Phenylalanine hydroxylase

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Infobox/styles.css"></templatestyles>

Phenylalanine hydroxylase
Phenylalanine hydroxylase.jpg
predicted 3D structure of phenylalanine hydroxylase
Available structures
PDB Ortholog search: PDBe, RCSB
Identifiers
Symbols PAH ; PH; PKU; PKU1
External IDs OMIM612349 MGI97473 HomoloGene234 ChEMBL: 3076 GeneCards: PAH Gene
EC number 1.14.16.1
RNA expression pattern
PBB GE PAH 205719 s at tn.png
PBB GE PAH 217583 at tn.png
More reference expression data
Orthologs
Species Human Mouse
Entrez 5053 18478
Ensembl ENSG00000171759 ENSMUSG00000020051
UniProt P00439 P16331
RefSeq (mRNA) NM_000277 NM_008777
RefSeq (protein) NP_000268 NP_032803
Location (UCSC) Chr 12:
102.84 – 102.96 Mb
Chr 10:
87.52 – 87.58 Mb
PubMed search [1] [2]

Phenylalanine hydroxylase (PheOH, alternatively PheH or PAH) (EC 1.14.16.1) is an enzyme that catalyzes the hydroxylation of the aromatic side-chain of phenylalanine to generate tyrosine. PheOH is one of three members of the biopterin-dependent aromatic amino acid hydroxylases, a class of monooxygenase that uses tetrahydrobiopterin (BH4, a pteridine cofactor) and a non-heme iron for catalysis. During the reaction, molecular oxygen is heterolytically cleaved with sequential incorporation of one oxygen atom into BH4 and phenylalanine substrate.[1]

Reaction catalyzed by PheOH.
Reaction catalyzed by PheOH

Phenylalanine hydroxylase is the rate-limiting enzyme of the metabolic pathway that degrades excess phenylalanine. Research on phenylalanine hydroxylase by Seymour Kaufman led to the discovery of tetrahydrobiopterin as a biological cofactor.[2] The enzyme is also interesting from a human health perspective because mutations in PAH, the encoding gene, can lead to phenylketonuria, a severe metabolic disorder.

Enzyme mechanism

The reaction is thought to proceed through the following steps:

  1. formation of a Fe(II)-O-O-BH4 bridge.
  2. heterolytic cleavage of the O-O bond to yield the ferryl oxo hydroxylating intermediate Fe(IV)=O
  3. attack on Fe(IV)=O to hydroxylate phenylalanine substrate to tyrosine.[3]
Formation and cleavage of a Fe(II)-O-O-BH4 bridge..
PheOH mechanism, part I

Formation and cleavage of the iron-peroxypterin bridge. Although evidence strongly supports Fe(IV)=O as the hydroxylating intermediate,[4] the mechanistic details underlying the formation of the Fe(II)-O-O-BH4 bridge prior to heterolytic cleavage remain controversial. Two pathways have been proposed based on models that differ in the proximity of the iron to the pterin cofactor and the number of water molecules assumed to be iron-coordinated during catalysis. According to one model, an iron dioxygen complex is initially formed and stabilized as a resonance hybrid of Fe2+O2 and Fe3+O2. The activated O2 then attacks BH4, forming a transition state characterized by charge separation between the electron-deficient pterin ring and the electron-rich dioxygen species.[5] The Fe(II)-O-O-BH4 bridge is subsequently formed. On the other hand, formation of this bridge has been modeled assuming that BH4 is located in iron's first coordination shell and that the iron is not coordinated to any water molecules. This model predicts a different mechanism involving a pterin radical and superoxide as critical intermediates.[6] Once formed, the Fe(II)-O-O-BH4 bridge is broken through heterolytic cleavage of the O-O bond to Fe(IV)=O and 4a-hydroxytetrahydrobiopterin; thus, molecular oxygen is the source of both oxygen atoms used to hydroxylate the pterin ring and phenylalanine.

