||This article includes a list of references, but its sources remain unclear because it has insufficient inline citations. (June 2014)|
|Oscillator||1 DCO per voice
(pulse, saw, square and noise)
|LFO||triangle with delay and rate|
|Synthesis type||Analog Subtractive|
|Filter||Analog 24dB/oct resonant
low-pass, non-resonant high-pass
|Attenuator||ADSR envelope generator|
The Roland Juno-106 is an analogue polyphonic synth released by Roland Corporation in February 1984. It features Digitally controlled oscillators (DCOs) for tuning stability and digital envelope generation along with analog filters and signal path.
Features and Architecture
The Roland Juno-106 is relatively simple in terms of its synthesis architecture. Nevertheless, the Juno-106 is still quite popular among musicians and producers due to the fast sound creation workflow of the hands on interface and its ability to produce rich basses, pads, PWM [ Pulse Width Modulation ] sounds and other distinct and desirable analog tones.
The central tone-generating component of the instrument is a set of 6 digitally controlled oscillators capable of producing sawtooth and square/pulse waveforms. The Juno is well known for its -24 dB/octave analog lowpass filter with adjustable resonance, which has been said to provide the Juno 106 with its distinctive rich sound, when combined with the tone of the MC5534 wave generation modules.
The instrument's VCA can be switched between simple note gating or envelope-controlled loudness with a switch. The same envelope can also modulate the filter's cutoff frequency, in normal or inverted polarity. The filter cutoff can also track the keyboard to allow high harmonics to be heard on higher-pitched notes.
The Juno-106 features an onboard analog stereo chorus effect, which is a fairly distinctive aspect of the instrument's sound. The Juno-106's chorus is based on a set of bucket brigade delay (BBD) lines similar to other Roland products of the time including guitar pedals. The Juno-106 also contains 128 internal memory slots for patch storage as well as surprisingly complete MIDI implementation - a rarity for any synthesizers of the time, let alone analogue ones. Compared to the 60 and 6 juno models the editing controls (sliders and buttons) on the synthesizer are capable of transmitting and receiving MIDI SysEx commands, allowing complete control and more advanced MIDI based modulation of the instrument via a sequencer or computer.
Furthermore, this synthesizer features polyphonic portamento, also rather rare for a 1984 analog instrument (Kawai SX-210 -1982- and SX-240 -1983- had already portamento).
The Juno-106 was the third in the Juno series of analog synthesizers. Its predecessors, the Roland Juno-6 and Roland Juno-60, were somewhat different in appearance than their later sibling, but shared most of the internal components and features in common with the exception of a tradeoff between a simple up/down arpeggiator on the earlier models and a portamento feature on the Juno-106. The Juno-106 also featured MIDI connectivity, rather than the proprietary Roland Digital Control Bus (DCB) found on the Juno-60, along with much higher patch storage (128 spaces vs 54 on the Juno 60 and none on the Juno 6).
Roland also produced a Juno-106 variant with built-in speakers and a slightly redesigned enclosure, intended for the consumer market rather than professional users. In Japan, this version was called the "Juno-106S", and elsewhere in the world it was called the HS-60.
The Juno-106 is a unique synthesizer in a large part because it came at a time period when digital synthesizer components were just being introduced, MIDI being the most important, yet it featured the best of the analogue and digital worlds. The Juno-106 was one of the last synthesizers to feature all of its controls as buttons and sliders on the faceplate which allowed for quick programming. The Juno-106 also featured DCOs with an analog signal path including VCFs. This allowed for perfectly tuned pitch with the warmth of analogue waveshaping and filters, along with the drive provided by the VCA. It is because of this balance of analogue and digital that there really is no other synth quite like the Juno-106 and it is still a staple in many studios today.
The Juno-106 today
||This article is written like a manual or guidebook. (July 2010)|
The Juno-106 and its predecessors are traded among synthesizer aficionados with relative frequency. Thus, they are more easily obtainable than a number of other synthesizers with similar features and traits.
They are generally highly sought after and well respected instruments due to the simple hands on interface, generally robust physical build and a very common Juno trait of "Always sounding good" no matter how you program it. Junos are considered to be very, instantly, musical sounding instruments with a large sweet spot.
The "Juno" name has also become somewhat fashionable and desirable in recent years, the 106 in particular being used by a large number of credible and influential producers and musicians, this contributes to the enduring popularity and respect of these synthesizers in spite of their relatively simple architecture versus the more expensive and fully featured synths of the time.
Overall, these positives combine to make one of the most desirable vintage analog synths on the second hand market and many users appreciate them for their ease of use and good sound.
A common problem nowadays are 'dead' voice chips, in which one or more of the 6 available notes fail and sound silent, quiet, or crackly. The Juno-106 contains a custom hybrid integrated circuit for each of its six voices, the Roland 80017A VCF/VCA IC. Over time, these ICs tend to become intermittent or fail outright. Because they are no longer manufactured, third-party substitutes have become available. In recent years, some people[who?] have successfully repaired these hybrid ICs by removing the conformal coating of resin that is sometimes implicated in their failure. Numerous videos demonstrating this can be found on the internet.
Due to their enduring popularity and despite their overall simplicity and limited range of sonic possibilities, Juno-series synthesizers still make appearances with a number of bands, including The Black Eyed Peas, Blue Nile, Steve Adey, Franz Ferdinand, Covenant, Clarence Jey, Daft Punk, Dosh, Moby, The Chemical Brothers, Chvrches, Justice, Jessy Lanza, Mutemath, Sigur Rós, Solemn Camel Crew, Doll Factory, Islands, the Unicorns, Steve Hillier of Dubstar, Pet Shop Boys, Mansun, a-ha, Laserdance, Uzi and Ari, Late of the Pier, the Automatic, Tame Impala, Four Tet, Pivot, the New Deal (band), Andy Kuncl, Howlermonkey, Winter Palace, Passion Pit, Bleachers (band), Voyag3r and scores of other projects.
- Profile on Vintage Synth Explorer
- Juno-106 owner's manual
- The Juno-106 Connection
- Photo of a Juno-106 in its natural environment
- VST-AU JUNO-106 Editor (Mac and Win) from reKon audio
- Juno-106 Librarian for all platforms supporting Java
- Juno-106 pics and more
- 100% clone of the 80017A voice IC
- SynthParts.com usually has original tested working 80017As and other Juno-106 parts in stock
- Juno-106 mini-version (21⁄2 octave) modification
- You Tube demo of Juno 106
- New sounds for the Juno-106