Sutton Coldfield rail crash

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Sutton Coldfield train crash
Date 23 January 1955
Time 16:13
Location Sutton Coldfield, Warwickshire
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Country England
Rail line Cross-City Line
Cause Overspeed on curve
Statistics
Trains 1
Passengers ~300
Deaths 17
Injuries 25
List of UK rail accidents by year

The Sutton Coldfield train crash took place at about 16:13 on 23 January 1955 in Sutton Coldfield, a town now within the City of Birmingham, when an express passenger train traveling from York to Bristol, England, derailed due to excessive speed on a sharp curve.

Accident circumstances

Headed by a LMS Class 5 4-6-0 steam locomotive No 45274, the 12:15 York to Bristol express, consisting of ten carriages, approached Sutton Coldfield railway station at about 55-60 mph (88-96 km/h) — twice the permitted speed of 30 mph. When it reached the sharp curve immediately before the station, the train derailed, colliding with the platforms.

The carriages, engine, and station buildings were severely damaged. The first carriage was crushed between the engine and the second carriage. The fourth carriage was knocked into the air causing it to drag along the station roof, damaging both the roof and the platforms to either side. Seventeen people, including the train crew, were killed and 25 injured.

The train had been diverted away from its usual route into Birmingham via Tamworth because of engineering work. The regular driver did not know the diversionary route via Sutton Coldfield, so another driver, fully conversant with it, had joined him at Burton-on-Trent to 'conduct' him over this section. However, the regular driver, complaining that the rough riding of the engine was tiring him, left the footplate and took a seat in the train, leaving the conductor driver in charge. This action was later criticised by the Inspecting Officer who commented that, even though he did not know the route, the safety of the train was still his responsibility.

Emergency response

The number of casualties was prevented from rising as a result of the actions of two local people who rushed up the railway line to stop a train heading towards the crash site. Two railway employees also raised the alarm to other stations, changed the signals to danger and placed detonators on the tracks to warn oncoming trains. One of the two had been injured and shocked by the accident, and both were rewarded with gold watches for their work.

The scene was attended to by a mobile surgical unit from Birmingham Accident Hospital as well as 40 additional ambulances from surrounding districts. R.A.F. servicemen from Whitehouse Common provided aid to the emergency services.

Possible causes

Although the excessive speed was the major factor in the accident, the exact cause was never fully established. The accident occurred in broad daylight and the driver knew the line well. There was no evidence of mechanical failure on the train. The driver and fireman died in the locomotive, so the reason for the excessive speed was never established. Investigators identified several factors that could have contributed to the excessive speed:

  • The train was running late and making up time.
  • There was a gradient to climb after the station which was best approached at full speed.
  • The steam locomotive (like most at the time) was not fitted with a speedometer.
  • The engine was riding roughly, which may have contributed to the driver's misjudging the speed.

It seems therefore that the driver knew he was exceeding the speed limit but did not realise the extent of the danger (similar to the Salisbury rail crash of 1906).

Consequences

Following this accident, lineside speed restriction signs were universally adopted; previously there had been no visual reminder to the driver of speed restrictions on many routes. The Inspector also suggested the use of speed recorders, as in France, but this was not adopted.

Similar accidents

See also

References

  • Lua error in package.lua at line 80: module 'strict' not found.

External links