Zinc chloride

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Zinc chloride
Zinc chloride hydrate
Kristallstruktur Zinkchlorid.png
Names
IUPAC name
Zinc chloride
Other names
Zinc(II) chloride
Zinc dichloride
Butter of zinc
Identifiers
7646-85-7 Anhydrous YesY
29426-92-4 Tetrahydrate N
ChEBI CHEBI:49976 YesY
ChEMBL ChEMBL1200679 N
ChemSpider 5525 YesY
EC Number 231-592-0
Jmol 3D model Interactive image
PubChem 3007855
RTECS number ZH1400000
UNII 86Q357L16B YesY
UN number 2331
  • InChI=1S/2ClH.Zn/h2*1H;/q;;+2/p-2 YesY
    Key: JIAARYAFYJHUJI-UHFFFAOYSA-L YesY
  • InChI=1/2ClH.Zn/h2*1H;/q;;+2/p-2
    Key: JIAARYAFYJHUJI-NUQVWONBAB
  • Cl[Zn]Cl
Properties
ZnCl2
Molar mass 136.315 g/mol
Appearance white crystalline solid
hygroscopic and very deliquescent
Odor odorless
Density 2.907 g/cm3
Melting point 290 °C (554 °F; 563 K)[1]
Boiling point 732 °C (1,350 °F; 1,005 K)[1]
432.0 g/L (25 °C)
Solubility soluble in ethanol, glycerol and acetone
Solubility in alcohol 430.0 g/L
Structure
Tetrahedral, linear in the gas phase
Pharmacology
ATC code B05XA12
Vapor pressure {{{value}}}
Related compounds
Other anions
Zinc fluoride
Zinc bromide
Zinc iodide
Other cations
Cadmium chloride
Mercury(II) chloride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Zinc chloride is the name of chemical compounds with the formula ZnCl2 and its hydrates. Zinc chlorides, of which nine crystalline forms are known, are colorless or white, and are highly soluble in water.[citation needed] ZnCl2 itself is hygroscopic and even deliquescent. Samples should therefore be protected from sources of moisture, including the water vapor present in ambient air. Zinc chloride finds wide application in textile processing, metallurgical fluxes, and chemical synthesis. No mineral with this chemical composition is known aside from the very rare mineral simonkolleite, Zn5(OH)8Cl2·H2O.

Structure and properties

Four crystalline forms (polymorphs) of ZnCl2 are known: α, β, γ, and δ, and in each case the Zn2+ ions are tetrahedrally coordinated to four chloride ions.[2]

Form Symmetry Pearson symbol Group No  a (nm)  b (nm) c (nm) Z ρ (g/cm3)
α Tetragonal tI12 I42d 122 0.5398 0.5398 0.64223 4 3.00
β Tetragonal tP6 P42/nmc 137 0.3696 0.3696 1.071 2 3.09
γ Monoclinic mP36 P21/c 14 0.654 1.131 1.23328 12 2.98
δ Orthorhombic oP12 Pna21 33 0.6125 0.6443 0.7693 4 2.98

Here, a, b, and c are lattice constants, Z is the number of structure units per unit cell and ρ is the density calculated from the structure parameters.[3][4][5]

The pure anhydrous orthorhombic form (δ) rapidly changes to one of the other forms on exposure to the atmosphere and a possible explanation is that the OH ions originating from the absorbed water facilitate the rearrangement.[2] Rapid cooling of molten ZnCl2 gives a glass.[6]

The covalent character of the anhydrous material is indicated by its relatively low melting point of 275 °C.[7] Further evidence for covalency is provided by the high solubility of the dichloride in ethereal solvents where it forms adducts with the formula ZnCl2L2, where L = ligand such as O(C2H5)2. In the gas phase, ZnCl2 molecules are linear with a bond length of 205 pm.[8]

Molten ZnCl2 has a high viscosity at its melting point and a comparatively low electrical conductivity that increases markedly with temperature.[8][9] A Raman scattering study of the melt indicated the presence of polymeric structures [10] and a neutron scattering study indicated the presence of tetrahedral {ZnCl4} complexes.[11]

Hydrates

Five hydrates of zinc chloride are known, ZnCl2(H2O)n where n = 1, 1.5, 2.5, 3 and 4.[12] The tetrahydrate ZnCl2(H2O)4 crystallizes from aqueous solutions of zinc chloride.[12]

Preparation and purification

Anhydrous ZnCl2 can be prepared from zinc and hydrogen chloride.

