Toyota Comfort

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

"Toyota Crown Sedan" redirects here. For the unrelated executive car model sold under the Crown nameplate, see Toyota Crown.

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

For the unrelated purpose-built taxicab model sold in Hong Kong as the "Comfort Hybrid" since 2018, see Toyota JPN Taxi.
Toyota Comfort (XS10)
File:Toyota Comfort SG.jpg
Overview
Manufacturer Toyota
Also called Toyota Crown Comfort
Toyota Crown Sedan
Production December 1995–January 2018[1]
Assembly Japan: Susono, Shizuoka (Higashi Fuji plant)[2][3]
Body and chassis
Class Mid-size car
Body style 4-door notchback sedan
Layout Front-engine, rear-wheel-drive
Related Toyota Mark II (X80)
Powertrain
Engine
Transmission
Dimensions
Wheelbase
  • 2,680 mm (105.5 in)
  • 2,785 mm (109.6 in) (LWB)
Length
  • 4,590 mm (180.7 in)
  • 4,695 mm (184.8 in) (LWB)
Width 1,695 mm (66.7 in)
Height 1,525 mm (60.0 in)
Chronology
Predecessor
Successor Toyota JPN Taxi/Comfort Hybrid

The Toyota Comfort (Japanese: トヨタ・コンフォート Hepburn: Toyota Konfōto?) and the long-wheelbase Toyota Crown Comfort were a line of mid-size sedans produced by Toyota between 1995 and 2018. A platform derivative of the Toyota Mark II (X80), the Comfort was aimed at fleet buyers with a primary focus on taxicab operators.[5][6] A third model was released in 2001 as the 11th generation Crown Sedan (the first Crown Sedan not based on the normal Crown executive car) for the Japanese market only.[7]

Its main competitors were the Nissan Crew (discontinued in June 2009) and the Nissan Cedric Y31 (discontinued in 2015). Production of the Comfort ceased in January 2018, after more than 22 years in production, and it was subsequently replaced by the Toyota JPN Taxi which was launched at the 45th Tokyo Motor Show in October 2017.[1]:{{{3}}}[8]

Description

File:Toyota Crown Comfort, Denpasar.JPG
Toyota Crown Comfort (Indonesia)
File:Toyota Comfort Deluxe TSS13Y interior.jpg
Interior

The Comfort and Crown Comfort were released on December 19, 1995 as replacements for the base fleet versions of the Mark II and the larger Crown.[6]:{{{3}}} The Comfort was offered only in a five-seat configuration throughout the years, while early Crown Comfort models were offered with a split front bench in place of bucket seats. Five-seater Comforts could only be equipped with a floor-mounted gear lever, while six-seater models were paired with column shifters. A remote control rear passenger door, actuated by the driver through a series of mechanical linkages or a pneumatic system, is standard on taxi models in both Hong Kong and Japan.

Markets

According to a report in 2011, Toyota has sold 364,000 Comforts since 1995. The model, particularly its long-wheelbase variants, was popular among taxicab operators in Japan, Hong Kong, and Singapore. The short-wheelbase Comfort was commonly used for driver's education in Japan. Crown Comforts were also exported to Indonesia, where they were most notably operated by the Blue Bird Group, and Macau.[9]

In Singapore, the implementation of Euro IV emission requirements forced taxi companies to remove Crown Comforts from service in 2014.[10] Most units were scrapped but a handful were stripped of their drivetrains and donated to the healthcare industry for use in rehabilitation training.[11]

Awards

In October 2008, the Crown Comfort won the Good Design Award in the long life design award category.[12]:{{{3}}}

In 2010, the model was named by Akio Toyoda, the president of Toyota, as the winner of the “President’s Prize”: an internal, semi-official corporate award. The company explained: “The car itself is unspectacular but it is very important to Toyota. This is why Morizo chose the car for the first ‘Morizo award,’... the car can be driven over the years by everybody from beginners to experts. And this is the proof that the car is the symbol of Toyota's quality, durability and reliability”. Morizo is the driver name and blogging alter ego adopted by Mr. Toyoda, a motor sports enthusiast.[13]

