Polyhydroxybutyrate

From Infogalactic: the planetary knowledge core
(Redirected from Poly-3-hydroxybutyrate)
Jump to: navigation, search

Polyhydroxybutyrate (PHB) is a polyhydroxyalkanoate (PHA), a polymer belonging to the polyesters class that are of interest as bio-derived and biodegradable plastics.[1] The poly-3-hydroxybutyrate (P3HB) form of PHB is probably the most common type of polyhydroxyalkanoate, but other polymers of this class are produced by a variety of organisms: these include poly-4-hydroxybutyrate (P4HB), polyhydroxyvalerate (PHV), polyhydroxyhexanoate (PHH), polyhydroxyoctanoate (PHO) and their copolymers.

Biosynthesis

PHB is produced by microorganisms (such as Ralstonia eutrophus, Methylobacterium rhodesianum or Bacillus megaterium) apparently in response to conditions of physiological stress;[2] mainly conditions in which nutrients are limited. The polymer is primarily a product of carbon assimilation (from glucose or starch) and is employed by microorganisms as a form of energy storage molecule to be metabolized when other common energy sources are not available.

Microbial biosynthesis of PHB starts with the condensation of two molecules of acetyl-CoA to give acetoacetyl-CoA which is subsequently reduced to hydroxybutyryl-CoA. This latter compound is then used as a monomer to polymerize PHB.[3] PHAs granules are then recovered by disrupting the cells.[4]

Structure of poly-(R)-3-hydroxybutyrate (P3HB), a polyhydroxyalkanoate
Chemical structures of P3HB, PHV and their copolymer PHBV

Thermoplastic polymer

Most commercial plastics are synthetic polymers derived from petrochemicals. They tend to resist biodegradation. PHB-derived plastics are attractive because they are compostable and derived from renewables and are bio-degradable.

ICI had developed the material to pilot plant stage in the 1980s, but interest faded when it became clear that the cost of material was too high, and its properties could not match those of polypropylene.

In 1996 Monsanto (who sold PHB as a copolymer with PHV under the trade name Biopol) bought all patents for making the polymer from ICI/Zeneca. However, Monsanto's rights to Biopol were sold to the American company Metabolix in 2001[5] and Monsanto's fermenters producing PHB from bacteria were closed down at the start of 2004. Monsanto began to focus on producing PHB from plants instead of bacteria.[6] But now with so much media attention on GM crops, there has been little news of Monsanto's plans for PHB.[7]

In June 2005, a US company, Metabolix, received the Presidential Green Chemistry Challenge Award (small business category) for their development and commercialisation of a cost-effective method for manufacturing PHAs in general, including PHB.

Biopol is currently used in the medical industry for internal suture. It is nontoxic and biodegradable, so it does not have to be removed after recovery.[citation needed]

Properties of PHB

Citation needed

  • Water-insoluble and relatively resistant to hydrolytic degradation. This differentiates PHB from most other currently available biodegradable plastics, which are either water-soluble or moisture-sensitive.
  • Good oxygen permeability.
  • Good ultra-violet resistance but poor resistance to acids and bases.
  • Soluble in chloroform and other chlorinated hydrocarbons.[8]
  • Biocompatible and hence is suitable for medical applications.
  • Melting point 175 °C., and glass transition temperature 2 °C.
  • Tensile strength 40 MPa, close to that of polypropylene.
  • Sinks in water (while polypropylene floats), facilitating its anaerobic biodegradation in sediments.
  • Nontoxic.
  • Less 'sticky' when melted, making it a potentially good material for clothing in the future

History

Polyhydroxybutyrate was first isolated and characterized in 1925 by French microbiologist Maurice Lemoigne.[9]

Biodegradation

Firmicutes and proteobacteria can degrade PHB. Bacillus, Pseudomonas and Streptomyces species can degrade PHB. Pseudomonas lemoigne, Comamonas sp. Acidovorax faecalis, Aspergillus fumigatus and Variovorax paradoxus are soil microbes capable of degradation. Alcaligenes faecalis, Pseudomonas, and Illyobacter delafieldi, are obtained from anaerobic sludge. Comamonas testosterone and Pseudomonas stutzeri were obtained from sea water. Few of these are capable of degrading at higher temperatures; notably excepting thermophilic Streptomyces sp. and a thermophilic strain of Aspergillus sp [10]

References

  1. ↑ Frieder W. Lichtenthaler "Carbohydrates as Organic Raw Materials" in Ullmann's Encyclopedia of Industrial Chemistry 2010, Wiley-VCH, Weinheim. doi: 10.1002/14356007.n05_n07
  2. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lemoigne, M. (1926) Produits de dehydration et de polymerisation de l’acide ß-oxobutyrique. Bull. Soc. Chim. Biol. 8, 770–782.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Polyhydroxybutyrate&oldid=2745699"