Zn(s) + 2 HCl → ZnCl2 + H2(g)

Hydrated forms and aqueous solutions may be readily prepared similarly by treating Zn metal with hydrochloric acid. Zinc oxide and zinc sulfide react with HCl:

ZnS(s) + 2 HCl(aq) → ZnCl2(aq) + H2S(g)

Unlike many other elements, zinc essentially exists in only one oxidation state, 2+, which simplifies purification of the chloride.

Commercial samples of zinc chloride typically contain water and products from hydrolysis as impurities. Such samples may be purified by recrystallization from hot dioxane . Anhydrous samples can be purified by sublimation in a stream of hydrogen chloride gas, followed by heating the sublimate to 400 °C in a stream of dry nitrogen gas. Finally, the simplest method relies on treating the zinc chloride with thionyl chloride.[13]

Reactions

Molten anhydrous ZnCl2 at 500–700 °C dissolves zinc metal, and, on rapid cooling of the melt, a yellow diamagnetic glass is formed, which Raman studies indicate contains the Zn2+
2
ion.[12]

A number of salts containing the tetrachlorozincate anion, ZnCl2−
4
, are known.[8] "Caulton's reagent," V2Cl3(thf)6Zn2Cl6 is an example of a salt containing Zn2Cl2−
6
.[14][15] The compound Cs3ZnCl5 contains tetrahedral ZnCl2−
4
and Cl anions.[2] No compounds containing the ZnCl4−
6
ion have been characterized.[2]

Whilst zinc chloride is very soluble in water, solutions cannot be considered to contain simply solvated Zn2+ ions and Cl ions, ZnClxH2O(4−x) species are also present.[16][17][18] Aqueous solutions of ZnCl2 are acidic: a 6 M aqueous solution has a pH of 1.[12] The acidity of aqueous ZnCl2 solutions relative to solutions of other Zn2+ salts is due to the formation of the tetrahedral chloro aqua complexes where the reduction in coordination number from 6 to 4 further reduces the strength of the O-H bonds in the solvated water molecules.[19]

In alkali solution in the presence of OH ion various zinc hydroxychloride anions are present in solution, e.g.Zn(OH)3Cl2−, Zn(OH)2Cl2−
2
, ZnOHCl2−
3
, and Zn5(OH)8Cl2·H2O (simonkolleite) precipitates.[20]

When ammonia is bubbled through a solution of zinc chloride the hydroxide does not precipitate, instead compounds containing complexed ammonia (ammines) are produced, Zn(NH3)4Cl2•H2O and on concentration ZnCl2(NH3)2.[21] The former contains the Zn(NH3)62+ ion [2] and the latter is molecular with a distorted tetrahedral geometry.[22] The species in aqueous solution have been investigated and show that Zn(NH3)42+ is the main species present with Zn(NH3)3Cl+ also present at lower NH3:Zn ratio.[23]

Aqueous zinc chloride reacts with zinc oxide to form an amorphous cement that was first investigated in the 1855 by Stanislas Sorel. Sorel later went on to investigate the related magnesium oxychloride cement, which bears his name.[24]

When hydrated zinc chloride is heated, one obtains a residue of Zn(OH)Cl e.g.[25]

ZnCl2•2H2O → ZnCl(OH) + HCl + H2O

The compound ZnCl2·½HCl·H2O may be prepared by careful precipitation from a solution of ZnCl2 acidified with HCl and it contains a polymeric anion (Zn2Cl5 )n with balancing monohydrated hydronium ions, H5O2+ ions.[2][26]

The formation of highly reactive anhydrous HCl gas formed when zinc chloride hydrates are heated is the basis of qualitative inorganic spot tests.[27]

