Roman military personal equipment

From Infogalactic: the planetary knowledge core
(Redirected from Roman personal weapons)
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Roman Ensigns, Standards, Trumpets etc.

Roman military personal equipment was produced in large numbers to established patterns, and it was used in an established way. These standard patterns and uses were called the res militaris or disciplina. Its regular practice during the Roman Republic and Roman Empire led to military excellence and victory. Roman equipment (especially armor) gave them "a very distinct advantage over their barbarian enemies." [1] This did not imply that every Roman soldier had better equipment than the richer men among his opponents. According to Edward Luttwak, Roman equipment was not of a better quality than that used by the majority of its adversaries.[2]

Initially, they used weapons based on Greek and Etruscan models. On encountering the Celts, they based new varieties on Celtic equipment. To defeat the Carthaginians, they constructed an entire fleet de novo based on the Carthaginian model. Once a weapon was adopted, it became standard. The standard weapons varied somewhat during Rome's long history, but the equipment and its use were never individual.

Overview of infantry

Reenactment of a Roman legion attack.

Vegetius, 4th-century author of De Re Militari, describes the equipment he believed had been used by heavy and light infantry earlier in the empire. The names of some weapons have been changed from the Latin to the Greek forms and Greek names have been preferred, for unknown reasons, perhaps because the center of Roman military power had shifted from Rome to Constantinople. Vegetius says in translation:[3]

The infantry (armatura) was heavy, because they had helmets (cassis), coats of mail (catafracta), greaves (ocrea), shields (scutum), larger swords (gladius maior), which they call broadswords (spatha), and some smaller, which they name half-broadswords (semispathium), five weighted darts (plumbata) placed in the shields, which they hurl at the beginning of the assault, then double throwables, a larger one with an iron point of nine ounces and a stock of five and one-half feet, which was called a pilum, but now is called a spiculum, in the use of which the soldiers were especially practised, and with skill and courage could penetrate the shields of the infantry and the mail of the cavalry. The other smaller had five ounces of iron and a stock of three and one-half feet, and was called a vericulum but now is a verutum. The first line, of hastati, and the second, of principes, were composed of such arms. Behind them were the bearers (ferentarius) and the light infantry, whom now we say are the supporters and the infantry, shield-bearers (scutum) with darts (plumbata), swords (gladius) and , armed just as are nearly all soldiers today. There were likewise bowmen (sagittarius) with helmet (cassis), coat of mail (catafracta), sword (gladius), arrows (sagitta) and bow (arcus). There were slingers (funditor) who slung small stones (lapis) in slings (funda) or cudgel-throwers (fustibalus). There were artillery-men (tragularius), who shot arrows from the manuballista and the arcuballista.

In the late Roman Republic, and the early Roman Empire, most Roman infantry used swords (gladii) and specialized throwing spears (pila) as their main weapons. In the middle and Late Roman Empire, most Roman infantry used thrusting spears as their main weapons.[4]

Personal weapons

Pugio

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Reconstruction of a pugio: a Roman soldier from a northern province.

A pugio was a dagger used by Roman soldiers. It was probably a sidearm. Like other items of legionary equipment, the dagger underwent some changes during the 1st century. Generally, it had a large, leaf-shaped blade 18 to 28 cm long and 5 cm or more in width. A raised midrib ran the length of each side, either simply standing out from the face or defined by grooves on either side. It was changed by making the blade a little thinner, about 3mm, and the handle was also made out of metal. The tang was wide and flat initially, and the grip was riveted through it, as well as through the shoulders of the blade.

Around 50 AD, a rod tang was introduced, and the hilt was no longer riveted through the shoulders of the blade. This in itself caused no great change to the pugio's appearance, but some of these later blades were narrower (under 3.5 cm wide), and/or had little or no waisting, and/or had reduced or vestigial midribs.

