Stearic acid

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Stearic acid[1]
Skeletal formula of stearic acid
Ball-and-stick model of stearic acid
Stearic acid
Names
IUPAC name
Octadecanoic acid
Other names
Identifiers
57-11-4 YesY
ChEMBL ChEMBL46403 N
ChemSpider 5091 N
DrugBank DB03193 YesY
EC Number 200-313-4
3377
Jmol 3D model Interactive image
PubChem 5281
RTECS number WI2800000
  • CCCCCCCCCCCCCCCCCC(=O)O
Properties
C18H36O2
Molar mass 284.48 g·mol−1
Appearance White solid
Odor Pungent, oily
Density 0.9408 g/cm3 (20 °C)[2]
0.847 g/cm3 (70 °C)
Melting point 69.3 °C (156.7 °F; 342.4 K) [2]
Boiling point 361 °C (682 °F; 634 K)
decomposes
232 °C (450 °F; 505 K)
at 15 mmHg[2]
0.003 g/L (20 °C)[3]
0.34 g/L (25 °C)[4]
1 g/L (37 °C)[5]
Solubility Soluble in alkyl acetates, alcohols, HCOOCH3, phenyls, CS2, CCl4[4]
Solubility in dichloromethane 3.58 g/100 g (25 °C)
8.85 g/100 g (30 °C)
18.3 g/100 g (35 °C)[4]
Solubility in ethanol 0.9 g/100 mL (10 °C)
2 g/100 mL (20 °C)
4.5 g/100 mL (30 °C)
13.8 g/100 mL (40 °C)[5]
Solubility in acetone 4.96 g/100 g[5]
Solubility in chloroform 18.4 g/100 g[5]
Solubility in toluene 15.75 g/100 g[5]
Vapor pressure 0.01 kPa (158 °C)[2]
0.46 kPa (200 °C)
16.9 kPa (300 °C)[6]
Thermal conductivity 0.173 W/m·K (70 °C)
0.166 W/m·K (100 °C)[7]
1.4299 (80 °C)[2]
Structure
B-form = Monoclinic[8]
B-form = P21/a[8]
B-form = Cs
2h
[8]
a = 5.591 Å, b = 7.404 Å, c = 49.38 Å (B-form)[8]
α = 90°, β = 117.37°, γ = 90°
Thermochemistry
501.5 J/mol·K[2][6]
435.6 J/mol·K[2]
−947.7 kJ/mol[2]
11290.79 kJ/mol[6]
Vapor pressure {{{value}}}
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Stearic acid (STAIR-ik or STEER-ik) is a saturated fatty acid with an 18-carbon chain and has the IUPAC name octadecanoic acid. It is a waxy solid and its chemical formula is C17H35CO2H. Its name comes from the Greek word στέαρ "stéar", which means tallow. The salts and esters of stearic acid are called stearates. As its ester, stearic acid is one of the most common saturated fatty acids found in nature following palmitic acid.[9] The triglyceride derived from three molecules of stearic acid is called stearin.

Production

Stearic acid is obtained from fats and oils by the saponification of the triglycerides using hot water (above 200 °C). The resulting mixture is then distilled.[3] Commercial stearic acid is often a mixture of stearic and palmitic acids, although purified stearic acid is available.

Fats and oils rich in stearic acid are more abundant in animal fat (up to 30%) than in vegetable fat (typically <5%). The important exceptions are cocoa butter and shea butter, where the stearic acid content (as a triglyceride) is 28–45%.[10]

In terms of its biosynthesis, stearic acid is produced from carbohydrates via the fatty acid synthesis machinery wherein acetyl-CoA contributes two-carbon building blocks.

Uses

In general, the applications of stearic acid exploit its bifunctional character, with a polar head group that can be attached to metal cations and a nonpolar chain that confers solubility in organic solvents. The combination leads to uses as a surfactant and softening agent. Stearic acid undergoes the typical reactions of saturated carboxylic acids, a notable one being reduction to stearyl alcohol, and esterification with a range of alcohols. This is used in a large range of manufactures, from simple to complex electronic devices.

Soaps, cosmetics, detergents

Stearic acid is mainly used in the production of detergents, soaps, and cosmetics such as shampoos and shaving cream products. Soaps are not made directly from stearic acid, but indirectly by saponification of triglycerides consisting of stearic acid esters. Esters of stearic acid with ethylene glycol, glycol stearate, and glycol distearate are used to produce a pearly effect in shampoos, soaps, and other cosmetic products. They are added to the product in molten form and allowed to crystallize under controlled conditions. Detergents are obtained from amides and quaternary alkylammonium derivatives of stearic acid.

