RML 10 inch 18 ton gun

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Ordnance RML 10 inch 18 ton gun
300px
Mk I gun on broadside ironclad HMS Sultan in the 1890s
Type Naval gun
Coastal gun
Place of origin United Kingdom
Service history
In service 1868 - 19??
Used by Royal Navy
Australian Colonies
Wars Bombardment of Alexandria (1882)
Production history
Designer M Robert Fraser, Royal Gun Factory
Designed 1868
Manufacturer Royal Arsenal
Unit cost £1006[1]
Variants Mks I - II
Specifications
Barrel length 145.5 inches (3.70 m) (bore)[2]
Shell Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value). Palliser, Common, Shrapnel
Calibre Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value).
Muzzle velocity Palliser : 1,364 feet per second (416 m/s)
Common & shrapnel : 1,028 feet per second (313 m/s)[3]
Maximum firing range 6,000 yards (5,500 m)

The RML 10 inch guns Mk I - Mk II were large rifled muzzle-loading guns designed for British battleships and monitors in the 1860s to 1880s. They were also fitted to the Bouncer[4] and Ant-class flat-iron gunboats.

Design

File:RML 10 inch 18 ton gun diagrams.jpeg
Mk I & MK II gun barrels

The 10-inch gun was a standard "Woolwich" design (characterised by having a steel A tube with relatively few broad, rounded and shallow rifling grooves) developed in 1868, based on the successful Mk III 9-inch gun, itself based on the "Fraser" system. The Fraser system was an economy measure applied to the successful Armstrong design for heavy muzzle-loaders, which were expensive to produce. It retained the Armstrong steel barrel surrounded by wrought-iron coils under tension, but replaced the multiple thin wrought-iron coils shrunk around it by a single larger coil (10 inch Mark I) or 2 coils (Mark II); the trunnion ring was now welded to other coils; and it eliminated Armstrong's expensive forged breech-piece.[5]

The gun was rifled with 7 grooves, increasing from 1 turn in 100 calibres to 1 in 40.[2]

It was first used for the main armament on the central battery ironclad HMS Hercules, completed in late 1868.

A number of the Mk I guns on HMS Hercules and one of the two damaged guns in HMVS Cerberus suffered from cracked barrels.[6] Presumably this is why only a few (at least 25) Mk I guns were made.

Ammunition

When the gun was first introduced projectiles had several rows of "studs" which engaged with the gun's rifling to impart spin. Sometime after 1878, "attached gas-checks" were fitted to the bases of the studded shells, reducing wear on the guns and improving their range and accuracy. Subsequently "automatic gas-checks" were developed which could rotate shells, allowing the deployment of a new range of studless ammunition. Thus, any particular gun potentially operated with a mix of studded and studless ammunition.

The gun's primary projectile was "Palliser" shot or shell, an early armour-piercing projectile for attacking armoured warships. A large "battering charge" of 70 pounds "P" (pebble) or 60 pounds "R.L.G." (rifle large grain) gunpowder[7] was used for the Palliser projectile to achieve maximum velocity and hence penetrating capability.

Common (i.e. ordinary explosive) shells and shrapnel shells were fired with the standard "full service charge" of 44 pounds "P" or 40 pounds R.L.G. gunpowder,[7] as for these velocity was not as important.

  • RML 10 inch Palliser studless shell Mk II diagram.jpg
    Studless Palliser shell, 410 lb, 1886
  • Studless Common shell, 410 lb, 1886
  • RML 10 inch Shrapnel studless shell Mk I diagram.jpg
    Studless Shrapnel shell, 410 lb, 1886

See also

Surviving examples

File:RML 10 inch Mk II gun closeup Fort St Catherine.jpg
One of the guns on top of Fort St Catherine, Bermuda

One 10 inch Mk I Common Shell, one 10 inch Mk II Common Shell & one 10 inch Mk III Palliser Shot as part of the Victorian Navy display at the Geelong Maritime Museum, Australia. Details

Various other guns are mounted or unmounted in Bermuda, with some lying outside of Fort St Catherine, having been rolled out when made obsolete (the guns actually mounted on display there were taken from other forts, notably Fort Albert), and a number having been found buried in the moat of Fort Cunningham (the two mounted at Fort George are the RML 11 inch 25 ton gun). At least one has been erected on a display stand at Fort Hamilton, though the original mount is missing, and another at Alexandia Battery.

Notes and references

  1. ↑ Unit cost of £1005 10 shillings 2 pence is quoted in "The British Navy" Volume II, 1882, by Sir Thomas Brassey. Page 38
  2. ↑ 2.0 2.1 Treatise on Construction of Service Ordnance 1877, page 292
  3. ↑ 1,364 feet/second firing 400-pound projectile with "Battering charge" of 70 pound "P" (gunpowder). Treatise on Construction of Service Ordnance 1877, page 348. 1,028 feet/second firing 410-pound common shell with gas-check with 44 pounds "P" (gunpowder). Victorian Navy Handbook 1887, page 211.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Treatise on Construction of Service Ordnance 1877, page 92-93
  6. ↑ HMVS Cerberus website. reports of cracked guns
  7. ↑ 7.0 7.1 Treatise on Ammunition 1877, page 220

Bibliography

External links

Retrieved from "https://infogalactic.com/w/index.php?title=RML_10_inch_18_ton_gun&oldid=722194133"