Valmet M82

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Valmet M82
Type Bullpup assault rifle
Place of origin Finland
Production history
Designer Valmet
Manufacturer Valmet
Produced 1978-1986
Number built Approx. 2000
Specifications
Weight 3.3 kg
Length 710 mm
Barrel length 415 mm

Cartridge 5.56×45mm NATO
7.62×39mm
Action Gas-operated, rotating bolt
Rate of fire 750 rounds/min
Feed system 30-round detachable box magazine
Sights Iron sights

The Valmet M82 is a bullpup assault rifle with a Valmet M76 internal design created by Finnish company Valmet.

History

The M82 was introduced in Finland in 1978 and discontinued production in 1986. Only ~ 2,000 M82 were manufactured, mostly as semi-automatic version in 5.56 mm NATO caliber for ODIN International ltd. in Alexandria, Virginia. Few samples were issued to the Finnish Army paratroopers, but the rifle was found unsuitable as service weapon. One issue that cropped up during its short service life was that the rear sight of an uncased rifle had a tendency to hit the lower face, nose and cheekbones of the paratrooper during landing. The rifle was also ill-balanced, as nearly all the weight was in the rear of the rifle.

Technical Data

It is chambered for 5.56×45mm NATO caliber as model 255 470 and for 7.62×39mm caliber as model 255 490. It has a Valmet M76 receiver, which is made from stamped and riveted sheet metal, constructed inside urethane stock.[1] The trigger of the weapon is polymer to prevent heat of the barrel conducting to it, as the trigger is mounted to the barrel of the gun.

Features

The M82 features an unusual sight arrangement. The front and rear sights, similar to a Bren Machinegun or some other belt fed machineguns, are offset to the left. The sights are aligned normally with the right eye, but are offset from the barrel about 1.25 inches. This results in the rifles windage being accurate for the zeroed range only. Shots taken at closer ranges to zero will hit to the right of the target and shots taken at longer ranges will hit to the left of the target. With the sight offset from the barrel by approximately 1.25", if the rifles windage were zeroed at 50 meters, at 100 meters distance the windage error would be about 1.25 inches and at 200 meters distance the windage error would be 3.75 inches. This results in a margin of error making shots over 300 meters difficult. Since the fixed sights do not allow for any elevation adjustment, it is clear that this weapon is meant for combat accuracy (6" at 100 meters) at short/urban ranges only and not meant to be a precision sniping tool.

The offset sight arrangement and right side ejection mean that this weapon is very difficult to be used by left handers and not possible to use left handed in an urban or close combat situation. Modern bullpups have eliminated this drawback by using centrally-aligned optics and either forward, downward or rearward ejection to allow ambidextrous use in combat situations.

See also

Notes

External links