Stellar population

From Infogalactic: the planetary knowledge core
(Redirected from Population II)
Jump to: navigation, search

In 1944, Walter Baade categorized groups of stars within the Milky Way from their spectra. Two main divisions were defined as Population  I and II, with another division known as Population III added in 1978. Later these differences were shown to be significant, dividing them by their chemical composition or metallicity, the proportion of stellar matter made up of the "heavier chemical elements", beyond hydrogen and helium.[1][2] By coincidence, each Population group definition has decreasing metal content and increasing age. Hence, the first stars in the universe (low metal content) were deemed Population III, and recent stars (high metallicity) are Population I.

Stellar populations

Observation of the spectra of stars has revealed that the metallicity of older stars have fewer heavy elements compared to the Sun. This immediately suggests that metallicity has evolved through the generations of stars by the process of stellar evolution. In current cosmological models, the matter created in the Big Bang was mostly hydrogen and helium, with only a very tiny fraction of light elements like lithium and beryllium. After this, when the universe cooled sufficiently, the first stars were born as extremely metal-poor Population III stars. Without metals, it is postulated that their stellar masses were hundreds of times that of the Sun. In turn, these massive stars evolved very quickly, and their nucleosynthetic processes quickly created the first 26 elements (up to iron in the periodic table).[3][citation needed]

Current theoretical stellar models show that most high-mass Population III stars quickly exhausted their fuel and exploded in extremely energetic pair-instability supernovae. Those explosions would have thoroughly dispersed their material, ejecting metals into the interstellar medium (ISM), to be incorporated into the later generations of stars. Their destruction suggests that no galactic high-mass Population III stars should be observable. However, some Population III stars might be seen in high-redshift galaxies whose light originated during the earlier history of the universe.[citation needed] None have been discovered. Stars too massive to produce pair-instability supernovae would have collapsed into black holes through a process known as photodisintegration, but some matter may have escaped during this process in the form of relativistic jets, and this could have "sprayed" the first metals into the universe.[4][5]

A rendering of Mu Arae, a metal-rich population I star.

It has been proposed that recent supernovae SN 2006gy and SN 2007bi may have been pair-instability supernovae in which such super-massive Population III stars exploded. It has been speculated that these stars could have formed relatively recently in dwarf galaxies containing primordial metal-free interstellar matter; past supernovae in these galaxies could have ejected their metal-rich contents at speeds high enough for them to escape the galaxy, keeping the metal content of the galaxy very low.[6]

The oldest observed stars, known as Population II, have very low metallicities;[7][8] as subsequent generations of stars were born they became more metal-enriched, as the gaseous clouds from which they formed received the metal-rich dust manufactured by previous generations. As those stars died, they returned metal-enriched material to the interstellar medium via planetary nebulae and supernovae, enriching further the nebulae out of which the newer stars formed. These youngest stars, including the Sun, therefore have the highest metal content, and are known as Population I stars.

Population I stars

Population I, or metal-rich stars, are young stars with the highest metallicity out of all three populations. The Earth's Sun is an example of a metal-rich star. These are common in the spiral arms of the Milky Way galaxy.

Generally, the youngest stars, the extreme Population I, are found farther toward the center of a galaxy, and intermediate Population I stars are farther out. The Sun is considered an intermediate Population I star. Population I stars have regular elliptical orbits of the galactic centre, with a low relative velocity. It was hypothesised that the high metallicity of Population I stars makes them more likely to possess planetary systems than the other two populations, because planets, particularly terrestrial planets, are thought to be formed by the accretion of metals.[9] However, observations of the Kepler data-set have found smaller planets around stars with a range of metallicities, while only larger, potential gas giant planets are concentrated around stars with relatively higher metallicity - a finding that has implications for theories of gas giant formation.[10]

Between the intermediate Population I and the Population II stars comes the intermediary disc population.

Population II stars

Population II, or metal-poor stars, are those with relatively little metal. The idea of a relatively small amount must be kept in perspective as even metal-rich astronomical objects contain low percentages of any element other than hydrogen or helium; metals constitute only a tiny percentage of the overall chemical makeup of the universe, even 13.8 billion years after the Big Bang. However, metal-poor objects are even more primitive. These objects formed during an earlier time of the universe. Intermediate Population I stars are common in the bulge near the centre of our galaxy, whereas Population II stars found in the galactic halo are older and thus more metal-poor. Globular clusters also contain high numbers of Population II stars.[11] It is believed that Population II stars created all the other elements in the periodic table, except the more unstable ones. An interesting characteristic of Population II stars is that despite their lower overall metallicity, they often have a higher ratio of alpha elements (O, Si, Ne, etc.) relative to Fe as compared to Population I stars; current theory suggests this is the result of Type II supernovae being more important contributors to the interstellar medium at the time of their formation, whereas Type Ia supernovae metal enrichment came later in the universe's evolution.[12]