Hydroxylation of phenylalanine to tyrosine.
PheOH mechanism, part II

Hydroxylation of phenylalanine by ferryl oxo intermediate. Because the mechanism involves a Fe(IV)=O (as opposed to a peroxypterin) hydroxylating intermediate, oxidation of the BH4 cofactor and hydroxylation of phenylalanine can be decoupled, resulting in unproductive consumption of BH4 and formation of H2O2.[3] When productive, though, the Fe(IV)=O intermediate is added to phenylalanine in an electrophilic aromatic substitution reaction that reduces iron from the ferryl to the ferrous state.[3] Although initially an arene oxide or radical intermediate was proposed, analyses of the related tryptophan and tyrosine hydroxylases have suggested that the reaction instead proceeds through a cationic intermediate that requires Fe(IV)=O to be coordinated to a water ligand rather than a hydroxo group.[3][7] This cationic intermediate subsequently undergoes a 1,2-hydride NIH shift, yielding a dienone intermediate that then tautomerizes to form the tyrosine product.[8] The pterin cofactor is regenerated by hydration of the carbinolamine product of PheOH to quinonoid dihydrobiopterin (qBH2), which is then reduced to BH4.[9]

Enzyme regulation

PAH is proposed to use the morpheein model of allosteric regulation.[10][11]

Mammalian PAH exists in an equilibrium consisting of tetramers of two distinct architectures, with one or more dimeric forms as part of the equilibrium. This behavior is consistent with a dissociative allosteric mechanism.[11]

Many studies suggest that mammalian PAH shows behavior comparable to porphobilinogen synthase (PBGS), wherein a variety of factors such as pH and ligand binding are reported to affect enzyme activity and protein stability.[11]

Structure

The PheOH monomer (51.9 kDa) consists of three distinct domains: a regulatory N-terminal domain (residues 1-117), the catalytic domain (residues 118-427), and a C-terminal domain (residues 428-453) responsible for oligomerization of identical monomers. Extensive crystallographic analysis has been performed, especially on the pterin- and iron-coordinated catalytic domain to examine the active site. The structure of the N-terminal regulatory domain has also been determined, and together with the solved structure of the homologous tyrosine hydroxylase C-terminal tetramerization domain, a structural model of tetrameric PheOH has been proposed.[9]

Active site model for PheOH.
Model of the active site of PheOH bound to BH4, ferrous, and a phenylalanine analogue. (from PDB 1KW0) Phenylalanine analogue, BH4, iron, Fe(II)-coordinated His and Glu residues

Catalytic domain

Solved crystal structures of the catalytic domain indicate that the active site consists of an open and spacious pocket lined primarily by hydrophobic residues, though three glutamic acid residues, two histidines, and a tyrosine are also present and critical for pterin- and iron-binding.[9] Contradictory evidence exists about the coordination state of the ferrous atom and its proximity to BH4 within the active site. According to crystallographic analysis, Fe(II) is coordinated by water, His285, His290, and Glu330 (a 2-his-1-carboxylate facial triad arrangement) with octahedral geometry.[12] Inclusion of a Phe analogue in the crystal structure changes both iron from a six- to a five-coordinated state involving a single water molecule and bidentate coordination to Glu330 and opening a site for oxygen to bind. BH4 is concommitantly shifted toward the iron atom, although the pterin cofactor remains in the second coordination sphere.[13] On the other hand, a competing model based on NMR and molecular modeling analyses suggests that all coordinated water molecules are forced out of the active site during the catalytic cycle while BH4 becomes directly coordinated to iron.[14] As discussed above, resolving this discrepancy will be important for determining the exact mechanism of PheOH catalysis.

N-terminal regulatory domain

The regulatory nature of the N-terminal domain (residues 1-117) is conferred by its structural flexibility.[15] Hydrogen/deuterium exchanges analysis indicates that allosteric binding of Phe globally alters the conformation of PheOH such that the active site is less occluded as the interface between the regulatory and catalytic domains is increasingly exposed to solvent.[15][16][17] This observation is consistent with kinetic studies, which show an initially low rate of tyrosine formation for full-length PheOH. This lag time is not observed, however, for a truncated PheOH lacking the N-terminal domain or if the full-length enzyme is pre-incubated with Phe. Deletion of the N-terminal domain also eliminates the lag time while increasing the affinity for Phe by nearly two-fold; no difference is observed in the Vmax or Km for the tetrahydrobiopterin cofactor.[18] Additional regulation is provided by Ser16; phosphorylation of this residue does not alter enzyme conformation but does reduce the concentration of Phe required for allosteric activation.[17] This N-terminal regulatory domain is not observed in bacterial PheOHs but shows considerable structural homology to the regulatory domain of phosphogylcerate dehydrogenase, an enzyme in the serine biosynthetic pathway.[17]

