This is a good article. Click here for more information.

USS Philadelphia (1776)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Philadelphia
USSPhiladelphiaModel.jpg
Model of Philadelphia as built
History
Namesake: City of Philadelphia
Builder: Hermanus Schuyler
Laid down: July 1776
Launched: August 1776
Completed: August 1776
Fate:
  • Sunk, 11 October 1776
  • Raised, 1935
Status: On public display
General characteristics
Type: Gundalow
Displacement: 29 long tons
Length: 53 ft (16 m)
Beam: 15 ft (4.6 m)
Draft: 2 ft (0.61 m)
Depth: 4 ft (1.2 m)
Complement: 45
Armament:
  • 1 × 12-pounder (5.4 kg) gun
  • 2 × 9-pounder (4.1 kg) guns
PHILADELPHIA (Gundalow)
GunboatPhiladelphia.jpg
Philadelphia on display at the National Museum of American History
Location 14th St. and Constitution Ave., NW
Washington, D.C.
Built 1776
Architect Hermanus Schuyler
Architectural style Other
NRHP Reference # 66000852[1]
Significant dates
Added to NRHP 15 October 1966[1]
Designated NHL 20 January 1961[2]

Philadelphia is a gunboat (referred to in contemporary documents as a gundalow or gondola) of the Continental Navy. Manned by Continental Army soldiers, she was part of a fleet under the command of General Benedict Arnold that fought the 11 October 1776 Battle of Valcour Island against a larger Royal Navy fleet on Lake Champlain. Although many of the American boats in the battle were damaged in the battle, Philadelphia was one of the few actually sunk that day. On the days following the main battle, most of the other boats in the American fleet were sunk, burned, or captured. She is one of a few such vessels used during the American Revolutionary War to be raised.

In 1935, amateur military marine archaeologist Lorenzo Hagglund located her remains standing upright at the bottom of Lake Champlain, and had her raised. Bequeathed to the Smithsonian Institution in 1961, Philadelphia and associated artifacts are part of the permanent collection of the National Museum of American History, in Washington, D.C., where curator Philip K. Lundeberg was responsible for arranging her initial display. The vessel is listed on the National Register of Historic Places and is a National Historic Landmark.

Background

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The American Revolutionary War, which began in April 1775 with the Battles of Lexington and Concord, widened in September 1775 when the Continental Army embarked on an invasion of the British Province of Quebec. The province was viewed by the Second Continental Congress as a potential avenue for British forces to attack and divide the rebellious colonies, and was at the time lightly defended. The invasion reached a peak on December 31, 1775, when the Battle of Quebec ended in disaster for the Americans. In the spring of 1776, 10,000 British and German troops arrived in Quebec, and General Guy Carleton, the provincial governor, drove the Continental Army out of Quebec and back to Fort Ticonderoga.[3]

Carleton then launched his own offensive intended to reach the Hudson River, whose navigable length begins south of Lake Champlain and extends down to New York City. Control of the upper Hudson would enable the British to link their forces in Quebec with those in New York, recently captured in the New York campaign by Major General William Howe. This strategy would separate the American colonies of New England from those farther south and potentially quash the rebellion.[4]

The only ships on the lake following the American retreat from Quebec were those of a small fleet of lightly armed ships that Benedict Arnold had assembled following the capture of Fort Ticonderoga in May 1775. This fleet, even if it had been in British hands, was too small to transport the large British army to Fort Ticonderoga.[5]

Fleet development

During their retreat from Quebec, the Americans carefully took or destroyed all ships on Lake Champlain that might prove useful to the British. When Arnold and his troops, making up the rear guard of the army, abandoned Fort Saint-Jean, they burned or sank all the boats they could not use, and set fire to the sawmill and the fort. These actions effectively denied the British any hope of immediately moving onto the lake.[6]

The two sides set about building fleets: the British at Saint-Jean and the Americans at the other end of the lake in Skenesborough (present-day Whitehall, New York). While planning Quebec's defenses in 1775, General Carleton had anticipated the problem of transportation on Lake Champlain, and had requested the provisioning of prefabricated ships from Europe. Because of this planning, the British were able to assemble a fleet that significantly overpowered that of the Americans.[7][8][9] In total, the British fleet (25 armed vessels) had more firepower than the Americans' 15 vessels, with more than 80 guns outweighing the 74 smaller American guns.[10][11]

The American shipbuilding effort at Skenesborough was overseen by Hermanus Schuyler (possibly a relation of Major General Philip Schuyler), and the outfitting was managed by military engineer Jeduthan Baldwin. Schuyler began work in April to produce boats larger and more suitable for combat than the small shallow-draft boats known as bateaux that were used for transport on the lake. The process eventually came to involve General Benedict Arnold, who was an experienced ship's captain, and David Waterbury, a Connecticut militia leader with maritime experience. Major General Horatio Gates, in charge of the overall defense of the lake, eventually asked Arnold to take more responsibility in the shipbuilding effort, because "I am intirely uninform'd as to Marine Affairs."[12]

