Strong focusing

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Sextupole electromagnet as used within the storage ring of the Australian Synchrotron to focus and steer the electron beam

In accelerator physics strong focusing or alternating-gradient focusing is the principle that the net effect on a particle beam of charged particles passing through alternating field gradients is to make the beam converge. By contrast "Weak focusing" is the principle that nearby circles, described by charged particles moving in a uniform magnetic field, only intersect once per revolution.

Earnshaw's theorem shows that simultaneous focusing in two directions at once is impossible. However, ridged poles of a cyclotron or two or more spaced quadrupole magnets (arranged in quadrature[disambiguation needed]) alternately focus horizontally and vertically.[1][2]

Strong focusing was first conceived by Nicholas Christofilos in 1949 but not published (Christofilos opted instead to patent his idea),[3] In 1952, the strong focusing principle was independently developed by Ernest Courant, M. Stanley Livingston, Hartland Snyder and J. Blewett at Brookhaven National Laboratory,[4] [5] who later acknowledged the priority of Christofilos' idea.[6] The advantages of strong focusing were then quickly realised, and deployed on the Alternating Gradient Synchrotron.

Courant and Snyder found that the net effect of alternating the field gradient was that both the vertical and horizontal focusing of protons could be made strong at the same time, allowing tight control of proton paths in the machine. This increased beam intensity while reducing the overall construction cost of a more powerful accelerator. The theory revolutionised cyclotron design, and permitted very high field strengths to be employed, while massively reducing the size of the magnets needed by minimising the size of the beam. Most particle accelerators today utilise the strong focusing principle.

Multipole magnets

Quadrupole electromagnet from the storage ring of the Australian Synchrotron serves much the same purpose as the sextupole magnets

Modern systems often use multipole magnets, such as quadrupole and sextupole magnets, to focus the beam down, as magnets give a more powerful deflection effect than earlier electrostatic systems at high beam kinetic energies. The multipole magnets refocus the beam after each deflection section, as deflection sections have a defocusing effect that can be countered with a convergent magnet 'lens'.

This can be shown schematically as a sequence of divergent and convergent lenses. The quadrupoles are often laid out in what are called FODO patterns (where F focusses vertically and defocusses horizontally, and D focusses horizontally and defocusses vertically and O is a space or deflection magnet). Following the beam particles in their trajectories through the focusing arrangement, an oscillating pattern would be seen.

Mathematical modelling

The action upon a set of charged particles by a set of linear magnets (i.e. only dipoles, quadrupoles and the field-free drift regions between them) can be expressed as matrices which can be multiplied together to give their net effect, using ray transfer matrix analysis.[7] Higher-order terms such as sextupoles, octupoles etc. may be treated by a variety of methods, depending on the phenomena of interest.

See also

External links

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. The Alternating Gradient Concept
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Beam focusing