Hail spike
Lua error in package.lua at line 80: module 'strict' not found.
A hail spike or three body scatter spike (TBSS) is an artifact on a weather radar display indicative of large hail. They are identified by a spike of weak reflectivity echoes that extend out from a thunderstorm, and away from the radar site.
Contents
Cause
Generally known as hail spikes, these are the result of energy from the radar hitting hail, or very heavy rain, and being reflected to the ground, where they reflect back to the hail and then to the radar as in the image on the left.[1] This results in the radar picking up the energy from the multiple path at a later time than the energy that came back directly from the hail to the radar. Both are however on the same radial angle from the radar as the antenna did not have the time to turn significantly.
The multipath echoes are then analyzed on the radar display as echoes extending in a radial direction behind the actual location of the hail/heavy rain core. The loss of energy by due to multiple reflections means weaker return echoes. The hail spike region has thus comparatively quite weaker echoes than the echoes directly from the hail or heavy rain core.[1]
Since hail cores are most intense at higher elevations, hail spikes usually appear at the levels aloft that accompany the most intense hail. Because of this, hail spikes are usually not seen at lower elevations.[1] Another restriction to detection is that the signal of the radar beam has to do multiple reflections, each time weakening it. So hail spikes are usually noticeable only in extremely large hailstone cases.[2]
Multiple TBSS Signatures
In rare cases more than one hail spike has been documented with a single storm in one volume scan.[3] This indicates that more than one hail core exists in the same storm and far enough apart that each core can be sampled by the radar individually.
Use in forecasting
Because of their observed accuracy in indicating large hail aloft, TBSS's are used operationally by the National Weather Service to identify thunderstorms that could likely produce large, severe hail. This would warrant the issuance of a severe thunderstorm warning or mention of large hail in a tornado warning.
See also
Related link
- Convective storm detection
- Severe weather terminology (United States)
- Severe weather terminology (Canada)
External links
- Three-Body Scatter Spike course by the National Weather Service
