White spirit

From Infogalactic: the planetary knowledge core
(Redirected from Turpentine substitute)
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

A 2-litre (4 imp pt) container of white spirit

White spirit (UK)[note 1] or mineral spirits (US),[1][2][3] also known as mineral turpentine, turpentine substitute, petroleum spirits, solvent naphtha (petroleum), varsol, Stoddard solvent,[4][5] or, generically, "paint thinner", is a petroleum-derived clear liquid used as a common organic solvent in painting and decorating.

A mixture of aliphatic and alicyclic C7 to C12 hydrocarbons, white spirit is used as an extraction solvent, as a cleaning solvent, as a degreasing solvent and as a solvent in aerosols, paints, wood preservatives, lacquers, varnishes, and asphalt products. In western Europe about 60% of the total white spirit consumption is used in paints, lacquers and varnishes. White spirit is the most widely used solvent in the paint industry. In households, white spirit is commonly used to clean paint brushes after use, to clean auto parts and tools, as a starter fluid for charcoal grills, to remove adhesive residue from non-porous surfaces, and many other common tasks.

Content

White spirit is a mixture of aliphatic and alicyclic C7 to C12 hydrocarbons with a maximum content of 25% of C7 to C12 aromatic hydrocarbons. A typical composition for mineral spirits is > 65% C10 or higher hydrocarbons,[6] aliphatic solvent hexane, and a maximum benzene content of 0.1% by volume, a kauri-butanol value of 29, an initial boiling point of 145 °C (293 °F) to 174 °C (345 °F), and a density of 0.79 g/ml.

Types and grades

Three different types and three different grades of white spirit exist. The type refers to whether the solvent has been subjected to hydrodesulfurization (removal of sulfur) alone (type 1), solvent extraction (type 2) or hydrogenation (type 3).

Each type comprises three different grades: low flash grade, regular grade, and high flash grade. The grade is determined by the crude oil used as the starting material and the conditions of distillation.

In addition there is type 0, which is defined as distillation fraction with no further treatment, consisting predominantly of saturated C9 to C12 hydrocarbons with a boiling range of 140–200 °C.

Stoddard solvent is a specific mixture of hydrocarbons, typically > 65% C10 or higher hydrocarbons,[7] developed in 1924 by Atlanta dry cleaner W. J. Stoddard and Lloyd E. Jackson of the Mellon Institute of Industrial Research as a less volatile petroleum-based dry cleaning solvent than the petroleum solvents then in use. Dry cleaners began using the result of their work in 1928 and it soon became the predominant dry cleaning solvent in the United States, until the late 1950s.[citation needed]

Turpentine substitute is generally not made to a standard and can have a wider range of components than products marketed as white spirit, which is made to a standard (in the UK, British Standard BS 245, in Germany, DIN 51632). Turpentine substitute can be used for general cleaning but is not recommended for paint thinning as it may adversely affect drying times due to the less volatile components; while it may be used for brush cleaning its heavier components may leave an oily residue.

Chemical numbers

CAS EINECS Name Name
8030-30-6 232-443-2 Naphtha
8052-41-3 232-489-3 Stoddard solvent
64475-85-0 265-185-4 white spirit type 1
64741-92-0 265-095-5 white spirit type 2 solvent-refined heavy naphtha (petroleum)
64742-48-9 265-150-3 white spirit type 3 hydrotreated heavy naphtha (petroleum)
64742-88-7 265-191-7 white spirit type 0 medium aliphatic solvent naphtha (petroleum)

Physical properties

Mineral turpentine

The physical properties of the three types of white spirit are:

Property T1: Low flash T2: Regular T3: High flash
Initial boiling point (IBP) (°C) 130–144 145–174 175–200
Final boiling point (°C) IBP+21, max. 220
Average relative molecular mass 140 150 160
Relative density (15 °C) 0.765 0.780 0.795
Flash point (°C) 21–30 31–54 > 55
Vapour pressure (kPa, 20 °C) 1.4 0.6 0.1
Volatility (n-butyl acetate=1) 0.47 0.15 0.04
Autoignition temperature (°C) 240 240 230
Explosion limits (Flammable Range) (% by volume in air) 0.6–6.5 0.6–6.5 0.6–8
Vapour density (air=1) 4.5–5 4.5–5 4.5–5
Refractive index (at 20 °C) 1.41–1.44 1.41–-1.44 1.41–1.44
Viscosity (cps, 25 °C) 0.74–1.65 0.74–1.65 0.74–1.65
Solubility (% by weight in water) < 0.1 < 0.1 < 0.1
Kauri-butanol value 29–33 29–33 29–33
Aniline point (°C) 60–75 60–75 60–75
Reactivity reaction with strong oxidizing agents
Odor threshold (mg/m3) 0.5–6 4

Use

White Spirit is a petroleum distillate used as a paint thinner and mild solvent. In industry, mineral spirits are used for cleaning and degreasing machine tools and parts, and in conjunction with cutting oil as a thread cutting and reaming lubricant.

