Public Service Building (Portland, Oregon)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Public Service Building
250px
Public Service Building (Portland, Oregon) is located in Portland, Oregon
Public Service Building (Portland, Oregon)
Location in Portland
General information
Type Commercial offices
Location 920 SW Sixth Avenue
Portland, Oregon
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Completed 1927
Height
Roof 67.06 m (220.0 ft)
Technical details
Floor count 15
Floor area 21,442 m2 (230,800 sq ft)
Design and construction
Architect A.E. Doyle & Associates
Public Service Building and Garage
Portland Historic Landmark[1]
Architectural style Italianate
NRHP Reference # 96000998
Added to NRHP September 12, 1996
References
[2][3][4]

The Public Service Building is a historic 67.06 m (220.0 ft), 15-story office building in downtown Portland, Oregon, United States. The building and its attached parking garage have been listed on the National Register of Historic Places as the Public Service Building and Garage since 1996.[4] It was built to house the offices of the Portland Gas and Coke Company and the Pacific Power and Light Company. The building's name reflects the fact that these utilities were "public services". A space in the Public Service Building fronting the corner of Salmon and Sixth streets became the first Niketown store.

Structural details

The north and south wings of the building were originally two stories tall, but were built up to their present height of 12 stories in 1957. Considered a skyscraper, once complete, the Public Service Building became the tallest building in Portland, holding that record until the 1960s. It was overtaken by the Hilton Portland Hotel in August 1962 when that building reached 229 feet (70 m).[5]

The main power plant for the city was once located in the basement. The space is now used to house the city's main power feeds.[6]

Architectural details

The Public Service Building was the third of three similarly Italianate buildings built in Portland by the firm of prolific local architect A.E. Doyle. The project's primary designer, Charles K. Greene, worked on the other Italianate Doyle-commissioned buildings in Portland: the smaller Bank of California Building (1924) and the Pacific Building (1926).[6] Green initiated the design of this structure, but left Portland before the building was complete. Pietro Belluschi then completed the project.[6]

The first three floors of the Public Service Building are faced with gray terra-cotta, and the upper floors in gray brick. The cornices and details are also terra-cotta. The building has a stylized wave motif that can be seen along its moldings. The original roof, like its sister buildings, was clad in red clay tile. Pietro Belluschi's touch can be seen in the building lobby, where he designed elevator doors that represented the utility company tenants.

Taking advantage of its being the tallest building in town, the utility companies added neon signs atop the roof: "POWER", "HEAT", "GAS", and "LIGHT", each aimed in a cardinal direction.[6] At some point all four sides of this sign said "PACIFIC POWER".

A.E. Doyle died in January 1928, only three weeks after the Public Service Building opened.[6]

Renovations

Renovations to the Public Service Building took place in 1957, 1973, and 1999. The 1957 renovation raised the height of the building's wings to 12 floors. In 1973, the neon signs and original roofs were removed, and a new metal roof installed. The 1999 renovations focused on reducing energy costs with new technology, costing around US$20 million.

The building was sold in 1993 to the Goodman Family, also owners of parking garages and lots in Portland, for US$3 million.[2]

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found..
  2. 2.0 2.1 Public Service Building (Portland, Oregon) at Emporis
  3. Public Service Building (Portland, Oregon) at SkyscraperPage
  4. 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. 6.0 6.1 6.2 6.3 6.4 Lua error in package.lua at line 80: module 'strict' not found.