SNCF Class 141R

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
SNCF 141.R
141-R-568-a.jpg
141 R 568 at Gray on 1981-11-27
Type and origin
Power type Steam
Total produced 1340
Specifications
Configuration 2-8-2
UIC class 1′D1′ h2
Gauge 4 ft 8 12 in (1,435 mm)
Driver diameter 1.65 m (65 in)
Length 14.64 m (48 ft 0 in) (loco only)
24.13 m (79 ft 2 in) (total)
Loco weight 115.5 t (113.7 long tons; 127.3 short tons) (coal loco)
116.25 t (114.41 long tons; 128.14 short tons) (oil loco)
Tender weight 75 t (74 long tons; 83 short tons) (30.R tender)
Fuel type Coal or fuel oil
Boiler pressure 1.55 MPa (225 psi)
Firegrate area 5.2 m2 (56 sq ft)
Cylinders Two, outside
Cylinder size 597 mm × 711 mm (23.5 in × 28.0 in)
Performance figures
Maximum speed 100 km/h (62 mph)
Power output 2.154 MW (2,889 hp) at
80 km/h (50 mph)
Tractive effort 202.4 kN (45,500 lbf)

The SNCF 141 R is a class of 2-8-2 steam locomotives of the Société Nationale des Chemins de fer Français (French State Railways). They were used all over the French rail network from 1945–1974.

File:Plaque-141-R-427.jpg
Cab side numberplate from locomotive 141.R.427

History

At the end of World War II, there was a shortage of locomotives, and to quickly obtain the large number needed locomotives were ordered from the main American and Canadian locomotive builders under the Lend-Lease Program (and not the Marshall Plan, signed in April 1948, as often written).

The design was based on the Green Bay & Western Railroad's successfully customised Mikados, based somewhat on the USRA Light Mikado, suitably modified to meet the SNCF loading gauge. Modifications included the overall height, the fitting of European couplers and buffers, left-hand drive, smoke deflectors (to a unique and instantly recognisable style) and a Kylchap exhaust on the second batch.

The first order for 700 engines was placed in February 1945 with production split between the "big three" American locomotive builders: Baldwin Locomotive Works, Philadelphia, Pennsylvania, American Locomotive Company, Schenectady, New York, and Lima Locomotive Works, Lima, Ohio. Once financing was made available, the second batch of 640 engines was ordered from the "big three", plus the Canadian manufacturers Montreal Locomotive Works, Montreal Quebec and Canadian Locomotive Company, Kingston, Ontario. Most of this batch were built as oil burners, burning preheated heavy fuel oil (known in French as 'Mazout'), unlike the first batch which had all been designed as coal fired.

The massive introduction of oil fired locomotives was due to the fact that in the immediate post-war period, the quality coal was in high demand and SNCF was consuming 9 million tons per annum. Oil thus allowed savings in coal, even if in many depots it required a revolution in working conditions. The extra range permitted by oil—700 km (435 mi) instead of 400 km (250 mi)—explains also the more intensive use of the locomotives. The enginemen nicknamed the locomotives mazoutières or charbonnières ("coal-scuttles") according to fuel employed; oil-burners were also called les goudronneuses ("tar spraying machines") by their crews.

Builder Serial
number
Quantity SNCF number
Lima Locomotive Works
8867–9046
180
141 R 1 – 141.R.180
American Locomotive Company
74054–74313
260
141 R 181 – 141.R.440
Baldwin Locomotive Works
72254–72513
260
141 R 441 – 141 R 700
Baldwin Locomotive Works
72699–72763
65
141 R 701 – 141 R 765
72857–72897
41
141 R 766 – 141 R 806
72928–72981
54
141 R 807 – 141 R 860
American Locomotive Company
73934–74053
120
141 R 861 – 141 R 980
74833–74872
40
141 R 981 – 141 R 1020
Lima Locomotive Works
9112–9211
100
141 R 1021 – 141 R 1120
American Locomotive Company
74916–74955
40
141 R 1121 – 141 R 1160
Baldwin Locomotive Works
72982–73017
36
141 R 1161 – 141 R 1196
73046–73049
4
141 R 1197 – 141 R 1200
Montreal Locomotive Works
75010–75109
100
141 R 1201 – 141 R 1300
Canadian Locomotive Company
2368–2407
40
141 R 1301 – 141 R 1340