The use of zinc chloride as a flux, sometimes in a mixture with ammonium chloride (see also Zinc ammonium chloride), involves the production of HCl and its subsequent reaction with surface oxides. Zinc chloride forms two salts with ammonium chloride, (NH4)ZnCl4 and (NH4)3ClZnCl4, which decompose on heating liberating HCl just as zinc chloride hydrate does. The action of zinc chloride/ammonium chloride fluxes, for example, in the hot dip galvanizing process produces H2 gas and ammonia fumes.[28]

Cellulose dissolves in aqueous solutions of ZnCl2 and zinc-cellulose complexes have been detected.[29] Cellulose also dissolves in molten ZnCl2 hydrate and carboxylation and acetylation performed on the cellulose polymer.[30]

Thus, although many zinc salts have different formulas and different crystal structures, these salts behave very similarly in aqueous solution. For example, solutions prepared from any of the polymorphs of ZnCl2 as well as other halides (bromide, iodide) and the sulfate can often be used interchangeably for the preparation of other zinc compounds. Illustrative is the preparation of zinc carbonate:

ZnCl2(aq) + Na2CO3(aq) → ZnCO3(s) + 2 NaCl(aq)

Applications

As a metallurgical flux

Zinc chloride has the ability to react with metal oxides (MO) to give derivatives of the formula MZnOCl2.[31] This reaction is relevant to the utility of ZnCl2 solution as a flux for soldering — it dissolves oxide coatings exposing the clean metal surface.[31] Fluxes with ZnCl2 as an active ingredient are sometimes called "tinner's fluid". Typically this flux was prepared by dissolving zinc foil in dilute hydrochloric acid until the liquid ceased to evolve hydrogen; for this reason, such flux was once known as "killed spirits". Because of its corrosive nature, this flux is not suitable for situations where any residue cannot be cleaned away, such as electronic work. This property also leads to its use in the manufacture of magnesia cements for dental fillings and certain mouthwashes as an active ingredient.

In organic synthesis

In the laboratory, zinc chloride (Silzic) finds wide use, principally as a moderate-strength Lewis acid. It can catalyze (A) the Fischer indole synthesis,[32] and also (B) Friedel-Crafts acylation reactions involving activated aromatic rings[33][34]

ZnCl2 aromatics.gif

Related to the latter is the classical preparation of the dye fluorescein from phthalic anhydride and resorcinol, which involves a Friedel-Crafts acylation.[35] This transformation has in fact been accomplished using even the hydrated ZnCl2 sample shown in the picture above.

ZnCl2 fluorescein.png

Hydrochloric acid alone reacts poorly with primary alcohols and secondary alcohols, but a combination of HCl with ZnCl2 (known together as the "Lucas reagent") is effective for the preparation of alkyl chlorides. Typical reactions are conducted at 130 °C. This reaction probably proceeds via an SN2 mechanism with primary alcohols but SN1 pathway with secondary alcohols.

ZnCl2 Lucas.gif

Zinc chloride also activates benzylic and allylic halides towards substitution by weak nucleophiles such as alkenes:[36]

ZnCl2 benzylation.gif

In similar fashion, ZnCl2 promotes selective NaBH3CN reduction of tertiary, allylic or benzylic halides to the corresponding hydrocarbons.

Zinc chloride is also a useful starting reagent for the synthesis of many organozinc reagents, such as those used in the palladium catalyzed Negishi coupling with aryl halides or vinyl halides.[37] In such cases the organozinc compound is usually prepared by transmetallation from an organolithium or a Grignard reagent, for example:

ZnCl2 Negishi.gif

Zinc enolates, prepared from alkali metal enolates and ZnCl2, provide control of stereochemistry in aldol condensation reactions due to chelation on to the zinc. In the example shown below, the threo product was favored over the erythro by a factor of 5:1 when ZnCl2 in DME/ether was used.[38] The chelate is more stable when the bulky phenyl group is pseudo-equatorial rather than pseudo-axial, i.e., threo rather than erythro.