Construction of Philadelphia

Philadelphia was one of eight gundalows (also called gondolas in contemporary documents) constructed at Skenesboro. She was laid down early in July 1776 and launched in mid-August. Constructed primarily of oak, she was larger than a bateaux at 53 ft 2 in (16.21 m) long with a beam of 15 ft 2 in (4.62 m). She featured a single 36-foot (10.97 m) mast with square-rigged sail and topsail, and mounted three cannons, one 12-pounder (5.4 kg) facing forward and two 9 pounders (4.1 kg) facing port and starboard respectively. She also had mounting points for up to eight swivel guns, and was estimated by the Smithsonian to displace 29 long tons (32.5 short tons; 29.5 t). Late in her construction General Arnold ordered that her aft deck be raised in order to accommodate a mortar. This modification was apparently undone after the mortar exploded during test firing at Fort Ticonderoga. In order to maintain equilibrium, ballast rocks were probably used in the aft portion of the boat once the mortar was removed. For the relative comfort of its crew, the boat had a canvas awning aft of the mast and fascines were probably lashed to its sides to diffuse musket fire aimed at the boat.[13]

Contemporary watercolor depicting the American line of battle

Service history

Philadelphia was placed in service under a Captain Rice shortly after she was completed. Late in August General Arnold assembled his fleet and cruised provocatively on the northern stretches of Lake Champlain. On September 23, in anticipation of the larger British fleet's arrival, he stationed his ships in Valcour Bay, the strait separating the western shore of the lake from Valcour Island. When the two forces clashed on October 11, Philadelphia was under the command of Benjamin Rue,[14] and was part of the formation Arnold established in the Valcour strait. Early in the six-hour fight the 12-gun schooner USS Royal Savage ran aground and was burned.[15][16] Toward dusk the British guns holed Philadelphia with a 24-pound (10.9 kg) shot and she soon sank.[17] Darkness ended the action, and Arnold was able to slip away during the night.[18] Many of his remaining ships were burned, sunk, or captured over the next two days as the British pursued him toward Ticonderoga.[19]

In sea trials of the replica Philadelphia II, the Lake Champlain Maritime Museum determined that the boat was not particularly maneuverable: contemporary accounts of sailing the vessels include reports that the gondolas skipped across the waters of the lake, blown by the wind, and needed safe shelter when winds were high.[20]

Raising the wreck

In the 1930s, Lorenzo Hagglund, a veteran of World War I and a history buff, began searching the strait for remains of the battle. In 1932 he found the remains of Royal Savage's hull, which he successfully raised in 1934.[21][22] Hagglund followed up his discovery of Royal Savage with the discovery of Philadelphia's remains in 1935, sitting upright on the lake bottom.[23] He raised her that year; in addition to the guns and hull, hundreds of other items were recovered from the vessel. These relics included shot, cooking utensils, tools, buttons, buckles and human bones.[24]

Philadelphia was exhibited at various locations on Lake Champlain and the Hudson River before becoming a long-term display at Exeter, New York.[24] Lorenzo Hagglund spent years searching for other ships in Arnold's fleet, and raised another gunboat in 1952. Funding for a structure to house that find and the Royal Savage fell through, and that boat's remains were eventually ruined through neglect and looting.[25]

In the wake of that failure Hagglund approached the Smithsonian Institution to preserve Philadelphia, and in 1961, bequeathed her and associated artifacts to that organization.[25] According to the Whitehall Times, the remains had suffered more damage during their time above water than below.[26] The boat and artifacts are now part of the permanent collection of the National Museum of American History, in Washington, D.C.[24] She is listed on the National Register of Historic Places and is designated a National Historic Landmark.[2][1] She remains in precarious condition: as of 2001 the wood and iron fittings continued to show signs of deterioration despite attempts to stabilize them.[27]

In 1997, another pristine underwater wreck was located during a survey by the Lake Champlain Maritime Museum. Two years later it was conclusively identified as the gundalow Spitfire.[28]

References

  1. 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. For detailed treatment of the background, see e.g. Stanley (1973) or Morrissey (2003).
  4. Hamilton (1964) pp. 17–18
  5. Malcolmson (2001), p. 26
  6. Stanley (1973), pp. 131–132
  7. Silverstone (2006), p. 15
  8. Stanley (1973), pp. 133–136
  9. Miller (1974), p. 170
  10. Silverstone (2006), pp. 15–16
  11. Stanley (1973), pp. 137–138
  12. Nelson (2006), p. 243
  13. Bratten (2002), pp. 93–109
  14. Nelson (2006), p. 262
  15. Miller (1974), p. 173
  16. Stanley (1973), p. 142
  17. Miller (1974), p. 174
  18. Nelson (2006), pp. 307–309
  19. Bratten (2002), pp. 67–69
  20. Cubbison 2010, p. 223.
  21. Bratten (2002), p. 75
  22. Lua error in package.lua at line 80: module 'strict' not found.
  23. Bratten (2002), p. 77
  24. 24.0 24.1 24.2 Lua error in package.lua at line 80: module 'strict' not found.
  25. 25.0 25.1 Bratten (2002), p. 76
  26. Bratten (2002), p. 87
  27. Bratten (2002), pp. 91–92
  28. Lua error in package.lua at line 80: module 'strict' not found.

Bibliography

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found. This work contains detailed specifications for most of the watercraft used in the Battle of Valcour Island, as well as copies of draft documents for some of them.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

Further reading

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

External links

Lua error in package.lua at line 80: module 'strict' not found.