Rail transport in Tasmania

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Za class locomotive hauling container train on the Bell Bay line in 1978.

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Rail transport in Tasmania consists of a network of narrow gauge track of 3 ft 6 in (1,067 mm) reaching virtually all cities and major towns in the island state of Tasmania, Australia. Today, rail services are focussed primarily on bulk freight, with no commercial passenger services being operated. The mainline railways of Tasmania are currently operated by TasRail, a Government of Tasmania-owned Corporation, who owns and maintains both rollingstock, locomotives, and track infrastructure.

Traffic

Tasmania has a small rail system by world standards. It currently carries no regular passenger services. Its freight services are not profitable without government subsidies. The main cargo carried is cement, which is carried from Railton to the port at Devonport. Other major commodities carried are coal, logs, containers and newsprint.

History

Routes

X class diesel electric locomotive as used in Tasmania, the first mainline diesel-electric locomotive purchased by an Australian government railway system.[1]
DP class class railmotor as used in Tasmania, as preserved on the Bellarine Peninsula Railway.
File:Ausv8.jpg
V class diesel shunting locomotive as used in Tasmania.

A broad gauge (5 ft 3 in [1,600 mm]) railway line was opened between Deloraine and Launceston on 10 February 1871[2] by the private Launceston and Western Railway, on the basis of debt guarantees from landowners who stood to benefit. The line went bankrupt in 1872 and was taken over by the Tasmanian Government on 31 October 1873,[2] which then attempted to recover the debt from the guarantors, leading to civil unrest.[3]

On 1 March 1876,[2] another private railway, the Tasmanian Main Line Company, which was guaranteed by the Tasmanian Government, opened a narrow gauge 3 ft 6 in (1,067 mm) line from Hobart to Evandale, near Launceston. A further extension, opened on 1 November 1876,[2] connected with the Launceston and Western Railway at a break-of-gauge at Western Junction with the line to Deloraine, however the line between Western Junction and Launceston was made dual gauge. The line between Western Junction and Deloraine was converted to dual gauge on 17 March 1885.[2] On 30 May 1885,[2] the line was extended to Devonport.

The Launceston - Deloraine was converted to solely narrow gauge on 18 August 1888,[2] creating a single narrow gauge network. On 1 October 1890[2] the Tasmanian Government bought the Tasmanian Main Line Company, creating the Tasmanian Government Railways. On 15 April 1901[2] the Devonport line was extended to Burnie, connecting with the Emu Bay Railway's line to Zeehan, which was completed on 21 December 1900.[2] The government railway was extended to Wynyard on 1 February 1913.[2] The line was extended to Wiltshire Junction on 12 July 1922,[2] connecting with the already existing line between Stanley and Smithton.[3]

Principal branch lines

  • Mole Creek Line - A branch line was opened from Deloraine (Lemana Junction) to Mole Creek on 5 April 1890. This line closed on 6 February 1985.[2]
  • Scottsdale Line - Opened from Launceston to Scottsdale on 9 August 1889 and extended to Branxholm on 12 July 1911 and Herrick on 15 March 1919.[2](currently closed).
  • Bellerive-Sorell Line - This isolated line was built between Bellerive and Sorell on the eastern shore of the Derwent River on 2 May 1892. It closed on 30 June 1926.[2]
  • Melrose Line - Opened between Don Junction and Paloona on 10 April 1916 and extended to Barrington on 23 September 1923. The line was completely closed back to the junction on 16 October 1963,[2] but the section from Don Junction to Don Township was reopened on 20 November 1976 by the Don River Railway.[4]
  • Bell Bay Line - Built between Launceston and Bell Bay on 17 May 1974[2] to access the industries established there, including shipping. This Line was included in the Federal Government's AusLink initiative.[5] It is the proposal that this line be converted to standard gauge to facilitate the transfer of mainland railway wagons direct to Bell Bay and Launceston, however no further action has been forcoming to date.[citation needed]

The former Emu Bay Railway

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The earlier lines of the West Coast, Tasmania were independent of the main Tasmanian Railway system when built, but most connected to the Emu Bay Railway. The North Mount Lyell Railway and a few other smaller lines were not connected to the Emu Bay line.

The Emu Bay Railway was purchased by Australian Transport Network on 22 May 1998,[2] thus merging that line with the remainder of the system that company then operated. Today known as the Melba line, it was excluded from the 2007 lease arrangement.[6]

Operators

Historically the mainline railways were operated by the Tasmanian Government Railways, which was absorbed into the Australian National Railways Commission in 1978 and renamed TasRail.[7] In November 1997, TasRail was sold to the Australian Transport Network, a partnership of New Zealand based Tranz Rail and United States railroad Wisconsin Central. This sale also included a 50-year lease of the Crown land on which the Tasmanian railway network was situated. Tasrail was granted the exclusive right to use and occupy the land, but owned the infrastructure situated on that land and was obliged to maintain at its own cost.[6]

In 2004 the railway was purchased by Pacific National following the purchase of Tranz Rail by Toll Holdings, and the sale of Wisconsin Central's overseas investments as a result of that railroads takeover by Canadian National. In September 2005 Pacific National angered the Tasmanian State Government and the Australian Federal Government as it threatened to 'withdraw all services' unless the governments paid a $100 million subsidy.[8] This alarmed people of Tasmania. A pullout of rail services would result in thousands more trucks on already busy roads.

Initially the governments refused to act on the issue claiming they would not be "held to mercy" by Pacific National, owned by Toll and Patrick Corporation, "which are extremely profitable multi-national companies". Later the state infrastructure minister Bryan Green and federal counterpart transport minister Warren Truss announced a $120 million rescue package hoping the board will continue operation in the state.[9]

In May 2007 the Tasmanian Government, the Federal Government and Pacific National came to an agreement regarding the funding, ownership and operation of the Tasmanian railway network. The State of Tasmania was to acquire the railway infrastructure previously leased to Pacific National. Pacific National would continue to provide rail services on the network. The Federal Government's AusLink program provided $78 million in funding for capital works. The Tasmanian Government also agreed to provide $4 million funding each year for maintenance.[6]

In September 2009 the Tasmanian Government and Pacific National formally entered into a business sale agreement for purchase of the Tasmanian rail business, with rail infrastructure and railway operations to be maintained, managed and owned by a new State-owned rail company, Tasmanian Railway Pty Ltd trading as TasRail.[10]

See also

References

  1. RailTasmania.com: X & XA Class
  2. 2.00 2.01 2.02 2.03 2.04 2.05 2.06 2.07 2.08 2.09 2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 2.19 2.20 2.21 Australian Railway Routes 1854–2000 Quinlan, Howard & Newland, John R. Australian Railway Historical Society New South Wales Division ISBN 0-909650-49-7
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. Don River Railway
  5. AusLink Network Corridors
  6. 6.0 6.1 6.2 Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.[dead link]
  10. Lua error in package.lua at line 80: module 'strict' not found.[dead link]

External links