Wolf WR1

From Infogalactic: the planetary knowledge core
(Redirected from Wolf WR2)
Jump to: navigation, search
Wolf WR1-4
File:Wolf WR1 at Barber 01.jpg
The WR1 demonstrated at Barber Motorsports Park in 2010
Category Formula One
Constructor Walter Wolf Racing
Designer(s) Harvey Postlethwaite
Successor Wolf WR5
Technical specifications[1]
Chassis Aluminium monocoque, with engine as a fully stressed member.
Axle track Front: 1,410 mm (56 in)
Rear: 1,524 mm (60.0 in)
Wheelbase 2,616 mm (103.0 in)
Engine Ford Cosworth DFV 2,993 cc (182.6 cu in) 90° V8, naturally aspirated, mid-mounted.
Transmission Hewland FGA 400 6-speed manual gearbox
Weight 585 kilograms (1,290 lb)
Fuel FINA
Lubricants Castrol
Tyres Goodyear
Competition history
Notable entrants Walter Wolf Racing
Notable drivers South Africa Jody Scheckter
Finland Keke Rosberg
Debut 1977 Argentine Grand Prix
Races Wins Podiums Poles F.Laps
27 3 10 1 2
n.b. Unless otherwise stated, all data refer to
Formula One World Championship Grands Prix only.

The Wolf WR1 was a Formula One car built for the 1977 season by the Walter Wolf Racing team. Four examples of the car were produced. The first, completed well before the start of the season, was the WR1. Another two identical cars were built: WR2, finished ahead of the first race; and WR3, ready in March 1977. At the end of the season, a fourth car, WR4, was produced with slight adjustments, and WR1 was remodeled in similar fashion for 1978.[2] The original car was driven exclusively by South African future 1979 World Champion Jody Scheckter in 1977. WR3 and WR4 were also driven by fellow future World Champion Keke Rosberg in the 1978 season.

Competition history

For the 1976 Formula One season, Canadian Walter Wolf had bought 60% of the team Frank Williams Racing Cars, agreeing to keep on previous owner Williams as manager. Williams left the team however before the start of the 1977 season to form his new team Williams Grand Prix Engineering. Having run a renamed Hesketh 308C in 1976, Wolf now needed to build his own car, recruiting a group of talented designers for the job, spearheaded by Harvey Postlethwaite, who had worked at Hesketh Racing. WR1 became the team's first self-constructed car and it made an instant impression when Scheckter won the on its début, at the 1977 Argentine Grand Prix. The South African would go on to win two additional races, the prestigious Monaco Grand Prix and the team's home race in Canada, all in the WR1 chassis. He eventually finished the Championship in second place. Overall, WR1 was the most successful of the three chassis used in 1977: it raced in ten of the 17 races, scoring all three wins and one fastest lap. Scheckter managed another fastest lap at the Japanese Grand Prix in WR3 and one pole position with WR2 at Hockenheim.[1][3][4]

With the arrival of ground effect in 1978, the car became obsolete, even in its remodelled WR4 configuration, and was used only in some of the races. WR3 and later WR4 were given to Theodore Racing for their new-recruit Keke Rosberg, who finished just one of his races in the car, at the 1978 German Grand Prix. Scheckter scored one more podium finish in WR1 at the 1978 Monaco Grand Prix. Halfway through the season, the WR1 design was replaced with the new Wolf WR5.[1][5][6][7]

Complete Formula One World Championship results

(key) (results in bold indicate pole position; results in italics indicate fastest lap)

Year Entrant Chassis Drivers 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Points WCC
1977 Walter Wolf Racing WR1
WR2
WR3
ARG BRA RSA USW ESP MON BEL SWE FRA GBR GER AUT NED ITA USA CAN JPN 55 4th
Jody Scheckter 1 Ret 2 3 3 1 Ret Ret Ret Ret 2 Ret 3 Ret 3 1 10
1978 Walter Wolf Racing WR1
WR4
ARG BRA RSA USW MON BEL ESP SWE FRA GBR GER AUT NED ITA USA CAN 241 5th
Jody Scheckter 10 Ret Ret Ret 3
Bobby Rahal Ret
Theodore Racing WR3
WR4
Keke Rosberg 10 NC Ret DNPQ

14 points were scored using WR1-4, the remaining points were scored using the WR5-6.

References

  1. 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.

External links