Scientists have targeted these oldest stars in several different surveys, including the HK objective-prism survey of Timothy C. Beers et al. and the Hamburg-ESO survey of Norbert Christlieb et al., originally started for faint quasars. Thus far, they have uncovered and studied in detail about ten very metal-poor stars (such as Sneden's Star, Cayrel's Star, BD +17° 3248) and three of the oldest stars known to date: HE0107-5240, HE1327-2326 and HE 1523-0901. Caffau's star was identified as the most metal-poor star yet when it was found in 2012 using Sloan Digital Sky Survey data. However, in February 2014 the discovery of an even lower metallicity star was announced, SMSS J031300.36-670839.3 located with the aid of SkyMapper astronomical survey data. Less extreme in their metal deficiency, but nearer and brighter and hence longer known, are HD 122563 (a red giant) and HD 140283 (a subgiant).

Population III stars

Possible glow of Population III stars imaged by NASA's Spitzer Space Telescope.
Credit: NASA / JPL-Caltech / A. Kashlinsky (GSFC)

Population III, or extremely metal-poor stars (EMP),[13] are a hypothetical population of extremely massive and hot stars with virtually no metals, except possibly for intermixing ejecta from other nearby Pop III supernovae. Their existence is inferred from cosmology, but they have not yet been observed directly. Indirect evidence for their existence has been found in a gravitationally lensed galaxy in a very distant part of the universe.[14] They are also thought to be components of faint blue galaxies. Their existence is proposed to account for the fact that heavy elements, which could not have been created in the Big Bang, are observed in quasar emission spectra, as well as the existence of faint blue galaxies.[3] It is believed that these stars triggered a period of reionization. The recently discovered galaxy UDFy-38135539 is believed to have been a part of this process. Some theories hold that there were two generations of Population III stars.[15]

Artist's impression of the first stars, 400 million years after the Big Bang.

Current theory is divided on whether the first stars were very massive or not - theories proposed in 2009 and 2011 suggest the first star groups might have consisted of a massive star surrounded by several smaller stars.[16][17][18] One theory, which seems to be borne out by computer models of star formation, is that with no heavy elements and a much warmer interstellar medium from the Big Bang, it was easy to form stars with much greater total mass than the ones visible today.[citation needed] Typical masses for Population III stars would be expected to be about several hundred solar masses, which is much larger than that of current stars. Analysis of data on extremely low-metallicity Population II stars such as HE0107-5240, which are thought to contain the metals produced by Population III stars, suggest that these metal-free stars had masses of 20 to 130 solar masses instead.[19] On the other hand, analysis of globular clusters associated with elliptical galaxies suggests pair-instability supernovae, which are typically associated with very massive stars, were responsible for their metallic composition.[20] This also explains why there have been no low-mass stars with zero metallicity observed, although models have been constructed for smaller Population III stars.[21][22] Clusters containing zero-metallicity red dwarfs or brown dwarfs (possibly created by pair-instability supernovae[8]) have been proposed as dark matter candidates,[23][24] but searches for these and other MACHOs through gravitational microlensing have produced negative results.

Detection of Population III stars is a goal of NASA's James Webb Space Telescope.[25] New spectroscopic surveys, such as SEGUE or SDSS-II, may also locate Population III stars.[citation needed]

In June 2015, astronomers reported evidence for Population III stars in the Cosmos Redshift 7 galaxy at z = 6.60. Such stars are likely to have existed in the very early universe (i.e., at high redshift), and may have started the production of chemical elements heavier than hydrogen that are needed for the later formation of planets and life as we know it.[26][27]

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. 8.0 8.1 Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Buchhave, L.A. et al. (2012) An abundance of small exoplanets around stars with a wide range of metallicities. Nature 486:375–377
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Wolfe, Gawiser, Prochaska, "DAMPED Lyalpha SYSTEMS", Annu. Rev. Astron. Astrophys. 2005. 43: 861–918 http://ned.ipac.caltech.edu/level5/Sept05/Wolfe/Wolfe3.html
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. Lua error in package.lua at line 80: module 'strict' not found.
  20. Lua error in package.lua at line 80: module 'strict' not found.
  21. Lua error in package.lua at line 80: module 'strict' not found.
  22. http://arxiv.org/abs/1206.0187
  23. Lua error in package.lua at line 80: module 'strict' not found.
  24. Lua error in package.lua at line 80: module 'strict' not found.
  25. Lua error in package.lua at line 80: module 'strict' not found.
  26. Lua error in package.lua at line 80: module 'strict' not found.
  27. Lua error in package.lua at line 80: module 'strict' not found.