Slingsby Kite

T.6/T.23 Kirby Kite
300px
Shuttleworth Collection's T.6 Kirby Kite
Role	Sport Glider
National origin	United Kingdom
Manufacturer	Slingsby Sailplanes
Designer	Fred Slingsby
First flight	August 1935
Number built	25 (+1 from plans in the USA)
Developed from	Slingsby T.5 Grunau Baby II

The Slingsby T.6/T.23 Kirby Kite was a single-seat sport glider produced from 1935, by Fred Slingsby in Kirbymoorside, Yorkshire.

Design and development

During the early 1930s there was a dearth of high-performance gliders that could be flown by relatively inexperienced pilots. To remedy this shortcoming Fred Slingsby modified the Grunau Baby design with longer gulled wings and rounded fuselage formers skinned with plywood, resulting in the T.6 Kirby Kite. Later developments included spoilers to improve landing performance and an enlarged rudder which improved the harmony of the controls. Further re-design was carried out at the end of World War II, with a raised wing pylon, landing wheel and spoilers fitted as standard. The T.23 Kite 1A flew in December 1945 but did not enter production due to the limited improvement in performance, but further development was planned, as the Type 23A, with a new 1° dihedral straight wings, the production of which is uncertain. The final iteration of the Slingsby Grunau Baby derivatives was the T.26 Kite 2, which introduced an entirely new wing, an enclosed cockpit, straight tapered wings and other detailed improvements.

File:Kirby Kite.jpg

Slingsby T.6 Kirby Kite BGA310 at Old Warden, 2013

History

The T.6 Kirby Kite was immediately in demand for competition and club flying, but their performance was soon overtaken by newer gliders. Production continued until 1939 totalling 25, of which one was exported to South Africa, one to Canada and one to Rhodesia. One more was built from plans by Herman Kursawe in the USA. Almost all the Kirby Kites still flying at the outbreak of World War II were impressed into the Royal Air Force for use as training aircraft for assault glider pilots. Kirby Kites were also used, along with other types of glider, to assess the ability of the Chain Home radar system to detect aircraft largely constructed of wood. These tests carried out over the English Channel were successful in showing that even gliders with very little metallic content could be detected, though the strength of return depended on how much metal was on board. After use by the Glider Training Schools the surviving Kirby Kites were passed to the Air Training Corps. Seven complete Kirby Kites survive, plus another that has no wings. New wings are being built for this Kite.

Operators

United Kingdom

Royal Air Force

No 1 Glider Training School

Air Training Corps

Variants

T.6 Kite

the initial re-design of the Grunau Baby. Twenty-five built.

T.23 Kite 1A

Improved T.6 developed after World War II. One built.

Type 23A

A planned development of the T.23, with a new straight wing with 1° dihedral.

T.26 Kite 2

The final extrapolation, in 1946-7, of the Kite series with a completely different wing, enclosed cockpit and other detailed refinements.

T.26 Kite 2A

Modified wash-out at the wing-tips.

T.26 Kite 2B

As for the 2A, with air-brakes instead of spoilers.

Specifications (T.6 Kite 1)

Data from The World's Sailplanes:Die Segelflugzeuge der Welt:Les Planeurs du Monde

General characteristics

• Crew: 1
• Length: 20 ft 4 in (6.2 m)
• Wingspan: 46 ft 7 in (14.2 m)
• Wing area: 156.0 sq ft (14.49 m²)
• Aspect ratio: 13
• Airfoil: Göttingen 535
• Empty weight: 310 lb (140.5 kg) equipped
• Max takeoff weight: 495 lb (224.5 kg)

Performance

• Stall speed: 31 mph; 27 kn (50 km/h)
• Never exceed speed: 70 mph; 61 kn (113 km/h)
  
• Aerotow speed: 97 mph (156.1 km/h; 84.3 kn)
• Winch launch speed: 80 mph (128.7 km/h; 69.5 kn)
• G limits: +6
• Rate of sink: 154 ft/min (0.78 m/s) at 34 mph (54.7 km/h; 29.5 kn)
• Lift-to-drag: 21 at 40 mph (64.4 km/h; 34.8 kn)
• Wing loading: 3.2 lb/sq ft (15.5 kg/m²)