Technical specifications

The Comfort uses MacPherson strut independent front suspension and a coil-sprung solid rear axle.[12] The earlier short-wheelbase Comforts were powered by either the 2L-TE diesel engine, 3S-FE/4S-FE gasoline engine, or a 3Y-PE LPG engine. Starting in 2008, they were only offered with the 1998 cc 1TR-FPE and 1TR-FE engine, producing 83 kW (113 PS) at 4,800 rpm, and 100 kW (134 hp; 136 PS) at 5,600 rpm respectively.[14]

The long-wheelbase Crown Comfort had more variety when it came to engine choices. Early export models to Hong Kong, Indonesia and Singapore offered 2L and 5L diesel engines, while domestic Japanese models received the 3Y-PE and 1G-GPE LPG engine only. Hong Kong eventually received the 3Y-PE engine a few years later, but Indonesia and Singapore only received diesel models. The 1G-GPE engine was phased out in 2001, and in 2007, the 3Y-PE model was phased out in favour of the new 1TR powered vehicles.

Some Super Deluxe and Crown Sedan models received the six-cylinder 1G-GPE initially and later the 1G-FE, the former of which was dropped after 2002, and the latter after 2007; mild hybrid drivetrains with the 1G-FE were also available from 2002 until 2008. After the discontinuation of the mild hybrid, they were only offered with 1TR-FPE engines. Six-cylinder engines were not offered in the short-wheelbase Comfort and lower trim levels of the Crown Comfort.

YXS10/YXS10H/LXS10 — The YXS10 was the first vehicle to be identified as the Crown Comfort. It came equipped with a lever-activated remote control rear passenger door, and a 4-speed automatic transmission (A43D) became standard in 2004 in some markets. The YXS10H is a Crown Sedan Super Saloon built from 2002 to 2008 equipped with the 3Y-PE LPG engine. The LXS10 is an export-only vehicle equipped with the naturally aspirated 2L diesel motor, with a column-mounted 4-speed/floor-mounted 5-speed manual transmission only.

YXS11/YXS11Y ー The YXS11/YXS11Y are 3Y-PE powered LPG models. The 11 series denotes a short-wheelbase version, identified as Toyota Comfort (without the word Crown on the nameplate). At 2680 mm, its wheelbase is 100 mm shorter than that of the 10 series. Additionally, cars with a Y suffix denotes that the car is a driver's education vehicle.

LXS11/LXS11Y ー The LXS11/LXS11Y are powered by the 2L-TE Turbodiesel engine. It was sold from 1996 to 1999, but was ultimately phased out in favour of the petrol-powered S-engined cars. The LXS11 taxi models only came in four-speed automatic, and only 6680 of these models were made.

LXS12 ー The LXS12 is an export-only Crown Comfort equipped with a naturally aspirated 5L diesel engine and a column-mounted 4-speed/floor-mounted 5-speed manual transmission. In Singapore, this model was identified simply as Toyota Crown (without the word Comfort on the nameplate).

SXS11Y/SXS13Y ー The SXS11Y is powered by the 4S-FE motor, and was made from 1996 to 2001. The SXS11Y was replaced by the 3S-FE powered SXS13Y in 2001. These models were only offered to driving schools; the TRD Comfort GT-Z Supercharger is also on the SXS13Y chassis.

GXS10/GXS12 ー The GXS10/GXS12 are powered by the 6-cylinder 1G engine. All GXS10 models were equipped with the 1G-GPE LPG engine, while the GXS12s had a 1G-FE petrol engine. GXS10 models were sold under the Crown Comfort nameplate between December 1995 and February 2001, offered exclusively in the Super Deluxe trim level, and the Crown Sedan nameplate between October 2001 and October 2002.[15] The GXS12 designation exclusively denotes Crown Sedan models manufactured between August 2001 and August 2007.[7]:{{{3}}}[16]

GBS12 ー The GBS12 is a mild hybrid version of the 6-cylinder petrol-powered Crown Sedan manufactured between October 2002 and August 2008.[7]:{{{3}}}

TSS10/TSS10H ー The TSS10 is a Crown Comfort Taxi powered by the 1TR-FPE LPG engine.[17] The TSS10H is a Crown Sedan Super Saloon, built from 2008 to 2018, utilising the same engine.

