Pioneer Venus Orbiter

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Lua error in package.lua at line 80: module 'strict' not found.

Pioneer Venus Orbiter
Pioneer Venus orbiter.jpg
Pioneer Venus Orbiter
Mission type Venus orbiter
Operator NASA Ames
COSPAR ID 1978-051A
SATCAT № 10911
Website Pioneer Venus at NASA
Mission duration 14 years, 4 months, 18 days (from launch)
13 years, 10 months, 4 days (at Venus)
Spacecraft properties
Bus HS-507
Manufacturer Hughes
Launch mass 517 kilograms (1,140 lb)
Power 312 watts
Start of mission
Launch date May 20, 1978, 13:13:00 (1978-05-20UTC13:13Z) UTC
Rocket Atlas SLV-3D Centaur-D1AR
Launch site Cape Canaveral LC-36A
End of mission
Last contact October 8, 1992, 19:22 (1992-10-08UTC19:23Z) UTC
Decay date October 22, 1992[1]
Orbital parameters
Reference system Cytherocentric
Eccentricity 0.842
Pericytherion 181.6 kilometers (112.8 mi)
Apocytherion 66,630 kilometers (41,400 mi)
Inclination 105 degrees
Period 24 hours
Venus orbiter
Orbital insertion December 4, 1978

The Pioneer Venus Orbiter, also known as Pioneer Venus 1 or Pioneer 12, was a mission to Venus conducted as part of the Pioneer program. Launched in May 1978 atop an Atlas-Centaur rocket, the spacecraft was inserted into an elliptical orbit around Venus on December 4, 1978. It returned data on Venus until October 1992.[1][2]

Launch and arrival at Venus

File:Pioneer Venus 1 orbit attitude.gif
Orbit attitude of Pioneer Venus 1 between 1978 - 1980 and 1992

The Pioneer Venus Orbiter was launched by an Atlas SLV-3D Centaur-D1AR rocket, which flew from Launch Complex 36A at the Cape Canaveral Air Force Station. The launch occurred at 13:13:00 on May 20, 1978, and deployed the Orbiter into heliocentric orbit for its coast to Venus. Venus orbit insertion occurred on December 4, 1978.

Spacecraft

File:Pioneer Venus 1 at KSC.jpg
Pioneer Venus 1 at KSC

Manufactured by Hughes Aircraft Company, the Pioneer Venus Orbiter was based on the HS-507 bus.[3] The spacecraft was a flat cylinder, 2.5 meters (8.2 ft) in diameter and 1.2 meters (3.9 ft) long. All instruments and spacecraft subsystems were mounted on the forward end of the cylinder, except the magnetometer, which was at the end of a 4.7 meters (15 ft) boom. A solar array extended around the circumference of the cylinder. A 1.09 metres (3 ft 7 in) despun dish antenna provided S and X band communication with Earth. A Star-24 solid rocket motor was integrated into the spacecraft to provide the thrust to enter orbit around Venus.[3]

From Venus orbit insertion to July 1980, periapsis was held between 142 and 253 kilometres (88 and 157 mi) (at 17 degrees north latitude) to facilitate radar and ionospheric measurements. The spacecraft was in a 24-hour orbit with an apoapsis of 66,900 kilometers (41,600 mi). Thereafter, the periapsis was allowed to rise to a maximum of 2,290 kilometres (1,420 mi) and then fall, to conserve fuel.

In 1991, the Radar Mapper was reactivated to investigate previously inaccessible southern portions of the planet, in conjunction with the recently arrived Magellan spacecraft. In May 1992, Pioneer Venus began the final phase of its mission, in which the periapsis was held between 150 and 250 kilometres (93 and 155 mi), until the spacecraft's propellant was exhausted, after which the orbit decayed naturally. The spacecraft continued to return data until 8 October 1992, with the last signals being received at 19:22 UTC.[2] The Pioneer Venus Orbiter disintegrated upon entering the atmosphere of Venus on October 22, 1992.[1]

Experiments

File:Venus map with labels.jpg
A map of Venus produced from Pioneer data

The Pioneer Venus Orbiter carried 17 experiments (with a total mass of 45 kg):

An image of Venus in ultraviolet light by the Pioneer Venus Orbiter
  • a cloud photo-polarimeter (OCPP) to measure the vertical distribution of the clouds, similar to Pioneer 10 and Pioneer 11 imaging photo-polarimeter (IPP)
  • a surface radar mapper (ORAD) to determine topography and surface characteristics. Observations could only be conducted when the probe was closer than 4700 km over the planet. A 20 Watt S-band signal (1.757 gigahertz) was sent to the surface that reflected it, with the probe analyzing the echo. Resolution at periapsis was 23 x 7 km.
  • an infrared radiometer (OIR) to measure IR emissions from Venus' atmosphere
  • an airglow ultraviolet spectrometer (OUVS) to measure scattered and emitted UV light
  • a neutral mass spectrometer (ONMS) to determine the composition of the upper atmosphere
  • a solar wind plasma analyzer (OPA) to measure properties of the solar wind
  • a magnetometer (OMAG) to characterize the magnetic field at Venus
  • an electric field detector (OEFD) to study the solar wind and its interactions
  • an electron temperature (OETP) to study the thermal properties of the ionosphere
  • an ion mass spectrometer (OIMS) to characterize the ionospheric ion population
  • a charged particle retarding potential analyzer (ORPA) to study ionospheric particles
  • two radio science experiments to determine the gravity field of Venus
  • a radio occultation experiment to characterize the atmosphere
  • an atmospheric drag experiment to study the upper atmosphere
  • a radio science atmospheric and solar wind turbulence experiment
  • a gamma ray burst (OGBD) detector to record gamma ray burst events

The spacecraft conducted radar altimetry observations allowing the first global topographic map of the Venusian surface to be constructed.

Observations of Halley's Comet

From its orbit of Venus, the Pioneer Venus Orbiter was able to observe Halley's Comet when it was unobservable from Earth due to its proximity to the sun during February 1986. UV spectrometer observations monitored the loss of water from the comet's nucleus at perihelion on February 9.[4]

See also

References

  1. 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.

External links