|Australian Cruiser Tank Mk. 1 "Sentinel"|
An AC MkI tank on trials
|Place of origin||Australia|
|Manufacturer||New South Wales Railway Company|
|Weight||28 long tons (28.4 t)|
|Length||20 feet 9 inches (6.32 m)|
|Width||9 feet 7⁄8 inch (2.77 m)|
|Height||8 feet 4 3⁄4 inches (2.56 m)|
|Crew||5 (Commander, Gunner, Loader/Operator, Driver, Hull MG gunner)|
|Armour||Hull front 65 millimetres (2.6 in)
sides and rear 45 millimetres (1.8 in)
Turret 65 millimetres (2.6 in) all round
|2 pounder tank gun, 130 rounds|
|two .303 (7.7 mm) Vickers machine guns, 4,250 rounds|
|Engine||3 x Cadillac V8
330 horsepower (246 kW)
|Suspension||Horizontal Volute Spring|
|150 miles (240 km)|
|Speed||30 miles per hour (48 km/h)|
The Sentinel tank was a cruiser tank designed in Australia in World War II in response to the war in Europe, and to the threat of Japan expanding the war to the Pacific or even a feared Japanese invasion of Australia. It was the first tank to be built with a hull cast as a single piece, and the only tank to be produced in quantity in Australia. The few Sentinels that were built never saw action as Australia's armoured divisions had been equipped by that time with British and American tanks.
When design work began in November 1940, the AC1 was originally intended to be a 2 pounder gun-equipped vehicle, that was intended to be a true Cruiser tank, with a weight of between 16 and 20 tonnes. Due to a lack of home grown experience in tank design a mission was sent to the US to examine the M3 design and Colonel W.D. Watson MC, an artillery officer with many years of tank design experience was provided by the UK. He arrived in December 1940. Like the Canadian Ram, the Australian Cruiser was to be based on the engine, drive train, and lower hull of the American M3 Medium tank, mated to an upper hull and turret built closely along the lines of a British Crusader. By 1942, attempting to keep pace with German tank developments, the design specification had become more like an American medium tank, resulting in a heavier design and a higher silhouette profile.
The Australian Cruiser tank Mark 1 (AC1) was designated "Sentinel" in February 1942. Manufactured by the New South Wales Railway Company, fabrication took place at Sydney's Chullora Tank Assembly Shops with serial production vehicles emerging in August 1942, the premises also being used as a testing ground. The design used existing parts where available from other tank designs, simplified where necessary to match the machining capacity present in Australia. The hull was cast as a single piece, as was the turret; a technique not used on the hull of any other tanks of the era.
The original vehicle was designed to mount a QF 2 pounder this was later changed to a QF 6 pdr (57 mm, 2.25 in). However, none of these were available and the first 65 tanks were built with the 2 pounder. Two Vickers machine guns were carried as secondary armament, one in the hull and a second mounted coaxially beside the main gun. The preferred engines suitable to power a 28 tonne tank, a Pratt & Whitney Wasp single row petrol radial, or a Guiberson diesel radial, were not available within Australia, so the Sentinel was powered by the combined output of three Cadillac 346 in³ (5.7 L) V8 petrol car engines installed in clover-leaf configuration (two engines side-by-side to the front and a single to the rear: all three feeding a common gearbox). Sixty-five production vehicles had been completed by June 1943.
The Sentinel was to be succeeded by the AC3, a much improved design with better armour protection, and most importantly increased firepower. The next step up in firepower available in Australia was the 25 pounder (87.6 mm, 3.45 in) gun-howitzer. This was quickly redesigned as a tank gun, work that would later prove useful for the design of the Short 25 Pounder. Mounted in a fully traversable turret larger than that of the AC1 but using the same 54 in (1.4 m) turret ring, it was slightly cramped for the turret crew but gave the AC3 both armour piercing capability as well as an effective high explosive round. The hull machine gun and gunner were removed from the design to make room for stowage of the larger 25 pounder ammunition. Powered by the same three Cadillac V8 engines as the AC1, they were now mounted radially on a common crank case and geared together to form the "Perrier-Cadillac",[Note 1] a single 17.1 L, 24 cylinder engine, very similar in some respects to the later A57 Chrysler multibank used in some variants of the US M3 and M4 tanks. One pilot model AC3 had been completed and work had started on producing 25 tanks for trials when the programme was terminated.
In an effort to further improve the firepower of the Australian produced tanks, a turret was developed and mounted on one of the earlier development vehicles to assess the vehicle's ability to mount the foremost Allied anti-tank gun of the day – the British 17 pounder (76 mm, 3 in). This was achieved by mounting two 25 pounder gun-howitzers which when fired together would significantly exceed the recoil of a 17 pounder. It was later fitted with a 17 pounder and after successful gunnery trials the 17 pounder was selected for the AC4 design. For the AC4 the 17 pounder was to be mounted in a new and larger turret, attached by a 70 inch (1778 mm) diameter turret ring, the space for which was accommodated by changes to the upper hull permitted by the compact nature of the "Perrier-Cadillac".
The completed Sentinel tanks were used for evaluation purposes only and were not issued to operational armoured units. The Australian Cruiser tank programme was terminated in July 1943 believing it better for Australia to put the effort spent on the AC tanks towards building her own railway locomotives and supporting the large number of US tanks due to arrive. The tanks that had been produced were placed in storage until the end of the war. In 1943, the 3rd Army Tank Battalion was equipped with a squadron of AC1 tanks which had been modified to resemble German tanks. These tanks were used in the filming of the movie The Rats of Tobruk. This appears to have been the only time a squadron of Sentinels was used for any purpose.