Lubricants, softening and release agents

In view of the soft texture of the sodium salt, which is the main component of soap, other salts are also useful for their lubricating properties. Lithium stearate is an important component of grease. The stearate salts of zinc, calcium, cadmium, and lead are used to soften PVC. Stearic acid is used along with castor oil for preparing softeners in textile sizing. They are heated and mixed with caustic potash or caustic soda. Related salts are also commonly used as release agents, e.g. in the production of automobile tires.

Niche uses

Being inexpensively available and chemically benign, stearic acid finds many niche applications, for example, in making plaster castings from a plaster piece mold or waste mold and in making the mold from a shellacked clay original. In this use, powdered stearic acid is mixed in water and the suspension is brushed onto the surface to be parted after casting. This reacts with the calcium in the plaster to form a thin layer of calcium stearate, which functions as a release agent. When reacted with zinc it forms zinc stearate, which is used as a lubricant for playing cards (fanning powder) to ensure a smooth motion when fanning. In compressed confections, it is used as a lubricant to keep the tablet from sticking to the die.

Stearic acid is also used as a negative plate additive in the manufacture of lead-acid batteries. It is added at the rate of 0.6 g per kg of the oxide while preparing the paste.[11] It is believed to enhance the hydrophobicity of the negative plate, particularly during dry-charging process. It also reduces the extension of oxidation of the freshly formed lead (negative active material) when the plates are kept for drying in the open atmosphere after the process of tank formation. As a consequence, the charging time of a dry uncharged battery during initial filling and charging (IFC) is comparatively lower, as compared to a battery assembled with plates which do not contain stearic acid additive.

Fatty acids are classic components of candle-making. Stearic acid is used along with simple sugar or corn syrup as a hardener in candies.

Stearic acid is used to produce dietary supplements.

In fireworks, stearic acid is often used to coat metal powders such as aluminium and iron. This prevents oxidation, allowing compositions to be stored for a longer period of time.

Stearic acid is a common lubricant during injection molding and pressing of ceramic powders.[12] It is also used as a mold release for foam latex that is baked in stone molds.

Metabolism

An isotope labeling study in humans[13] concluded that the fraction of dietary stearic acid that oxidatively desaturates to oleic acid is 2.4 times higher than the fraction of palmitic acid analogously converted to palmitoleic acid. Also, stearic acid is less likely to be incorporated into cholesterol esters. In epidemiologic and clinical studies, stearic acid was found to be associated with lowered LDL cholesterol in comparison with other saturated fatty acids.[14]

These findings may indicate that stearic acid is healthier than other saturated fatty acids.

Stearic acid is part of a control mechanism for mitochondria. There is a transferrin receptor that binds stearic acid, giving signaling function and has been tested in the HeLa human cancer cell line. Flies that exhibit Parkinson's like symptoms resulting from mitochondrial defect improved and survived much longer when fed stearic acid.[15]

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 David J. Anneken, Sabine Both, Ralf Christoph, Georg Fieg, Udo Steinberner, Alfred Westfechtel "Fatty Acids" in Ullmann's Encyclopedia of Industrial Chemistry 2006, Wiley-VCH, Weinheim. doi:10.1002/14356007.a10_245.pub2
  4. 4.0 4.1 4.2 Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 5.2 5.3 5.4 Lua error in package.lua at line 80: module 'strict' not found.
  6. 6.0 6.1 6.2 Octadecanoic acid in Linstrom, P.J.; Mallard, W.G. (eds.) NIST Chemistry WebBook, NIST Standard Reference Database Number 69. National Institute of Standards and Technology, Gaithersburg MD. http://webbook.nist.gov (retrieved 2014-06-15)
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. 8.0 8.1 8.2 8.3 Lua error in package.lua at line 80: module 'strict' not found.
  9. Gunstone, F. D., John L. Harwood, and Albert J. Dijkstra "The Lipid Handbook with Cd-Rom. 3rd ed. Boca Raton: CRC Press, 2007. ISBN 0849396883 | ISBN 978-0849396885
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. L.T. Lam et al. Journal of Power Sources 73 (1998) 36–46
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Deniz Senyilmaz, Sam Virtue, Xiaojun Xu, Chong Yew Tan, Julian L. Griffin, Aubry K. Miller, Antonio Vidal-Puig, Aurelio A. Teleman. Regulation of mitochondrial morphology and function by stearoylation of TFR1. Nature, 2015; DOI: 10.1038/nature14601

External links