Throughout the period, the outline of the hilt remained approximately the same. It was made with two layers of horn, wood or bone sandwiching the tang, each overlaid with a thin metal plate. Often the hilt was decorated with inlaid silver. Note that the hilt is 10–12 cm long overall and that the grip is quite narrow; which may make it seem to be too small but in fact this produced a very secure grip. An expansion or lump in the middle of the handle makes the user's grip even more secure.

Gladius

Re-enactor with Pompeii type gladius.

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Gladius is the general Latin word for "sword". In the Roman Republic, the term 'Gladius Hispaniensis' (Spanish Sword) referred (and refers today) specifically to the short sword, 50 cm-60 cm (24 inches) long, used by Roman legionaries from the 3rd century BC. Several different better-known designs followed; among collectors and historical reenactors, the two primary kinds of swords are known as the Mainz gladius, and the Pompeii gladius which follows the Mainz type, which had itself followed the 'Hispaniensis' (these names refer to where or how the canonical example was found). More recent archaeological finds have confirmed the appearance of the earlier version, the gladius hispaniensis ("Spanish sword"). The legionaries wear the gladius on the right hip.

Spatha

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

A spatha could be any sword (in late Latin), but most often one of the longer swords characteristic of the middle and late Roman Empire. In the 1st century, Roman Cavalry started using these longer swords, and in the late 2nd or early 3rd century, Roman infantry also switched to longer swords, as well as mostly changing from carrying javelins to carrying spears.[5][6]

Shorter weapons (short swords and possibly sometimes daggers) were known as semispathae or half-swords. A large 3rd-century hoard from Künzing included one triangular-bladed shortsword and several narrow-bladed short swords (with 23–39 cm blades). Bishop & Coulston suggest that some or all were made from broken spathae.[7][8]

Spears and javelins (Hasta)

Hasta

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Hasta is a Latin word meaning a thrusting spear. Hastae were carried by early Roman Legionaries; in particular they were carried by and gave their name to those Roman soldiers known as Hastati. However, during Republican times, the hastati were re-armed with pila and gladii and only the Triarii still used hasta.

A hasta was about six feet in length. The shaft was generally made from ash while the head was usually of iron.

Javelin

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Although Romans often used the word pila to refer to all thrown javelins, the term pilum also means specifically the heavy Roman throwing javelin of the legions. Lighter, shorter javelins existed, such as those used by the velites and the early legions.

Pilum

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The pilum (plural pila) was a heavy javelin commonly used by the Roman army in ancient times. It was generally somewhat less than two metres long overall, consisting of a wooden shaft from which projected an iron shank about 7 mm in diameter and 60 cm long with a pyramidal head. The iron shank may be socketed or more usually widens to a flat tang. A pilum usually weighed between two and four kilograms, with the versions produced during the Empire being somewhat lighter.

Pila were designed to penetrate both shield and armour, wounding the wearer; but, if they simply stuck in a shield, they could not easily be removed. The iron shank would bend upon impact, weighing down the enemy's shield and also preventing the pilum from being immediately re-used. The shaft would also fall off on impact, leaving the enemy with a bent shank in their shield.

Bow

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The sagittarius was armed with the bow (arcus), shooting an arrow (sagitta) with a composite bow,[9] made of horn, wood, and sinew held together with hide glue. However, Vegetius recommends training recruits "arcubus ligneis", with wooden bows. The reinforcing laths for the composite bows are found throughout the empire, even in the western provinces where wooden bows were traditional.

Dart

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Late infantrymen often carried half a dozen lead-weighted throwing-darts called plumbatae (from plumbum = "lead"), with an effective range of c. 30 m, well beyond that of a javelin. The darts were carried clipped to the back of the shield.[10]

Torso armour

Not all troops wore torso armour. Light infantry, especially in the early Republic, wore little or no armour. This was both to allow swifter movement for light troops and also as a matter of cost.

