Tom-tom drum

"Tom toms" redirects here. For the musical group, see Tommy & the Tom Toms.

The drum kit

1 Bass drum | 2 Floor tom | 3 Snare drum 4 Hanging toms | 5 Hi-hat | 6 Crash cymbal 7 Ride cymbal | 8 Splash cymbal | 9 China cymbal

Not shown

Sizzle cymbal | Swish cymbal | Crash/ride cymbal Cowbell | Wood block | Tambourine Rototom | Octoban | Temple block Gong | Triangle

See also

Drum hardware | Drum stick | Traps case

A tom-tom drum (which is distinct from a tam-tam, a gong), also known as a tenor drum l, is a cylindrical drum with no snares. The name came originally from the Anglo-Indian and Sinhala. The tom-tom drum was added to the drum kit in the early part of the 20th century. Most toms range in size between 6 and 20 inches (15 and 51 cm) in diameter, though floor toms can go as large as 24 inches (61 cm).

Design history

The first drum kit tom-toms had no rims; the heads were tacked to the shell.

As major drum manufacturers began to offer tunable tom-toms with hoops and tuning lugs, a 12 in (30 cm) drum 8 inches (20 cm) deep became standard, mounted on the left side of the bass drum. Later a 16 in (41 cm) drum (16 inches deep) mounted on three legs (a floor tom) was added. Finally, a second drum was mounted on the right of the bass drum, a 13 in (33 cm) diameter drum 9 inches (23 cm) deep. Together with a 14 in (36 cm) snare drum and a bass drum of varying size, these three made up the standard kit of five drums for most of the second half of the 20th century.

Later, the mounted tom-toms, known as hanging toms or rack toms, were deepened by one inch each, these sizes being called power toms. Extra-deep hanging toms, known as cannon depth, never achieved popularity. All these were double-headed.

Modern tom-toms

12 in × 8 in (30 cm × 20 cm) rack tom mounted to a stand

A wide variety of configurations are commonly available and in use at all levels from advanced student kits upwards. Most toms range in size between 6 and 20 inches (15 and 51 cm) in diameter, though floor toms can go as large as 24 inches (61 cm).

Classic rack tom setups

Standard tom-tom diameters

• The basic rock configuration consists of 12" and 13" hanging toms, and a 16" floor tom
• The basic fusion configuration refers to a set-up that has 10", 12" and 14" diameter toms, as opposed to a standard rock configuration which is 12", 13" and 16". Note that these terms do not imply drum depths, so for example, the 14" in a fusion setup could have depth 10, 11, 12, or could be a 14×14 floor tom. These terms "fusion" and "rock" are really marketing terms invented by drum manufacturing companies, and there is not an absolute definition for them; more a case of an accepted norm.

In the 50s and early 60s, it was common to have only a single hanging tom (a 13") and a single floor tom (16").

File:TomTom.JPG

Tom-toms mounted on a bass drum

Standard tom-tom depths

• The standard depth rack toms popular in the 1950-1980s were 12×8 and 13×9. This "classic" configuration is still popular among many players.

• "FAST" sizes are 10×8, 12×9, 13×10, etc. DW use the marketing term "FAST" for these sizes, but they are not unique to DW, and are widely popular sizes with all drum manufacturers.

• New Standard - 10×9, 12×10, 13×11, etc. i. e. The "New standard" sizes are 2" deeper than what was considered "standard" in the 50s. However, despite the term, these are becoming less "standard" in favour of "FAST" sizes.

• Power toms are one inch deeper than standard, so standard sizes are 10×9 or 10×10, 12×11, 13×12. This depth overtook the classic setup in popularity during the 1980s.

• Square - 10×10, 12×12, 13×13, etc. Popular in the 80s and 90s but no longer popular.

• Hyperdrive - Shallow depths made popular initially by Tama: 10×6.5, 12×7, 13×7.5, etc.

Variations

Single-headed tom-toms

In the 1970s, Alex Van Halen simply removed the bottom heads from his hanging toms to create concert toms

Single-headed tom-toms (also known as concert toms) have also been used in drumkits, though their use has fallen off in popularity since the 1970s. Concert toms have a single head and a shell slightly shallower than the corresponding double-headed tom. Phil Collins still uses four single-headed rack-mount toms and two floor toms (Gretsch) in his setup. They are generally easier to tune as they have no bottom head to adjust.

