Tom Thumb (locomotive)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Tom Thumb
Tom thumb peter coopers iron horse 6092027.jpg
A 1927 replica of Tom Thumb, the first American-built steam locomotive
Type and origin
Power type Steam
Builder Peter Cooper
Build date 1830
Specifications
Configuration 2-2-0
Length Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value).
Height 12 ft 9 in (3.89 m)
Fuel type anthracite coal
Boiler 27 in × 66 in (690 mm × 1,680 mm)
dia × high
Cylinder size 5 in × 27 in (127 mm × 686 mm)
dia × stroke
Performance figures
Power output 1.4 hp (1.0 kW) horsepower[1]
Career
Operators Baltimore and Ohio Railroad

Tom Thumb was the first American-built steam locomotive used on a common-carrier railroad. Designed and built by Peter Cooper in 1830, it was designed to convince owners of the newly formed Baltimore and Ohio Railroad (B&O) to use steam engines. It is especially remembered as a participant in an impromptu race with a horse-drawn car, which the horse won after Tom Thumb suffered a mechanical failure. However, the demonstration was successful; and in the following year, the railroad committed to the use of steam locomotion and held trials for a working engine.[2]:11

Background

The first railroads were little more than tracks on roads: horses pulled wagons and carriages with their wheels modified to ride on the rails. Only when the development of the steam engine had progressed to the point where such an engine could be mounted on wheels could trains be moved by steam power. The first steam locomotives were built in England, the birthplace of steam power; the first locomotives in America were imported from England. Soon, however, Americans began to plan their own locomotives.[3]

Design and construction

Tom Thumb was designed by Peter Cooper as a four-wheel locomotive with a vertical boiler and vertically mounted cylinders that drove the wheels on one of the axles. The "design" was characterized by a host of improvisations. The boiler tubes were made from rifle barrels[2]:11 and a blower was mounted in the stack, driven by a belt to the powered axle.[2]:12 [4] The engine was fueled by anthracite coal.[5]

Cooper's interest in the railroad was by way of substantial real estate investment in what is now the Canton neighborhood of Baltimore. Success for the railroad was expected to increase the value of his holdings.[2]:11

Construction was carried out in the machine shop of George W. Johnson, where the 18-year-old James Millholland was apprenticed.[6] Millholland would later become a prominent locomotive designer in his own right.

Demonstration

The Tom Thumb replica in action.
1831 drawing of a locomotive (likely the "Tom Thumb") in Baltimore.

Testing was performed on the company's track between Baltimore and Ellicott Mills (now Ellicott City, Maryland). Two tracks had been constructed, which led the owners of Stockton and Stokes stagecoach company to challenge the locomotive to a race, and on August 28, 1830, the race was held[7][8][9] (but sources differ slightly on the date with variations including August 25[10] and September 28[11]). The challenge accepted, Tom Thumb was easily able to pull away from the horse until the belt slipped off the blower pulley. Without the blower, the boiler did not draw adequately and the locomotive lost power, allowing the horse to pass and win the race. Nonetheless, it was realized that the locomotive offered superior performance.[5][7][8]

Aftermath

Tom Thumb was not intended for revenue service, and was not preserved, though Cooper and others associated with the railroad's early days left descriptions which enabled the general dimensions and appearance to be worked out. In 1892, a wooden model was constructed by Major Joseph Pangborn, a western newspaperman and publicist, who also had models made of many other early locomotives.[12] In 1927 the B&O hosted a centennial exhibition near Baltimore, titled "Fair of the Iron Horse," and had a replica constructed for the exhibition.[12][13] This replica followed Pangborn's model and therefore differed considerably from the original, being somewhat larger and heavier, and considerably taller (note that the dimensions given above are those of the replica). Also, instead of the blower in the stack, a much larger blower was mounted on the platform to provide a forced draft, and the support frame of the cylinder and guides was considerably different.

The replica remains on display at the Baltimore and Ohio Railroad Museum. The museum lists the replica as operational, and the locomotive makes special appearances each year.[14]

See also

References

  1. ↑ http://www.1939nyworldsfair.com/worlds_fair/wf_tour/zone-6/RRP-tom-thumb.htm
  2. ↑ 2.0 2.1 2.2 2.3 Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ 7.0 7.1 Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ 8.0 8.1 Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ 12.0 12.1 Baltimore and Ohio Railroad Museum, Baltimore, MD. "History of the Museum." Accessed 2013-04-18.
  13. ↑ Maryland Historical Society, Baltimore, MD (2000). "The Fair of the Iron Horse." Accessed 2013-04-18.
  14. ↑ B&O Railroad Museum. "Collections: Tom Thumb." Accessed 2013-04-18.
  • Lua error in package.lua at line 80: module 'strict' not found.

Further reading

  • Lua error in package.lua at line 80: module 'strict' not found.
Retrieved from "https://infogalactic.com/w/index.php?title=Tom_Thumb_(locomotive)&oldid=2590898"