Tetramerization domain

Prokaryotic PheOH is monomeric, whereas eukaryotic PheOH exists in an equilibrium between homotetrameric and homodimeric forms.[3][9] The dimerization interface is composed of symmetry-related loops that link identical monomers, while the overlapping C-terminal tetramerization domain mediates the association of conformationally distinct dimers that are characterized by a different relative orientation of the catalytic and tetramerization domains (Flatmark, Erlandsen). The resulting distortion of the tetramer symmetry is evident in the differential surface area of the dimerization interfaces and distinguishes PheOH from the tetramerically symmetrical tyrosine hydroxylase.[9] A domain-swapping mechanism has been proposed to mediate formation of the tetramer from dimers, in which C-terminal alpha-helixes mutually alter their conformation around a flexible C-terminal five-residue hinge region to form a coiled-coil structure, shifting equilibrium toward the tetrameric form.[3][9][19] Although both the homodimeric and homotetrameric forms of PheOH are catalytically active, the two exhibit differential kinetics and regulation. In addition to reduced catalytic efficiency, the dimer does not display positive cooperativity toward L-Phe (which at high concentrations activates the enzyme), suggesting that L-Phe allosterically regulates PheOH by influencing dimer-dimer interaction.[19]

Biological function

PheOH is a critical enzyme in phenylalanine metabolism and catalyzes the rate-limiting step in its complete catabolism to carbon dioxide and water.[9][20] Regulation of flux through phenylalanine-associated pathways is critical in mammalian metabolism, as evidenced by the toxicity of high plasma levels of this amino acid observed in phenylketonuria (see below.) The principal source of phenylalanine is ingested proteins but relatively little of this pool is used for protein synthesis.[20] Instead, the majority of ingested phenylalanine is catabolized through PheOH to form tyrosine; addition of the hydroxyl group allows for the benzene ring to be broken in subsequent catabolic steps. Transamination to phenylpyruvate, whose metabolites are excreted in the urine, represents another pathway of phenylalanine turnover, but catabolism through PheOH predominates.[20]

In humans, this enzyme is expressed both in the liver and the kidney, and there is some indication that it may be differentially regulated in these tissues.[21] PheOH is unusual among the aromatic amino acid hydroxylases for its involvement in catabolism; tyrosine and tryptophan hydroxylases, on the other hand, are primarily expressed in the central nervous system and catalyze rate-limiting steps in neurotransmitter/hormone biosynthesis.[9]

Disease relevance

Deficiency in PheOH activity due to mutations in the PAH gene causes hyperphenylalaninemia (HPA), and when blood phenylalanine levels increase above 20 times the normal concentration, the metabolic disease phenylketonuria (PKU) results.[20] PKU is both genotypically and phenotypically heterogeneous: Over 300 distinct pathological mutants have been identified, the majority of which correspond to missense mutations that map to the catalytic domain.[9][12] When a cohort of identified PheOH mutants were expressed in recombinant systems, the enzymes displayed altered kinetic behavior and/or reduced stability, consistent with structural mapping of these mutations to both the catalytic and tetramerization domains of the enzyme.[9] Interestingly, BH44 has been administered as a pharmacological treatment and has been shown to reduce blood levels of phenylalanine for a segment of PKU patients whose genotypes lead to some residual PAH activity but have no defect in BH44 synthesis or regeneration. Follow-up studies suggest that in the case of certain PheOH mutants, excess BH44 acts as a pharmacological chaperone to stabilize mutant enzymes with disrupted tetramer assembly and increased sensitivity to proteolytic cleavage and aggregation.[22] Mutations that have been identified in the PAH locus are documented at the Phenylalanine Hydroxylase Locus Knowledgbase (PAHdb, http://www.pahdb.mcgill.ca/).

Since phenylketonurea can cause irreversible damage, it is imperative that deficiencies in the Phenylalanine Hydroxylase are determined early on in development. One method is a post-parturition screening test known as the Guthrie Test. The common method is via drawing blood from a small needle prick at the heel of the newborn and testing it for phenylketonurea, indicative of a PH deficiency. Placing the individual on a low phenylalanine, high tyrosine diet can help prevent any long-term damage to their development.

Related enzymes

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Phenylalanine hydroxylase is closely related to two other enzymes:

The three enzymes are homologous, that is, are thought to have evolved from the same ancient hydroxylase.

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 3.2 3.3 3.4 3.5 Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. 11.0 11.1 11.2 Lua error in package.lua at line 80: module 'strict' not found.
  12. 12.0 12.1 Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. 15.0 15.1 Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. 17.0 17.1 17.2 Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. 19.0 19.1 Lua error in package.lua at line 80: module 'strict' not found.
  20. 20.0 20.1 20.2 20.3 Lua error in package.lua at line 80: module 'strict' not found.
  21. Lua error in package.lua at line 80: module 'strict' not found.
  22. Lua error in package.lua at line 80: module 'strict' not found.

Further reading

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

External links