Shannon Racing Cars
|Formula One World Championship career|
|First entry||1966 British Grand Prix|
|Last entry||1966 British Grand Prix|
Shannon Racing Cars was a Formula One constructor from the United Kingdom with Aiden Jones, formerly a mechanic for Prince Bira and Prince Chula, and Paul Emery as the principals. Using a car built by former Emeryson designer Emery and an old Coventry Climax engine, they participated in a single Grand Prix. Trevor Taylor drove for the team at the 1966 British Grand Prix, retiring early in the race. The car was then used for Formula 3 until 1969.
The only F1 chassis Shannon Racing Cars made had steel monocoque frame, upper and lower wishbone front suspension with outboard brake and anti-roll bar. It was a very compact design with upper I arm and lower reversed A arm with upper and lower radius arms mated with outboard spring/damper unit, outboard brake and anti-roll bar in the rear. The rear arm of the front upper A arm was much thicker than the front tube, acting as a canti-lever to operate the inboard spring/damper unit mounted vertically. The monocoque extended to the rear of the engine, with the gearbox sticking out further aft. Another monocoque tub was made in aluminium, but was never used.
Coventry Climax 2.5L FPE Godiva V8 had been built 12 years earlier in 1954 for Kieft F1, but was not released for a lack of proper fuel injection. The entire stock of parts was sold to Andrew Getley, who permitted Paul Emery to convert one unit to the 1966 3L F1 format, which required it to run on pump gasoline as opposed to the original alcohol.
The SH1 arrived at Brands Hatch with Syd Fox as the driver, who drove on the practice day. Pannier fuel tanks were installed overnight to cope with the fuel consumption of the 3-litre engine. However, the decision was made to offer the seat to Trevor Taylor, who qualified and started the race. After one lap, one of the pannier tanks developed a leak, and the car was retired.
A petrol company sponsorship was promised but fell through, and SH1 received a 1-litre Cosworth MAE built by Holbay (later by EMC Motorsport), fitted with two twin-choke diagonal throat sand-cast Weber carburetors for Formula 3 racing. This car participated in many F3 races in the hands of John Wilson and Keith Jupp until 1969. Wilson later recalled the car handled better than the competition that had two or three years newer designs.
The subsequent owner of SH1 obtained a Climax FPE from Gordon Chapman, then owner of the FPE parts, and the car and the engine are said to be in Austria with Mr. Burkhardt List along with a collection of Emeryson racing cars.
Complete Formula One results
(key) (results in bold indicate pole position; races in italics indicate fastest lap)
|1966||Shannon SH1||Climax FPE V8||D||MON||BEL||FRA||GBR||NED||GER||ITA||USA||MEX||0||NC|
- "Shannon F1 Project". 26 May 2008. Retrieved 12 December 2013.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>