Dodge Ramcharger

Dodge Ramcharger
File:Dodge Ramcharger -- 07-20-2009.jpg
Overview
Manufacturer	Chrysler Corporation
Production	1974–2001
Body and chassis
Class	Full-size SUV
Body style	2-door SUV
Platform	Front engine, rear-wheel drive / four-wheel drive
Chronology
Successor	Dodge Durango (2004)

The Dodge Ramcharger is a large sport utility vehicle built by Dodge from 1974 to 1994 (and from at least 1986 until 2001 in Mexico) based on the shortened wheelbase of the Dodge D Series/Ram pickup truck chassis. A Plymouth version, named the Trailduster was offered from 1974 to 1981, the brand's only SUV.

First generation

First generation
Plymouth Trail Duster
Overview
Also called	Plymouth Trailduster (1974–1981)
Production	1974–1980
Body and chassis
Platform	Chrysler AD platform
Related	Dodge D Series Dodge Ram
Powertrain
Engine	225 cu in (3.7 L) I6 318 cu in (5.2 L) V8 360 cu in (5.9 L) V8 400 cu in (6.6 L) V8 440 cu in (7.2 L) V8
Transmission	4-speed manual 3-speed TorqueFlite automatic

During development, it was known as the "Rhino".

The Ramcharger and Trailduster were built using a nine-inch (228.6 mm) shortened pickup Chrysler AD platform that was introduced for 1972. First available in four-wheel drive with a rear-wheel drive only version available starting in 1975.

The 1974 through 1980 models came without a roof, with a dealer-installed fabric top, or an optional removable steel roof with a flip up rear tailgate window. The 1974 year model differs from the others in that its door pillars are attached to the removable roof. Marketed as a basic utility vehicle, only the driver's seat was standard equipment with the passenger seat optional up to 1976. Also available was an insulated center console for keeping items cool when filled with ice.

File:1974 Dodge Ramcharger topless SUV at 2015 Macungie show 2of2.jpg

1974 Ramcharger with optional passenger and rear bench seats

The Ramcharger was entered in rallying and placed first in the 1975 Sno*Drift event.

The vehicle was powered by a Chrysler LA engine, the most common being the 318 cu in (5.2 L) V8. Optional was the 360 cu in (5.9 L) V8, with big-block B series 400 cu in (6.6 L) V8 and RB 440 cu in (7.2 L) V8 were optional.

In 1978 and 1979 the 360 cu in (5.9 L) output was increased to 195 hp (145 kW; 198 PS). 1978 was the last year for the 400 cu in (6.6 L), which by then was rated at 215 hp (160 kW; 218 PS).

Second generation

Second generation
File:Dodge-Ramcharger.JPG
Overview
Production	1981–1994 (1988–1996 In Mexico)
Body and chassis
Platform	Chrysler AD platform
Related	Dodge Ram
Powertrain
Engine	318 cu in (5.2 L) V8 360 cu in (5.9 L) V8
Transmission	3-speed automatic 4-speed manual
Dimensions
Wheelbase	106.0 in (2,692 mm)
Length	1988–1990: 184.6 in (4,689 mm) 1991–94: 188.0 in (4,775 mm)
Width	79.5 in (2,019 mm)
Height	1988–1990 2WD: 69.7 in (1,770 mm) 1988–1990 4WD: 73.1 in (1,857 mm) 1991–94 4WD: 74.1 in (1,882 mm) 1991–94 2WD: 70.6 in (1,793 mm)

The Ramcharger and Trailduster followed the D-series pickup's 1981 redesign into the Ram and is considered the second generation. These models had a non-removable welded steel top instead of the removable top. The Trailduster was only available for one year with the Ram design and steel non-removable top, as it was dropped after 1981.