scale armour

Legionary soldiers of the 1st and 2nd centuries used a variety of armour types. Some wore mail shirts, while others wore scale armour or lorica segmentata or laminated-strip cuirass. This last type was a complex piece of armour which in certain circumstances provided superior protection to the other types of Roman armour, mail armour (lorica hamata) and scale armour (lorica squamata). The testing of modern replicas has demonstrated that this kind of armour was impenetrable to most direct and missile strikes. It was, however, uncomfortable without padding: re-enactors have confirmed that wearing a padded undergarment known as a 'subarmalis' relieves the wearer from bruising both from prolonged wear and from shock produced by weapon blows against the armour. It was also expensive to produce and difficult to maintain.[11] In the 3rd century, the segmentata appears to have been dropped and troops are depicted wearing mail armour (mainly) or scale, the standard armour of the 2nd-century auxilia. The artistic record shows that most late soldiers wore metal armour, despite Vegetius' statement to the contrary. For example, illustrations in the Notitia show that the army's fabricae (arms factories) were producing mail armour at the end of the 4th century.[12] Actual examples of both scale armour and quite large sections of mail have been recovered, at Trier and Weiler-La-Tour respectively, within 4th-century contexts.[13] Officers generally seem to have worn bronze or iron cuirasses, as in the days of the Principate, together with traditional pteruges.[14]

Lorica segmentata

A reenactor dressed as a Roman soldier in lorica segmentata

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The lorica segmentata was a type of body armour primarily used in the early Roman Empire, but the Latin name was first used in the 16th century (the ancient form is unknown). The armour itself consisted of broad ferrous (iron, but steel in modern recreations[citation needed]) strips ('girth hoops') fastened to internal leather straps. The strips were arranged horizontally on the body, overlapping downwards, and they surrounded the torso in two halves, being fastened at the front and back by means of brass hooks, which were joined by leather laces. The upper body and shoulders were protected by additional strips ('shoulder guards') and breast- and backplates. The form of the armour allowed it to be stored very compactly, since it was possible to separate it into four sections. During the time of its use, it was modified several times, the currently recognised types being the Kalkriese (c. 20 BC to 50), Corbridge (c. 40 to 120), and Newstead (c. 120 to possibly the early 4th century) types. There is also a little-known fourth type, known only from a statue found at Alba Julia in Romania, where there appears to have been a hybrid form, the shoulders being protected by scale armour and the torso hoops being fewer in number and deeper.

The earliest evidence of the lorica segmentata being worn is around 9 BC (Dangstetten), and the armour was evidently quite common in service until the 2nd century AD, judging from the number of finds throughout this period (over 100 sites are known, many of them in Britain). However, even during the 2nd century AD, the segmentata never replaced the lorica hamata - thus the hamata mail was still standard issue for both heavy infantry and auxiliaries alike. Roman soldiers, however, bought their own gear and therefore a group of men would not present the sort of 'uniform' appearance we are used to today.[citation needed] The last recorded use of this armour seems to have been for the last quarter of the 3rd century AD (Leon, Spain).

There are two opinions as to who used this form of armour. One is that only legionaries (heavy infantry of the Roman Legions) and Praetorians were issued with the lorica segmentata. Auxiliary forces would more commonly wear the Lorica hamata (mail armour), or Lorica squamata (scale armour). The second viewpoint is that both legionaries and auxiliary soldiers used the segmentata armour and this latter view is supported, to some degree, by archaeological findings. The Lorica segmentata offered greater protection than the Lorica hamata for about half of the weight, but was also more difficult to produce and repair. The expenses attributed to the segmentata may account for the reversion to ring-mail after the 3rd to 4th century. Alternatively, all forms of armour may have fallen into disuse as the need for heavy infantry waned in favour of the speed of mounted troops.

Lorica hamata

Detail of mail. Replica from 2nd century AD.

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The Lorica hamata is a type of mail armour used during the Roman Republic continuing throughout the Roman Empire as a standard-issue armour for the primary heavy infantry legionaries and secondary troops (Auxilia). They were mostly manufactured out of iron, though sometimes bronze was used instead. The rings were linked together, alternating closed washer-like rings with riveted rings. This produced a very flexible, reliable and strong armour. Each ring had an inside diameter of between 5 and 7 mm, and an outside diameter of about 7 to 9 mm. The shoulders of the Lorica hamata had flaps that were similar to those of the Greek 'Linothorax'; they ran from about mid-back to the front of the torso, and were connected by brass or iron hooks which connected to studs riveted through the ends of the flaps. Several thousand rings would have gone into one Lorica Hamata.

