Petřín funicular
The Petřín funicular is a funicular railway in the Czech capital city of Prague. It links the Malá Strana district with the top of Petřín hill. The funicular has three stops: Újezd (at the bottom of the hill), Nebozízek (the middle station) and Petřín (at the top of the hill). According to Czech legend, the name of the middle station stems from an incident in which little son of Emperor Charles IV, requesting food, was unable to properly pronounce the Czech letter "ř" when he requested for a schnitzel, so instead of "nebo řízek" (meaning, "or schnitzel"), he expressed the word Nebozízek which actually means diminutively one of types of auger.
The line was originally opened in 1891,[1] with a length of 383 metres (1,257 ft), a track gauge of 1,000 mm (3 ft 3 3⁄8 in) metre gauge, and water balance propulsion. This original line closed with start of the First World War in 1914 and did not reopen after the end of hostilities.[1] The current longer line opened in 1932 with a different track gauge and completely new equipment, and operated throughout the Second World War. However a landslide in 1965 caused the service to be suspended, and it was not resumed until 1985.[1] At that time new cars were provided and the track reconstructed, but the original machinery retained.[2]
Although design and architecture of the stations are similar to Prague Metro, the funicular is actually operated by the trams division of the city transport company.
The funicular has the following technical parameters:[3]
- Length: 510 metres (1,673 ft)
- Height: 130 metres (427 ft)
- Maximum gradient: 29.5%
- Cars: 2
- Configuration: Single track with passing loop
- Track gauge: 1,435 mm (4 ft 8 1⁄2 in) standard gauge
- Capacity: 100 passengers per car
- Traction: Electricity
See also
References
- ↑ 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
External links
 |
Wikimedia Commons has media related to Lua error in package.lua at line 80: module 'strict' not found.. |
- Page on the Petřín funicular from DP Praha's official web site
- Article on the Petřín funicular from Funimag
Lua error in package.lua at line 80: module 'strict' not found.
<templatestyles src="Asbox/styles.css"></templatestyles>
 |
This European rail transport related article is a stub. You can help Wikipedia by expanding it. |
<templatestyles src="Asbox/styles.css"></templatestyles>
 |
This article about transport in the Czech Republic is a stub. You can help Wikipedia by expanding it. |
- Pages with broken file links
- Articles that mention track gauge 1000 mm
- Articles that mention track gauge 1435 mm
- Funicular railways in the Czech Republic
- Transport in Prague
- Former water-powered funicular railways converted to electricity
- Metre gauge railways in the Czech Republic
- Europe rail transport stubs
- Czech Republic transport stubs