After the second world war, the American manufacturers' output had been boosted by the war effort. Thus from July 1945 to May 1946 the 700 141 R of the first batch were built in only eleven months. It is possible to observe significant variations in monthly production. Large scale production started in September, and reached its height during October, November, December and January, to slow down in February and March, and to continue until finished in May, or, an average of almost three engines per day! By way of comparison in French locomotives works (French industry having been weakened by the war) it took four years, from June 1948 to July 1952, for the manufacturer Schneider to deliver 35 241 P to the SNCF.

The first engine, the 141 R 1 built by Lima, left the workshops on 30 July 1945. The 141 R 466 was the first to be unloaded in France on 17 November 1945, at the port of Marseille. The last of the series, the 141 R 1340, left the workshops of Canadian Locomotive Company in July 1947 and on 5 September was unloaded at the port of Cherbourg. Seventeen engines (the 141 R 1220–1235 and 141 R 1241) were lost at sea when the ship transporting them, the Norwegian ship MV Belpamela sank in a violent storm off Newfoundland on 11 April 1947. So of the 1340 engines initially ordered, only 1323 entered in service on the French network.

For the SNCF, this type of machine constituted a small revolution - with simple expansion and very advanced construction techniques, the 141 R 1101–1340 were the only SNCF steam locomotives equipped with Boxpok wheels, and roller bearings on all the driving and coupled axles, as well as an almost indeformable one-piece cast steel frame. The bar frames and the axle box bearings of 141 R 1–1100, appeared irreproachable, which made them powerful machines but economical to maintain. For 141 R 1101–1340, the maximum mileage run between two main works visits was up to 230,000 kilometres (140,000 mi). Easy to drive, they offered relatively modern comfort for both drivers and firemen. The cabs were fully enclosed, equipped with a comfort and an ergonomic hitherto unknown to SNCF crews. Driving and firing controls were within reach while seated, with automatic coal feeding thanks to the mechanical stoker, and oil-firing was even easier. They were banalisées ("standardised"), that is, not assigned to a particular crew.

On the 19 October 1975 the last 141 R in use with the SNCF, 141 R 1187 of Vénissieux depot, worked a special return working between Lyon and Veynes. Four locomotives of Narbonne depot were leased to the Hellenic State Railways from November 1973 to April 1974.

File:141-R-1199-d.jpg
The driver's cab of the 141 R 1199.

Preserved locomotives

Twelve 141.R locomotives have been preserved. Among them, in operating condition are:

  • 141 R 420, (coal) based in Clermont-Ferrand, managed by the Sté Civile de Conservation de la 141 R 420.
  • 141 R 840, (oil) based in Aubrais-Orléans, managed by the "AAATV" : Amicale des Anciens et Amis de la Traction à Vapeur, section Centre/Val de Loire.
  • 141 R 1126, (oil) owned by the SNCF, based in Toulouse, managed by L'Amicale des Cheminots pour la Préservation de la 141 R 1126
  • 141 R 1199, (oil) owned by the SNCF, based in Nantes, managed by Loco Vapeur R 1199

These four locomotives are protected as monument historique (national heritage objects).

Five locos are based in Switzerland with two in working order:

  • 141 R 568 (coal) ex CITEV
  • 141 R 1244 (oil).

Another three are stored there as spare parts after the bankruptcy of the company in charge of their restoration.

  • 141 R 73 (coal)
  • 141 R 1207 (coal)
  • 141 R 1332 (oil)

The three remaining locomotives are all the property of the SNCF, and are preserved as static exhibits.

Image gallery

References

  • Translated from the French language Wikipedia, December 2007

External links