The manufacture of mail may have originated with the Celts.

Although labour-intensive to manufacture, it is thought that, with good maintenance, they could be continually used for several decades. Its utility was such that the later appearance of the famous Lorica Segmentata—which afforded greater protection for a third of the weight—never led to the disappearance of the ubiquitous mail, and in fact the army of the late Empire reverted to the Lorica Hamata once the Segmentata had fallen out of fashion.

Lorica squamata

Roman scale armour fragment.
Detail of a fragment. Each plate has six holes and the scales are linked in rows. Only the "lower most" holes are visible on most scales, while a few show the pair above and the ring fastener passing through them.

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The Lorica squamata was a type of scale armour used during the Roman Republic and at later periods. It was made from small metal scales sewn to a fabric backing. It is typically seen on depictions of standard bearers, musicians, centurions, cavalry troops, and even auxiliary infantry, but could be worn by regular legionaries as well. A shirt of scale armour was shaped in the same way as a lorica hamata, mid-thigh length with the shoulder doublings or cape.[15]

The individual scales (squamae) were either iron or bronze, or even alternating metals on the same shirt. They could be tinned as well, one surviving fragment showing bronze scales that were alternately tinned and plain. The metal was generally not very thick, 0.5 mm to 0.8 mm (0.02 to 0.032 in) perhaps being a common range. Since the scales overlapped in every direction, however, the multiple layers gave good protection. The size ranged from as small as 6 mm (0.25 in) wide by 1.2 cm tall up to about 5 cm (2 in) wide by 8 cm (3 in) tall, with the most common sizes being roughly 1.25 by 2.5 cm (0.5 by 1 in). Many have rounded bottoms, while others are pointed or have flat bottoms with the corners clipped off at an angle. The scales could be flat, or slightly domed, or have a raised midrib or edge.[16] All the scales in a shirt would generally be of the same size; however, scales from different shirts may vary significantly.

The scales were wired together in horizontal rows that were then laced or sewn to the backing. Therefore, each scale had from four to 12 holes: two or more at each side for wiring to the next in the row, one or two at the top for fastening to the backing, and sometimes one or two at the bottom to secure the scales to the backing or to each other.[17]

It is possible that the shirt could be opened either at the back or down one side so that it was easier to put on, the opening being closed by ties. Much has been written about scale armour’s supposed vulnerability to an upward thrust, but this is probably greatly exaggerated.[18]

No examples of an entire lorica squamata have been found, but there have been several archaeological finds of fragments of such shirts and individual scales are quite common finds - even in non-military contexts.

Limb armour

Manica

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

From early Imperial times to after the fall of the Western Empire, some troops wore segmented armor on one or both arms.

Greave

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Greaves, sheet metal protecting the legs, were widely used in the late Republic, and by some troops in the Imperial army.

Shields

Scutum

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Parma

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The parma was a circular shield, three Roman feet across. It was smaller than most shields, but was strongly made and regarded as effective protection. This may have been due to the use of iron in its frame.[19] It had a handle and a shield boss (umbo).

The Parma was used in the Roman army of the mid-Republic, by the lowest class division of the army — the Velites. The Velites' equipment consisted of a parma, javelin, sword and helmet. Later, the parma was replaced by the scutum.

Cetra

A light shield of wood and leather, the name from Greek (καίτρεα, Hesych.). Used by tribesmen from Hispania, Mauretania, and Britannia.[20]

Helmets

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Cavalry parade helmet, latter half of the 2nd century AD, from the German limes.