All but three tanks were disposed of by the Australian government in 1945.[Note 2] The 65 tanks that were not required to serve as a physical record in war museums in Australia and the UK were sold off by the Commonwealth Disposals Commission.
Of the three that were retained the first is at the RAAC tank museum at Puckapunyal Victoria (AC1 serial number 8030), and the second is at the Bovington Tank Museum (AC1 serial number 8049), the third and only completed AC3 (serial number 8066) is located at the Treloar Technology Centre at the Australian War Memorial in Canberra.
From those that were sold, mostly for agricultural use, include a third AC1, reassembled at the Melbourne Tank Museum using the hull of AC1 8006 and the turret of AC1 8040, is now located at the Camp Mabry Museum in Austin, Texas. Another tank is exhibited at the Australian Armour and Artillery Museum, in Cairns, Queensland. This tank has a largely uncut hull, with turret, gearbox and running gear, otherwise bare inside. This vehicle consists of the hull of AC1 8040 and an AC3 turret. The tank was externally restored in 2014. It now has an 17 pounder barrel in an attempt to represent the AC4 prototype, the mantlet and gun mount were fabricated by the museum.
- AC I "Sentinel"
- AC III "Thunderbolt"
- one 25 pounder gun (120 rounds)
- one Vickers machine gun
- Crew reduced to 4 with the removal of the hull MG from the design
- three Cadillac V8 engines mounted on a common crank case
- Tanks of comparable role, performance, and era
- Other Commonwealth tanks of the Second World War
- Bob Semple tank – New Zealand indigenous tank design
- Grizzly tank – Canadian licence built M4A1 Sherman
- Schofield tank – New Zealand indigenous tank design
- Named after the French engineer Robert Perrier who was largely responsible for the design, see Mellor 1958, p. 319.
- Some sources state that the Sentinels were used for training after the cancellation of the program, and were not declared obsolete by the Australian Army for this purpose until 1956, see Mellor 1958, p. 308 and Bingham 1972, p. 73. However, Koudstaal 2005 states that the Sentinels were too different to the M3s and Matildas to be used for training and would require modifications and the manufacture of spares if they were to be used as special purpose vehicles. In 1945, three had been selected for preservation in war museums, while the remainder were dismantled.
- Department of Armoured Fighting Vehicle Production (March 1943): Provisional Workshop Manual, Tank Australian Cruiser Mk. 1
- Hopkins 1978, pp. 66–67.
- Bingham 1972, pp. 65–66.
- Norris 2012, Chapter 5 – The War Widens: The Campaigns of 1942.
- Mellor 1958, p. 304.
- Bishop 2002, pp. 29–30.
- Ross 1995, pp. 382–384.
- "MP508/1, 325/703/3084 G.S. Specifications Cruiser Tank AC3 and AC4". National Archives of Australia.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Bingham 1972, pp. 65–73.
- Ross 1995, pp. 391–392.
- "A816, 45/302/184 Australian tank production (File No.2)". National Archives of Australia.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Bingham 1972, p. 66.
- Bingham 1972, p. 70.
- Koudstaal 2005.
- Handel 2003, p. 166.
- "MT1274/1 325/0118/1". National Archives of Australia. Retrieved 22 June 2014.
Australian "Cruiser" tanks: dismantling and disposal of 63 in total 66<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "No Demand For Army Tanks". Townsville Daily Bulletin. Townsville, Queensland: National Library of Australia. 2 February 1946. p. 2. Retrieved 21 June 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Sharik, Lisa (28 January 2015). "What is that?". Texas Military Forces Museum. Retrieved 25 May 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Exhibits". The Australian Armour & Artillery Museum. Retrieved 27 May 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Fletcher 1989, p. 101.
- "MP392/36 – 269/12/1713 – Tanks Aust Cruiser Mark 3 (Experimental)". National Archives of Australia.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Lua error in Module:Citation/CS1/Identifiers at line 47: attempt to index field 'wikibase' (a nil value).
- Bishop, Chris (2002). The Encyclopedia of Weapons of World War II. New York: MetroBooks. ISBN 9781586637620.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Fletcher, David (1989). The Great Tank Scandal: British Armour in the Second World War Part 1. Her Majesty's Stationery Office. ISBN 0-11-290460-2.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Handel, Paul (2003). Dust, Sand and Jungle: A History of Australian Armour During Training and Operations, 1927–1948. Puckapunyal, Victoria: RAAC Memorial and Army Tank Museum. ISBN 1-876439-75-0.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Hopkins, Ronald (1978). Australian Armour: A History of the Royal Australian Armoured Corps 1927–1972. Puckapunyal, Victoria: Royal Australian Armoured Corps Tank Museum. ISBN 0-642-99407-2.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Koudstaal, Michael (2005). "Australian Military Vehicles Index: Australian Sentinel Tank". Sentinel. Retrieved 8 June 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Lua error in Module:Citation/CS1/Identifiers at line 47: attempt to index field 'wikibase' (a nil value).
- Norris, John (2012). World War II Trucks and Tanks. Stroud: The History Press. ISBN 9780752490731.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Ross, A.T. (1995). Armed and Ready: The Industrial Development and Defence of Australia 1900–1945. Wahroonga, New South Wales: Turton & Armstrong. ISBN 0-908031-63-7.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
|Wikimedia Commons has media related to Sentinel tank.|