Starting lineup

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

In sports, a starting lineup is an official list of the set of players who will actively participate in the event when the game begins.[1] The players in the starting lineup are commonly referred to as starters, whereas the others are substitutes or bench players.

The starters are commonly the best players on the team at their respective positions. Consequently, there is often a bit of prestige that is associated with being a starter. This is particularly true in sport with limited substitutions like baseball or soccer. In both baseball and basketball, it is common for players' positions to be denoted by a number as well as by a name. In that instance, the associated number is used as well. If a common abbreviation is known, the abbreviation is listed after the associated number.

Starting lineup in specific sports

American football

In American football since the 1950s, most upper level teams use a three-platoon system, each with its own starting lineup. The starting lineups for offense and defense, each with eleven players, typically get the most attention. The starting lineups are defined as the eleven players who take the first offensive or defensive play from scrimmage of a given game. (An offensive player does not have to be on the team that gets possession first to be considered a starter, nor does a defensive player have to be on the team that does not; the first play from scrimmage after the first change of possession counts as well.) The third platoon, special teams, in modern times is composed mostly of backup and reserve players from the offensive or defensive platoons, with the exception of the placekicker or punter; the players who, for instance, take part in the opening kickoff are typically not considered starters.

Offense: The offensive lineup is heavily restricted by rules that have been adopted over the course of the game's development. Several positions are mandatory and must appear in any lineup, starting or otherwise. Others can be used or unused at the discretion of a team's coach, provided that no more than 11 players are on the field at any given time.

  1. QB -- Quarterback—Effectively mandatory.
  2. RB -- Running back—In a standard formation, there are two, the halfback and the fullback. Both positions are optional.
  3. C -- Center—Mandatory.
  4. LG, RG—Left and right guards on either side of the center. Mandatory.
  5. LT, RT—Left and right tackles on either end of the five man offensive line. Mandatory.
  6. TE -- Tight end. Optional, although either a tight end or a wide receiver must be on each end of the line of scrimmage. A standard formation has a tight end on one (usually the right) end and a wide receiver (split end) on the left.
  7. WR -- Wide receiver—Optional, but universally used in most starting lineups, except for at the lowest youth levels (where the forward pass is an unlearned skill). A wide receiver can be a flanker (outside the tight end) or slotback (inside a split end) lined up behind the line of scrimmage, or a split end on the end of the line. A standard lineup has two wide receivers, one flanker and one split end.

There is some variation; for instance, teams that rely more on passing may not use a fullback and start three wide receivers (typically a flanker, slotback and split end).

Defense: In recent history the 4-3 defense (4 defensive linemen plus 3 linebackers) formation has been standard among college and professional squads. However, the 3-4 (3 defensive linemen plus 4 linebackers) formation is becoming more popular among professional and NCAA Division I teams. Unlike offenses, defenses have no restrictions on positions, and the standard lineups have developed largely through tradition, experimentation, trial and error.

  1. DT—Depending on formation a team may have up to two defensive tackles. If there is only one he is called the Nose Tackle (NT)
  2. DE—A team has two defensive ends
  3. LB—A team can start three or four linebackers based on formation
  4. SS -- Strong safety
  5. FS -- Free safety
  6. CB—Teams usually start two cornerbacks

Special Teams:

  1. K -- Kicker
  2. P -- Punter
  3. PR -- Punt returner
  4. KR -- Kick returner
  5. LS -- Long snapper

The National Football League counts how many times each player takes the first snap of the game.[citation needed] This statistic reflects offense and defense only, not special teams. (Every game starts with a kickoff, which would be a special teams play.) A player gets credited with only one start if he should happen to be on both the offensive and defensive starting lineups (as has happened several times in recent years with Troy Brown of the New England Patriots, who played both wide receiver and defensive back.) Yet, this is not the official starting lineup. The list of players to start the game is usually determined by the head coach of the franchise and not the league.

In American college football, the official record of the game includes a "Game Participation" chart which shows the starting lineups and the other participants. The starting lineups reflect the two teams' offenses and defenses, not the kickoff teams.