Recently the term concert tom has also been used to describe double- or single-headed tom-tom drums designed for use in a concert band rather than in a drumkit.

Rototoms

Main article: rototom

Rototoms have no shell at all, just a single head and a steel frame. Unlike most other drums, they have a variable definite pitch and some composers write for them as a tuned instrument, demanding specific notes. They can be tuned quickly by rotating the head. Since the head rotates on a thread, this raises or lowers the head relative to the rim of the drum and so increases or decreases the tension in the head.

Gong bass drum

Main article: gong bass drum

A gong bass drum (also known as "gong drum"), is a large, single-headed tom often sized at 20 in (51 cm) or 22 in (56 cm), with the drumhead being 2 in (5.1 cm) larger than the shell. The sound produced is similar to a bass drum, though it is more open and has longer sustain. They can be mounted with standard floor tom legs, though many drummers mount them at an angle next to the floor tom(s). Notable users include Neil Peart, Stewart Copeland, Bill Bruford, Simon Phillips, Jason Bittner, Mike Portnoy and Dom Howard.

Floor tom

Main article: floor tom

A floor tom is a double-skin drum, most often but not always as deep as its diameter, traditionally mounted on three legs and to the drummer's right for a right-handed drummer. It is normally the deepest-toned drum played by sticks in the kit, above the bass drum but below all others, and the most resonant, more so than even the bass drum.

Construction and manufacture

Typically a tom consists of a shell, chromed or plated metal hardware and head.

Shell depth standards vary according to the era of manufacture and the drum style. Tom-toms are typically made in diameters of: 6 in (15 cm), 8 in (20 cm), 10 in (25 cm), 12 in (30 cm), 13 in (33 cm), 14 in (36 cm), 15 in (38 cm), 16 in (41 cm) and 18 in (46 cm), with heads to fit.

Tom-toms can be fitted with an adjustable mounting for a floor stand, or attachment to a bass drum or marching rig. They can be single- or double-headed.

Shell

A crucial factor in achieving superior tone quality and insuring durability, especially with wood, is the creation of perfectly round shells and much research and development effort has been put into this manufacturing technology.

Shells are often constructed of 6–8 wood plies (often using different woods e. g. mahogany and falkata — birch or maple are commonly used for single-wood plies), solid wood (turned) or man-made materials (e. g. fibreglass, pressed steel, acrylic glass, resin-composite). Wood or composite shells can be finished by laminating in plastic in a large variety of colours and effects (e. g. sparkle or polychromatic); natural wood may be stained or left natural and painted with clear lacquer. Steel is usually chromed, fibreglass self-coloured and acrylic glass tinted or clear.

Hardware

A shell-mounted clamp attached to ball-head floor stand.

Main article: Drum hardware

One or two cast or pressed metal rims attach by threaded tension rods or lugs to nut boxes bolted onto the shell and hold the heads onto the bearing edges of the shell. The tension rod assembly needs to be precision-machined, cast and fitted to enable predictable and secure tuning without inhibiting resonance or introducing extra vibration. All components will be placed under great tension and experience added stresses from playing.

Mounting systems vary greatly, from a simple cast block on the shell which accepts and clamps to a rod attached to a clamp or holder to much more sophisticated arrangements where there is no attachment to the shell, instead a frame clamps to the tuning lugs.

Another sort of rod clamp system allows attachment of the drum to the tom holder without the need of a hole in the drum shell for the rod to pass through. The clamp is attached to the shell at the nodal point with two bolts so as to allow the shell to vibrate freely without degrading the shell's dynamic range and sustain. The nodal point is the location on a shell with the least amount of vibration allowing for the mount to have minimal effect on the resonance of the shell.

Some drummers use a snare stand to hold a tom, thus making it easier to position the tom.

Sound

Standard drum notation for (up to six) toms.

Audio samples

Component	Content	Audio (Ogg Vorbis)
Toms	8-inch rack tom	<phonos file="Tom drum 8 inch.ogg">59 KB</phonos>
	12-inch rack tom	<phonos file="Tom 12 inch.ogg">41 KB</phonos>
	Floor tom	<phonos file="Floor tom.ogg">39 KB</phonos>
See the Drums page at Wikimedia Commons for more