Initially a normally aspirated carburetor, in 1988 the 318 gained throttle-body fuel injection with the 360 following in 1989. Power output for the TBI 318 was 230 hp (172 kW; 233 PS) and 280 lb·ft (380 N·m) of torque. The TBI 360 had 240 hp (179 kW; 243 PS) and 283 to 295 lb·ft (400 N·m). In 1992 the multiport fuel injected Magnum 318 was the standard engine while the LA 360 with TBI was still offered. In 1994 the Magnum 360 replaced the LA engine version.

Many manual transmissions were offered throughout the years, starting with the A-230 three-speed and ending with the A-535 five-speed in 1992. The NP435 "granny gear" 4 speed was the most common in 4WD models, as well as the close ratio version, the NP445. In 1988 the clutch was converted from a mechanical linkage to a hydraulic system. Automatic transmission models had the Chrysler Loadflite TF-727A or B until, in 1991, it was replaced with the A-500/A-518 four-speed.

An All-Wheel-Drive NP-203 transfer case was standard until 1980, when it was replaced with the part-time NP-208. This was supplanted by the NP-241 in 1988.

Axles were Dana 44 front and 9¼" rear. AWD models (1973–1979) were equipped with the full time version of the Dana 44 that had no provision for locking hubs and had a front wheel bearing design with a somewhat dubious reputation. In 1980 when the part time 4WD system was introduced, the front Dana 44 was equipped with a more conventional front wheel bearing design and automatic locking hubs. Late in the 1984 model year the Dana 44 was switched to a CAD (Center Axle Disconnect) version. The CAD Dana 44 was vacuum actuated by a switch on the transfer case and powered by engine vacuum. The CAD Dana 44 was carried on until the end of Ramcharger production in 1994. The vacuum switch on the transfer case would occasionally fail and either leave the CAD engaged or not engage the CAD at all. Limited slip differentials were available for the 9¼" rear axle. The AWD versions used a 5 on 4½" wheel bolt circle and the part time models used a 5 on 5½" bolt circle.

Third generation

Third generation
File:Dodge Ram Charger 2005.jpg
Overview
Production	1995–2002
Assembly	Saltillo, Coahuila, Mexico
Body and chassis
Related	Dodge Ram
Powertrain
Engine	360 cu in (5.9 L) V8 318 cu in (5.2 L) V8
Transmission	4-speed automatic 4-speed manual
Dimensions
Wheelbase	113.7 in (2,888 mm)
Length	198 in (5,029 mm)
Curb weight	5,300 lb (2,404.0 kg)

The Ramcharger continued south of the U.S. border until 1996, with minor running changes from the last version sold in the U.S. (1994).

Bowing to local-market demands, a new Ramcharger was produced in Mexico for the 1999 model year based on the second generation Ram pickup and using parts from the Dodge Ram pickup and other Chrysler vehicles. It was now sold only in Mexico and South American nations where the previous generation Ramcharger had been quite successful. There were ST, SLT, SLT Plus and Sport trim levels. Powered by the 5.9 and 5.2 Liter (360 CID and 318 CID) Magnum V8 and offered only in 2WD versions, it was discontinued in model year 2002. One of the more interesting features of this generation was a small 3rd row folding seat in the cargo area that faced sideways, making it less-practical for long trips. The rear hatch door was shared with the 1996–2000 model Chrysler Minivans. Likely reasons this version of the Ramcharger was not sold in the U.S. were numerous. Two-door SUV sales had been declining, to which GM soon ended production of its 2-door Tahoe and Yukon, and Ford replaced the long-running 2-door only Ford Bronco around the same time with the 4-door only Ford Expedition. DaimlerChrysler had just launched two successful mid-sized SUVs (Jeep Grand Cherokee and Dodge Durango), which would have been showroom-competitors with a 3rd generation Ramcharger. Finally, this large SUV would have negatively affected the company's Corporate Average Fuel Economy (Corporate Average Fuel Economy) for a very small projected sales return.

See also

• List of Dodge automobiles

External links

Media related to at Wikimedia Commons