Association football

A starting line-up in Association football consists of 11 players, with 1 designated goalkeeper. All other positions are optional, and teams can vary the player formations they use.

The formation are often described using the numbers of defenders, midfielders and striker/attackers used. For example, a commonly used formation is 4-4-2, which means there are 4 defenders, 4 midfielders and 2 strikers.[2]

Some formations may list 4 numbers, which usually differentiates between defensive and attacking midfielders, e.g. 4-2-3-1 would mean 4 defenders, 2 defensive midfielders, 3 attacking midfielders, and 1 striker.

Australian rules football

In Australian rules football, a team starts with eighteen players on the field. The traditional positions are as listed below, however in modern football the players are organised into three main groups, forwards, midfielders and defenders, each consisting of between four and eight players. Only four midfielders from each team are allowed to start inside the centre square, the other 14 players can start anywhere on the field.

Baseball

The starting lineup in baseball comprises either nine or ten players. In the National League of Major League Baseball and the Central League of Nippon Professional Baseball, there are nine players in the starting lineup and all players bat. American League (MLB) and Pacific League (NPB) teams have the option of using a designated hitter (DH) in place of the pitcher in the batting order. The DH does not play when the team is on defense.

  1. P – Pitcher
  2. C – Catcher
  3. 1B – First baseman
  4. 2B – Second baseman
  5. 3B – Third baseman
  6. SS – Shortstop
  7. LF – Left fielder
  8. CF – Center fielder
  9. RF – Right fielder
  10. DH – Designated hitter

In softball, the tenth position is an additional outfielder.

Basketball

In the National Basketball Association, two starting players are traditionally announced as guards, two as forwards, and one as a center. However, technically the rules merely stipulate that a starting lineup, along with a list of substitutes, must be indicated at least ten minutes before the game. A captain and optionally a co-captain must also be designated. When pre-game technical fouls are committed, only designated starters can be chosen to shoot any resulting free throws.[3]

The various positions are not mentioned anywhere in the official NBA rule book, and most players play more than one position.

The starting lineup on a basketball team usually comprises five positions and is called the 2-1-2 lineup:

  1. PG – Point guard
  2. SG – Shooting guard
  3. SF – Small forward
  4. PF – Power forward
  5. C – Center

In American college basketball, a starting lineup is announced for each team before the game. Starting players are designated as either centers, forwards, or guards. A team can name at most one center, but otherwise any combination of positions is allowable, as long as five players are named. Lineups of three guards, one forward, and one center, or of three guards and two forwards, are the most common alternate lineups.

Canadian football

In Canadian football, a team starts with 12 players on offence, 12 players on defence, and a special teams squad of 12 players for punts, kickoffs, and extra point attempts. As in American football, most of the special teams players are starters or bench players for offence or defence.

Because of substantial differences between the two codes—most notably the larger field and only having three downs to advance the ball 10 yards instead of four—offensive formations are somewhat different in the Canadian game. Most notably, tight ends are almost completely absent in Canada.

Offence
  1. QB — Quarterback—Explicitly mandatory until 2009; effectively mandatory since then.
  2. RB — Running back. Optional, but almost universally used, specially in a starting lineup. Note that the term halfback in Canada refers to a defensive position and is not used in regard to a running back.
  3. FB — Fullback. Optional.
  4. C — Centre. Mandatory.
  5. LG, RG — Left and right guards on either side of the centre. Mandatory.
  6. LT, RT — Left and right tackles on either end of the five-man offensive line. Mandatory.
  7. SB — Slotback, a similar position to the wide receiver (in fact, in the American game a slotback is considered a type of wide receiver), but lines up closer to the interior linemen and just off the line of scrimmage.
  8. WR — Wide receiver. Canadian football typically does not use tight ends, and so wide receivers are almost always split ends.
Defence

Defences are broadly similar to those in the U.S., with the extra player used as a defensive back. Since most of the positions are essentially identical to those in American football, only the main differences will be listed here.