TSS11/TSS11Y/TSS13 ー The TSS11/TSS11Y are powered by the 1TR-FPE LPG engine.[17] The TSS13Y is a short-wheelbase driver's education model utilising a petrol powered 1TR-FE.

Engine SOHC 3Y-PE inline-four, 1,998 cc (LPG)
DOHC 1TR-FPE inline-four, 1,998 cc (LPG)
DOHC 1TR-FPE inline-four, 1,998 cc (LPG-HK)
DOHC 1G-GPE inline-six, 1,998 cc (LPG)
Bore and stroke 86mm x 86mm
Maximum power 79 PS (58 kW) at 4,400 rpm (3Y-PE)
113 PS (83 kW) at 4,800 rpm (1TR-FPE)
114 PS (84 kW) at 4,800 rpm (1TR-FPE)
Maximum torque 160 N·m (118 lb·ft) at 2,400 rpm (3Y-PE)
186 N·m (137 lb·ft) at 3,600 rpm (1TR-FPE)
189 N·m (139 lb·ft) at 3,600 rpm (1TR-FPE)
Transmission 4-speed automatic
4-speed manual
5-speed manual

Equipment

220px
220px
Toyota Crown Sedan

While the Comfort shares its underpinnings with the X80 Mark II, its body was thoroughly redesigned to increase interior space with an emphasis on rear passenger comfort.[12]:{{{3}}} To reduce unnecessary cost and weight while provisioning for the installation of taxi equipment, the more luxurious dashboard and interior fittings of the Mark II were replaced with a modified version of the base S130 Crown's dashboard and less bulky all-plastic fittings with very simple designs. Taxi models came equipped with fender mirrors, while the private use and driver's education cars were equipped with door-mounted mirrors. Early Comforts below the SG trim level had manual windows on all four doors; power front windows were optional, and standardised in the beginning of 1997. In 2007, Toyota added power windows on all four corners as an option. The front bumper is designed to be able to split in two, and driving lamps can be quickly removed for ease of repair in case of an accident.

Welcab versions of the taxi models were offered, adding a rear passenger seat that rotates outwards to aid the entry and exit of passengers with limited mobility; these cars can be identified by the International Symbol of Access on the corresponding door.[18] A "swing roof" option was also offered for Crown Comforts and Crown Sedans used in Shinto weddings, adding a hinged roof panel above the rear passenger door that opens upwards to allow for the clearance of a bride's wig and headdress during entry and exit.

In 2002, all models received ABS and a driver's airbag as standard, and the Crown Sedan received an updated dashboard with a more elegant design and standard passenger's airbag. In 2004, an LED third brake light replaced the original incandescent unit while side turn signals (shared with the XP30 bB) were added to the front fenders. In late 2007, a minor update was made to the Comfort's emissions system to meet more stringent emission standards set by Toyota, while the use of LED lights for instrument panel illumination was increased. In Hong Kong, the Comfort was slightly restyled by adopting the wider taillights used on the Japanese market Crown Sedan. Larger headrests were gradually phased in beginning with SG and Crown Sedan models circa 2001, and ending with Standard and Deluxe taxi models in 2012. All Comforts eventually gained a passenger airbag and start-stop system as standard equipment; the latter being offered exclusively in the Japanese market.

Comforts configured for driver's education use were only offered in the Deluxe trim level and are equipped with a secondary brake pedal on the passenger footwell for instructor use. and an auxiliary speedometer in the centre of the instrument panel. A radio delete option was offered for the driver's education model. Most (if not all) models from 1995 to 1997 were equipped with the auxiliary speedometer on the center console as standard. In 1996, an optional brake light indicator was added to the centre console. Cars built in 1997 had this light moved to the passenger side of the dash, with clutch and accelerator indicator lights added to the mix. All cars made after 1998 had the indicator lights moved to a redesigned centre console stack.