Roman helmets, galea or cassis, varied greatly in form. One of the earliest types was the Montefortino helmet used by the Republic armies up to the 1st century BC. This was replaced directly by the Coolus helmet, which "raised the neck peak to eye level and set a sturdy frontal peak to the brow of the helmet".[21]

Clothing

  • Tunic: basic garment worn under the armour by all soldiers in the Republic and early Empire. Normally made of wool. Tunics originally consisted simply of a piece of rectangular cloth sewed to an identical piece, with holes for the arms and head left unsewn. Later, it became fashionable for tunics to be produced with sleeves, and worn with braccae.
  • Focale: scarf worn by Roman legionaries to protect the neck from chafing caused by constant contact with the soldier's armor (typically lorica hamata or lorica segmentata) and helmet.
  • Cloak: two types of cloaks were used, the sagum and the paenula. Both were made from wool, which insulated and also contained natural oil to repel water. It was fastened with a fibula. The paenula was hooded in colder climates. Since every common soldier slept in the open, it was important that he have a warm full-length wrap, but necessary that he carry it with him each day regardless of his activities. This was accomplished by a cloak of more than body length, double-folded so that it did not fall beneath the knees when worn. An excellent illustration of this is the statue of Caesar Augustus atop the theater in the Roman city of Orange, in what is now France.
  • Caligae: military boots worn by Roman legionaries and auxiliaries throughout the history of the Roman Republic and Empire. The boots were made from leather and laced up the center of the foot and onto the top of the ankle. Iron hobnails were hammered into the sole for added strength. Similar to the modern cleat.
  • Pteruges: skirt of leather or fabric strips that is worn around the waist to protect the upper legs. Pteruges could be fitted with small metal studs and plates to provide additional protection.

Sarcina

Marching packs of two soldiers illustrated on Trajan's Column showing loculus, cloak bag, patera, cooking pot and "netted object".

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Military pack carried by legionaries. The pack included a number of items suspended from a furca or carrying pole. Items carried in the pack include:

  • Waterskin: Roman camps would typically be built near water sources, but each soldier would have to carry his water for the day's march in a waterskin.
  • Food: Each legionary would carry some of his food. Although a Roman army on the move would typically have a baggage train of mules or similar to carry supplies such as food, after the Marian reforms legionaries were required to carry about 15 days worth of basic food supplies with them. Most basic foot soldiers had to carry the food in a sarcina or pack.
  • Cooking equipment: Including a patera (mess tin), cooking pot and skewer. A patera was a broad, shallow dish used for drinking, primarily in a ritual context such as a libation.
  • Entrenching tools: Carried by legionaries to construct fortifications and dig latrines etc. Each legionary would typically carry either a shovel or dolabra (mattock) for digging, a turf cutting tool or a wicker basket for hauling earth.
  • Sudis: Stakes for construction of camps.

Other

Flags

Ballista

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The ballista was a powerful ancient crossbow, powered by torsion in bundles of sinew, rather than torsion in the arms. Early versions ejected heavy darts called bolts, or spherical stone projectiles of various sizes.

Scorpio

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The scorpio was a torsion-powered catapult-type weapon used for precision fire and also for parabolic shooting. It fired bolts capable of piercing enemy shields and armor. The Roman army supplied 60 to each legion.

Catapult

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

A catapult is any siege engine which uses an arm to hurl a projectile. The Roman version was called an onager. Projectiles included both arrows and (later) stones.

Dolabra

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The Dolabra was an Italian pickaxe used as an entrenching tool.

Buccina

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

buccina

A brass instrument used in the ancient Roman army. It was originally designed as a tube measuring some 11 to 12 feet in length, of narrow cylindrical bore, and played by means of a cup-shaped mouthpiece. The tube is bent round upon itself from the mouthpiece to the bell in the shape of a broad C and is strengthened by means of a bar across the curve, which the performer grasps while playing, in order to steady the instrument; the curves over his head or shoulder.

The buccina was used for the announcement of night watches and various other purposes in the camp.

The instrument is the ancestor of both the trumpet and the trombone. The German word for trombone, Posaune, is derived from Buccina.

