SNCASE SE-2300
| SE-2300 | |
|---|---|
| Role | Two or three seat tourer |
| National origin | France |
| Manufacturer | Sud-Est (Société nationale des constructions aéronautiques du Sud-Est or SNCASE) |
| Designer | Pierre Satre |
| First flight | 26 October 1945 |
| Number built | 3 |
The Sud-Est SE-2300 or S.N.C.A.S.E. SE-2300 was a two/three seat low wing, single engine touring aircraft, built just after World War II in France. The SE-2310 was a tricycle undercarriage variant. Neither type went into production.
Contents
Design and development
Pierre Satre, who later was chief designer of the Concorde, began the SE-2300 design during World War II and it first flew on 26 October 1945.[1] It was a conventionally laid out, all metal, two seat, single engine cantilever monoplane, with tapered low wings having 4° of dihedral built around inverted U-section main and auxiliary spars. The wings had a centre section integral with the fuselage and two outer panels, all covered with electrically welded skin. There were plain flaps, with a maximum deflection of 40°.[2]
The fuselage of the SE-2300 was constructed from four pre-formed panels welded together. A 140 hp (104 kW) Renault Bengali 4 four cylinder, inverted, air-cooled inline engine, fed from a fuselage tank, drove a two blade propeller. The over-wing cabin seated two side-by-side with dual controls. Behind these seats was space for a third (optional in the SE-2300 and standard in the SE-2310 variant) and baggage. There were access doors and rear view transparencies on both sides. At the rear, the tailplane was mounted at mid-fuselage and the fin and deep rudder were straight tapered except near the keel and almost triangular above the fuselage.[2]
The first and only SE-2300 had a fixed conventional undercarriage with oleo-pneumatic springing, faired main legs and wheels and a swivelling tailwheel.[2] The two SE-2310s had tricycle undercarriages, the first unfaired[2] but the second with faired legs and spats.[3]
Operational history
With a four-seat version, the SE-2311 under development but unbuilt, the three seat SE-3010 was entered into a 1946 French Transport Ministry contest for a four-seat tourist aircraft in February 1946. It was not successful, the award going to the Nord 1200 Norécrin and development of the SE-2300 series was abandoned. The last example remained in use until at least 1956 as a company hack.[1]
Variants
- SE-2300
- Original version, two or three seats, conventional undercarriage.[2]
- SE-2310
- Three seats, tricycle undercarriage.[2] Two built, the second with faired undercarriage legs and wheels.[1][3]
- SE-2311
- Three seat, 101 kW (135 hp) Regnier 4L-00 engine.[4]
Specifications (SE-2300)
Data from Jane's All the World's Aircraft 1948[2]
General characteristics
- Capacity: Two or three
- Length: 7.40 m (24 ft 3 in)
- Wingspan: 10.13 m (33 ft 3 in)
- Height: 2.11 m (6 ft 11 in)
- Wing area: 15.0 m2 (161 sq ft)
- Empty weight: 685 kg (1,510 lb) equipped
- Gross weight: 1,015 kg (2,238 lb)
- Powerplant: 1 × Renault Bengali 4Pei 4-cylinder inverted air-cooled inline engine, 140 kW (190 hp) at 500 m (1,640 ft) and 2,400 rpm
- Propellers: 2-bladed, 1.90 m (6 ft 3 in) diameter wooden
Performance
- Maximum speed: 235 km/h (146 mph; 127 kn)
- Cruising speed: 212 km/h (132 mph; 114 kn)
- Range: 900 km (559 mi; 486 nmi)
- Service ceiling: 4,650 m (15,256 ft)
- Wing loading: 67 kg/m2 (14 lb/sq ft)
- Power/mass: 0.10 kW/kg (0.063 hp/lb)
- Landing speed: 75 km/h (47 mph; 40 kn)
- Landing distance: 300 m (985 ft) from 8 m (26 ft) with flaps down
References
 |
Wikimedia Commons has media related to SNCASE aircraft. |
- ↑ 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