Mineral spirits are an inexpensive petroleum-based replacement for the vegetable-based turpentine. It is commonly used as a paint thinner for oil-based paint and cleaning brushes, and as an organic solvent in other applications. Mineral turpentine is chemically very different from turpentine, which mainly consists of pinene, and it has inferior solvent properties.[8][not in citation given] Artists use mineral spirits as an alternative to turpentine since it is less flammable and less toxic. Because of interactions with pigments, artists require a higher grade of mineral spirits than many industrial users, including the complete absence of residual sulfur.

Mineral spirits have a characteristic unpleasant kerosene-like odor. Chemical manufacturers have developed a low odor version of mineral turpentine which contains less of the highly volatile shorter hydrocarbons.[9] Odorless mineral spirits are mineral spirits that have been further refined to remove the more toxic aromatic compounds, and are recommended for applications such as oil painting, where humans have close contact with the solvent.

In screen printing (also referred to as silk-screening), mineral spirits are often used to clean and unclog screens after printing with oil-based textile and plastisol inks. They are also used to thin inks used in making monoprints.

Mineral spirits are often used inside liquid-filled compasses and gauges.[10]

Mineral spirits are also used for re-gripping golf clubs. After the old grip is removed, the mineral spirits are poured into the new grip and shaken. After the mineral spirits are poured on, the new underlying tape and the new grip are slid on. After an hour of drying out, the new grip and club are ready to use.

Although not normally marketed as a fuel, white spirit can be used as an alternative to kerosene in portable stoves, since it is merely a light grade of kerosene.[citation needed] It cannot be used as an alternative to white gas, which is a much more volatile gasoline-like fuel.

White spirits are also a major ingredient in some popular automotive fuel/oil additives, such as Marvel Mystery Oil, as they are capable of dissolving varnish and sludge buildup.[11]

Mineral spirits are also commonly used for cutting fluid in ultraprecision lathes (commonly referred to as diamond turning machines).

Toxicity

White spirit is mainly classed as an irritant. It has a fairly low acute toxicity by inhalation of the vapour, dermal (touching the skin) and oral routes (ingestion). However, acute exposure can lead to central nervous system depression resulting in lack of coordination and slowed reactions. Exposure to very high concentrations in enclosed spaces can lead to general narcotic effects (drowsiness, dizziness, nausea etc...) and can eventually lead to unconsciousness. Oral ingestion presents a high aspiration hazard. Prolonged or repeated skin exposure over a long period of time can result in severe irritant dermatitis, also called contact dermatitis. Exposure to white spirit in direct contact with the skin for several hours can cause severe chemical burns.[12] It is recommended that skin exposure be kept to a minimum by use of gloves, and that hands be washed after contact. Occasional exposure to skin is highly unlikely to cause any problems.[citation needed][original research?]

Exposure to an average white spirit concentration of 240 mg/m3 (40 ppm) for more than 13 years[clarification needed] could lead to chronic central nervous system effects.[citation needed] White spirit is implicated in the development of "chronic toxic encephalopathy" among house painters.[citation needed]

Owing to the volatility and low bioavailability of its constituents, white spirit, although it is moderately toxic to aquatic organisms, is unlikely to present significant hazards to the environment. It should not however, be purposely poured down the sink or freshwater drain.

People can be exposed to Stoddard solvent in the workplace by breathing it in, swallowing it, skin contact, and eye contact. The Occupational_Safety_and_Health_Administration (OSHA) has set the legal limit (Permissible_exposure_limit) for Stoddard solvent exposure in the workplace as 500 ppm (2900 mg/m3) over an 8-hour workday. The National_Institute_for_Occupational_Safety_and_Health (NIOSH) has set a Recommended_exposure_limit (REL) of 350 mg/m3 over an 8-hour workday and 1800 mg/m3 over 15 minutes. At levels of 20,000 mg/m3, Stoddard solvent is immediately dangerous to life and health.[13]

Footnotes

  1. Primarily in the United Kingdom. In Australia and New Zealand "white spirit" can also refer to Coleman fuel (white gas).

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Stoddard Solvent
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Dieter Stoye “Solvents” in Ullmann's Encyclopedia of Industrial Chemistry2002, Wiley-VCH, Wienheim. doi:10.1002/14356007.a24_437
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.

External links