Pioneer 5

Pioneer 5

File:Pioneer-5.jpg Pioneer 5 mounted to its Thor Able launcher.
Mission type	Interplanetary space research
Operator	NASA
Harvard designation	1960 Alpha 1
SATCAT №	27
Spacecraft properties
Manufacturer	TRW
Launch mass	43 kilograms (95 lb)
Start of mission
Launch date	March 11, 1960, 13:00:07 (1960-03-11UTC13:00:07Z) UTC
Rocket	Thor DM-18 Able IV
Launch site	Cape Canaveral LC-17A
End of mission
Last contact	April 30, 1960 (1960-05-01)
Orbital parameters
Reference system	Heliocentric
Eccentricity	0.1689
Perihelion	0.7061 astronomical units (105,630,000 km; 65,640,000 mi)
Apohelion	0.9931 astronomical units (148,570,000 km; 92,310,000 mi)
Inclination	3.35 degrees
Period	311.6 days

Pioneer 5 (also known as Pioneer P-2, and Thor Able 4) was a spin-stabilized space probe in the NASA Pioneer program used to investigate interplanetary space between the orbits of Earth and Venus. It was launched on March 11, 1960 from Cape Canaveral Air Force Station Launch Complex 17A at 13:00:00 UTC with an on-orbit dry mass of 43 kg. It is a 0.66 m diameter sphere with 1.4 m span across its four solar panels and achieved a solar orbit of 0.806 × 0.995 AU (121,000,000 by 149,000,000 km).

Data was received until April 30, 1960. Among other accomplishments, the probe confirmed the existence of interplanetary magnetic fields. Pioneer 5 was the most successful probe in the Pioneer/Able missions.

Design and instruments

The spacecraft was a 0.66 m diameter sphere with four solar panels that spanned over 1.4 m. It was equipped with four scientific instruments:

1. A triple coincidence omnidirectional proportional counter telescope to detect solar particles and observe terrestrial trapped radiation. It could detect photons with E > 75 MeV and electrons with E > 13 MeV.
2. A rotating search coil magnetometer to measure the magnetic field in the distant field of the Earth, near the geomagnetic boundary, and in interplanetary space. It was capable of measuring fields from 1 microgauss to 12 milligauss. It consisted of a single search coil that was mounted on the spacecraft in such a way that is measured the magnetic field perpendicular to the spin axis of the spacecraft. It could output its measurements in both an analog and a digital format.
3. A Neher-type integrating ionization chamber and an Anton 302 Geiger-Müller tube (which functioned as a cosmic ray detector) to measure cosmic radiation. It was mounted normal to the spin axis of the spacecraft.
4. A micrometeorite momentum spectrometer (or micrometeorite detector) that consisted of two diaphragm and microphone combinations. It was used to measure the amount of meteoritic dust particles and the momentum of these particles.

Mission

The spacecraft returned data collected by the magnetometer on the magnetic field and it measured that the median undisturbed interplanetary field was approximately 5 γ ± 0.5 γ in magnitude. The spacecraft also measured solar flare particles, and cosmic radiation in the interplanetary region. The micrometeorite counter failed to operate as the data system saturated and failed to operate properly.

File:Pioneer5 with test equipment.jpg

Pioneer 5 with test equipment.

The recorded digital data were transmitted at 1, 8, and 64 bit/s, depending on the distance of the spacecraft from Earth and the size of the receiving antenna. Weight limitations on the solar cells prevented continuous operation of the telemetry transmitters. About four operations of 25 min duration were scheduled per day with occasional increases during times of special interest. A total of 138.9 h of operation was completed, and over 3 megabits of data were received. The major portion of the data was received by the Lovell radio telescope at Jodrell Bank Observatory and the Hawaii Tracking Station because their antennas provided grid reception. Data was received until April 30, 1960, after which telemetry noise and weak signal strength made data reception impossible. The spacecraft's signal was detected by Jodrell Bank from a record distance of 36.2 million km (22.5 million miles) on June 26, 1960, although it was much too weak by then to acquire data.

Communications

In common with Explorer 6 used the earliest known digital telemetry system used on spacecraft, codenamed "Telebit"., which was a tenfold (or 10 dB) improvement in channel efficiency on previous generation "Microlock" analog systems in use since Explorer 1 and the biggest single improvement in signal encoding on western spacecraft. The spacecraft received the uplink carrier at 401.8 MHz and converted it to a 378.2 MHz signal using a 16/17 coherent oscillator circuit. The telemetry system phase modulated a 512 Hz subcarrier, which was in turn amplitude modulated at 64, 8, or 1bit/s. The spacecraft was unable to aim its antennas, and so had no high-gain dish antenna common on later spacecraft. Instead, the system could introduce a 150W amplifier into its normally 5W transmitter circuit. It was powered by a battery of 28 F-size NiCd cells recharged by the solar paddles, allowing up to 8 minutes of high power communications before risking damage to the batteries. Each hour of 5W communications or 5 minutes of 150W communications required ten hours of recharging the batteries. Unlike later interplanetary spacecraft (Mariner 2 and beyond), this spacecraft did not use the Deep Space Network, which was not yet available, but a somewhat ad hoc Space Network called SPAN consisting of the 76m Lovell Telescope (then called Manchester Mark I), a 26-meter radio telescope in Hawaii, and a small helical array in Singapore.

See also

• Pioneer program
• Timeline of artificial satellites and space probes

External links

• Pioneer 5 Profile by NASA's Solar System Exploration
• Space Technology Laboratories Documents Archive