Trim levels

  • Standard ー included steel wheels (initially 14-inch, later 15-inch), three-point seat belts, air conditioning, a radio with two dash-mounted speakers, vinyl interior upholstery and power steering.
  • Deluxe ー added cloth interior upholstery (seating surfaces only before 2004); power locks, mirrors and windows were optional.
  • SG ー added standard power features, faux wood interior trim, premium cloth interior upholstery and wheel covers; 15-inch alloy wheels from the V30 Camry were optional. This was the highest trim level available for the short-wheelbase Comfort and was not offered for long-wheelbase models.[19][12]:{{{3}}}
  • Super Deluxe ー added more upscale exterior styling with wider taillights, deluxe wheel covers and chrome-finished versions of the optional alloy wheels; interior equipment included luxury seats, a premium dashboard and interior fittings, and an upgraded audio system with four door-mounted speakers. The front passenger seat can be configured with a fold-down centre section so that a rear passenger may stretch his feet forward. An optional "G Package" (named "Q Package" before August 2001) added luxury cloth upholstery and faux wood interior trim.[20] Super Deluxe models were marketed under the Crown Comfort nameplate before August 2001 and the Crown Sedan nameplate from August 2001 onwards. The addition of an air purifier and side curtain airbags to the list of Super Deluxe equipment coincided with the change of nameplate.
  • Super Saloon — added the "G Package" and chrome-finished alloy wheels as standard equipment, as well as longer bumpers. This trim level was introduced in 2002 and only marketed under the Crown Sedan nameplate. It was only available with four-cylinder LPG engines and was aimed primarily at corporate and government buyers; door mirrors were standard, while fender mirrors were available for cars used in taxi service.[21][22]

TRD Comfort GT-Z Supercharger

File:Comfortgtz 2012.jpg
TRD Comfort GT-Z Supercharger

The TRD Comfort GT-Z Supercharger was a limited production high-performance model made from July 2003 until February 2004. Total production of this version was 59 units.[23]

It was equipped with the 3S-FE type DOHC 2.0 L inline-four petrol engine fitted with an ORC-TX07 supercharger, producing 160 PS (118 kW) at 6100 rpm and 22.5 kg·m (221 N·m) at 3300 rpm.

Nameplate usage for other models

Comfort Hybrid (NTP10R)

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Main article: Toyota JPN Taxi

In July 2018, a rebadged version of the Toyota JPN Taxi debuted in Hong Kong under the Comfort Hybrid (Chinese: 豐田金豐混能的士) nameplate, with sales commencing in January 2019.[24][25] The powertrain is an "LPG hybrid system" based on the existing THS II, made compatible with LPG fuel through the use of the 1.5L 1NZ-FXP LPG engine.[26][27] As of May 2019, 17 Comfort Hybrids are in service and are due to replace the current fleet of LPG-only Crown Comforts.[27]:{{{3}}}

  • Toyota Comfort Hybrid Taxi EU752(Urban).jpg

    Hong Kong Urban Toyota Comfort Hybrid

  • HW330(Hong Kong New Territories Taxi) 22-10-2019.jpg

    Hong Kong New Territories Toyota Comfort Hybrid

  • JU2802(Hong Kong Lantau Taxi) 22-06-2020.jpg

    Hong Kong Lantau Toyota Comfort Hybrid

Gallery

  • Toyota Comfort driver's education car in Japan.

  • Izuhakone-Kotsu2944.jpg

    Toyota Comfort taxicab in Japan.

  • Toyota Crown Comfort taxicab in Hong Kong.

  • Toyota Crown Comfort taxicab in Singapore.

References

  1. ↑ 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ 4.0 4.1 4.2 4.3 Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ 6.0 6.1 Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ 7.0 7.1 7.2 Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ 12.0 12.1 12.2 12.3 Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  16. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  17. ↑ 17.0 17.1 Lua error in package.lua at line 80: module 'strict' not found.
  18. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  19. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  20. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  21. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  22. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  23. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  24. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  25. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  26. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  27. ↑ 27.0 27.1 Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Toyota_Comfort&oldid=726359809"