoLog. A 1990 county map PDF (5.97 MiB, FTP) shows that it was once state-maintained all the way as Legislative Route 649.

External links