  1. S — Safety, plays mainly deep pass support. Roughly corresponds to the "free safety" in the American game.
  2. DH — Defensive halfback(s), generally assigned to cover the slotback(s) when in man-to-man coverage. Most formations will use two halfbacks. Roughly corresponds to the "strong safety" in the American game.
Special teams

Positions generally similar to those in the U.S.

Gaelic football & hurling

Gaelic football and hurling, as well as ladies' Gaelic football and camogie, use the same starting lineup.[4] Teams consist of one goalkeeper and fourteen outfield players (underage teams may play 13-a-side, omitting the full back and full forward positions). Teams lineup in six lines, with the goalkeeper furthest back and the full-forward line closest to the opposing team's goal. Players play on the left or right of the field looking in the direction they are attacking. Position numbering is fixed and positions are set up so that every attacker has a corresponding defender: for example, a right corner forward (jersey number 13) will be marked by a left corner back (4). Players sometimes swap positions during a match and there are sometimes tactical variations in formation, such as dropping one of the six forwards back to provide a third midfielder. Up to five substitutions are allowed during normal time (and another three if there is extra time), from a bench of 9 or sometimes 11 substitutions; substitutions are not numbered in any particular order.

  1. Goalkeeper (jersey number 1)
  2. Right corner back (2) -- full back (3) -- left corner back (4)
  3. Right half (or wing) back (5) -- centre back (6) -- left half back (7)
  4. Two midfielders (or centre-fielders) (8, 9)
  5. Right half (or wing) forward (10) -- centre (centre half) forward (11) -- left half forward (12)
  6. Right corner forward (13) -- full forward (14) -- left corner forward (15)

Hurling & camogie

The starting lineup in hurling or camogie is the same as that for Gaelic football.

Ice hockey

In ice hockey, a team starts out with six players on the ice:

The starting forwards are typically known as the top line or first line, as most professional teams rotate four distinct three-man forward lines and three defense pairings.

Lacrosse

The starting lineup in field lacrosse comprises ten players: 3 Attackmen, 3 Defensemen, 3 Midfielders, and 1 Goalkeeper. A team may start a Long-Stick Midfielder for a defensive advantage. A team may have a player reserved exclusively to take face-offs, known as a FOGO.

  1. A – Attackmen
  2. D – Defensemen
  3. M – Midfielder
  4. G – Goalkeeper
  5. LSM – Long-stick Midfielder
  6. FOGO – Face-Off Specialist "Face-Off, Get-Off"

Netball

In netball, a team starts with seven players on the court:

  1. GS – Goal shooter
  2. GA – Goal attack
  3. WA – Wing attack
  4. C – Centre
  5. WD – Wing defence
  6. GD – Goal defence
  7. GK – Goal keeper

Rugby League

A Rugby league football starting lineups is

  1. 1 – Fullback
  2. 2 and 5 – Wingers
  3. 3 and 4 – Centres
  4. 6 – Stand-off
  5. 7 – Halfback
  6. 8 and 10 – Front row forwards
  7. 9 – Hooker
  8. 11 and 12 – Second row forwards
  9. 13 – Lock forward

Rugby Union

Rugby union starting lineups consist of:

  1. Two Props – 1 (loosehead) and 3 (tighthead)
  2. Hooker – 2
  3. Two Locks – 4 and 5
  4. Two Flankers – 6 and 7
  5. Number Eight – 8
  6. Scrum-Half – 9
  7. Fly-Half – 10
  8. Two Wings – 11 and 14
  9. Two Centres – 12 and 13
  10. Fullback – 15

Volleyball

The starting lineup for a volleyball match typically includes:

  1. One setter
  2. Two outside hitters
  3. One opposite hitter
  4. Two middle blockers

Variations do exist – sometimes there will be two setters, or three outside hitters without a true opposite. Though the libero is typically announced with the starting lineup, he or she is not considered to be part of it, as the libero will replace one of the above players (typically a middle blocker, as teams will want to split their middle blockers, with one beginning in the front row) before the first rally.

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. http://news.bbc.co.uk/sport1/hi/football/rules_and_equipment/4197420.stm
  3. [1]
  4. Lua error in package.lua at line 80: module 'strict' not found.