Tribulus

Caltrop, line drawing

A tribulus (caltrop) is a weapon made up of four sharp nails or spines arranged in such a manner that one of them always points upward from a stable base (for example, a tetrahedron). Caltrops serve to slow down the advance of horses, war elephants, and human troops. It was said to be particularly effective against the soft feet of camels.[22]

The late Roman writer Vegetius, in his work De Re Militari, wrote:

The scythed chariots used in war by Antiochus and Mithridates at first terrified the Romans, but they afterwards made a jest of them. As a chariot of this sort does not always meet with plain and level ground, the least obstruction stops it. And if one of the horses be either killed or wounded, it falls into the enemy's hands. The Roman soldiers rendered them useless chiefly by the following contrivance: at the instant the engagement began, they strewed the field of battle with caltrops, and the horses that drew the chariots, running full speed on them, were infallibly destroyed. A caltrop is a machine composed of four spikes or points arranged so that in whatever manner it is thrown on the ground, it rests on three and presents the fourth upright.[23]
NOTE; THE LINE DRAWING OF THE CALTROP IS ERRONEOUS. IT SHOWS FOUR BASE SPIKES, AND IN ORDER TO BE FUNCTIONAL WOULD REQUIRE A FIFTH (VERTICAL) SPIKE, WHICH WOULD DESTROY THE FUNCTIONALITY. A CALTROP HAS THREE "BASE" SPIKES AND A FOURTH L SPIKE, WHICH IS VERTICAL NO MATTER WHAT ORIENTATION THE DEVICE HAS AT REST.

See also

External links

Notes

  1. Elton, Hugh, 1996, Warfare in Roman Europe, AD 350-425, p. 110
  2. In Luttwak, E., The Grand Strategy of the Roman Empire, JHUP, 1979, Luttwak states that "Roman weapons, far from being universally more advanced, were frequently inferior to those used by... enemies"
  3. Book 2 Chapter 15. The nominative singular of the weapon has been placed in parentheses.
  4. Stephenson, I.P., 2001, Roman Infantry Equipment: The Later Empire, p. 56
  5. Stephenson, I.P., 2001, Roman Infantry Equipment: The Later Empire, Tempus, pp. 58 & 60-75.
  6. M.C. Bishop & J.C.N. Coulston, 2006, Roman Military Equipment: From the Punic Wars to the Fall of Rome, Oxbow Books, pp. 82-83, 130, 154-157 & 202.
  7. Stephenson, I.P., 2001, Roman Infantry Equipment: The Later Empire, Tempus, p. 79.
  8. M.C. Bishop & J.C.N. Coulston, 2006, Roman Military Equipment: From the Punic Wars to the Fall of Rome, Oxbow Books, p. 157.
  9. Roman Military Equipment from the Punic Wars to the Fall of Rome (Paperback). M.C. Bishop, J.C. Coulston. Oxbow Books 2005. ISBN 1-84217-159-3 ISBN 978-1842171592
  10. Goldsworthy (2000) 167; (2003) 205
  11. Goldsworthy (2003) 129
  12. Notitia Oriens.XI
  13. Bishop and Coulston (2006) 208
  14. Elton (1996) 111
  15. http://www.larp.com/legioxx/squamata.html
  16. http://www.larp.com/legioxx/squamata.html
  17. http://www.larp.com/legioxx/squamata.html
  18. http://www.larp.com/legioxx/squamata.html
  19. http://penelope.uchicago.edu/Thayer/E/Roman/Texts/secondary/SMIGRA*/Parma.html Parma, in Smith's Dictionary of Greek and Roman Antiquities, at LacusCurtius
  20. Cetra. Article by James Yates, M.A., F.R.S., on pp269‑270 of: William Smith, D.C.L., LL.D.: A Dictionary of Greek and Roman Antiquities, John Murray, London, 1875. http://penelope.uchicago.edu/Thayer/E/Roman/Texts/secondary/SMIGRA*/Cetra.html
  21. Santosuosso, A., Soldiers, Emperors and Civilians in the Roman Empire, Westview, 2001, p.131
  22. Lua error in package.lua at line 80: module 'strict' not found.
  23. Lua error in package.lua at line 80: module 'strict' not found.

References