ZnCl2 aldol.gif

In textile and paper processing

Concentrated aqueous solutions of zinc chloride (more than 64% weight/weight zinc chloride in water) have the interesting property of dissolving starch, silk, and cellulose. Thus, such solutions cannot be filtered through standard filter papers. Relevant to its affinity for these materials, ZnCl2 is used as a fireproofing agent and in fabric "refresheners" such as Febreze. Vulcanized fibre is made by soaking paper in concentrated zinc chloride.

Smoke grenades

The zinc chloride smoke mixture ("HC") used in smoke grenades contains zinc oxide and hexachloroethane, which, when ignited, react to form zinc chloride smoke, an effective smoke screen.[39]

Fingerprint detection

Ninhydrin reacts with amino acids and amines to form a colored compound “Ruhemann’s purple” (RP). Spraying with a zinc chloride solution forms a 1:1 complex RP:ZnCl(H2O)2, which is more readily detected as it fluoresces better than Ruhemann’s purple.[40]

Disinfectant

Historically, a dilute aqueous solution of zinc chloride was used as a disinfectant under the name "Burnett's Disinfecting Fluid". [41] It is also used in some commercial brands of antiseptic mouthwash.

Skin cancer treatment

Zinc chloride has been used in alternative medicine to cause eschars, scabs of dead tissue, in an attempt to cure skin cancers.[42] Various products, such as Cansema or "black salve", containing zinc chloride and sold as cancer cures have been listed by the U.S. Food and Drug Administration (FDA) as fake [43] with warning letters being sent to suppliers.[44]

Numerous reports in medical literature describe serious scarring and damage to normal skin by escharotic substances. Given these side-effects, its use in treatment is not warranted as there are much safer and more effective alternatives, such as radiation therapy and Mohs surgery.[45][46]

Safety considerations

Zinc chloride is a skin and respiratory irritant according to its MSDS.[47] Precautions that apply to anhydrous ZnCl2 are those applicable to other anhydrous metal halides, i.e. hydrolysis can be exothermic and contact should be avoided. Concentrated solutions are acidic and corrosive, and specifically attack cellulose and silk as Lewis acids.[48]

Zinc chloride fume has occupational exposure limits set, as the Occupational Safety and Health Administration and the National Institute for Occupational Safety and Health have both set limits at 1 mg/m3 over an eight time-weighted average. A short-term exposure limit for exposure is set at 2 mg/m3.[49] An Immediately Dangerous to Life and Health exposure is set at 50 mg/m3.[50]

References

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 2.3 2.4 2.5 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. 8.0 8.1 8.2 Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. 12.0 12.1 12.2 12.3 Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found. Describes the formation of anhydrous LiCl, CuCl2, ZnCl2, CdCl2, ThCl4, CrCl3, FeCl3, CoCl2, and NiCl2 from the corresponding hydrates.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. Lua error in package.lua at line 80: module 'strict' not found.
  20. Lua error in package.lua at line 80: module 'strict' not found.Lua error in package.lua at line 80: module 'strict' not found.
  21. Lua error in package.lua at line 80: module 'strict' not found.
  22. Lua error in package.lua at line 80: module 'strict' not found.
  23. Lua error in package.lua at line 80: module 'strict' not found.
  24. Lua error in package.lua at line 80: module 'strict' not found.
  25. Lua error in package.lua at line 80: module 'strict' not found.
  26. Lua error in package.lua at line 80: module 'strict' not found.
  27. Lua error in package.lua at line 80: module 'strict' not found.
  28. Lua error in package.lua at line 80: module 'strict' not found.
  29. Lua error in package.lua at line 80: module 'strict' not found.
  30. Lua error in package.lua at line 80: module 'strict' not found.
  31. 31.0 31.1 Lua error in package.lua at line 80: module 'strict' not found.
  32. Lua error in package.lua at line 80: module 'strict' not found.; Lua error in package.lua at line 80: module 'strict' not found.
  33. Lua error in package.lua at line 80: module 'strict' not found.; Lua error in package.lua at line 80: module 'strict' not found.
  34. Lua error in package.lua at line 80: module 'strict' not found.
  35. Lua error in package.lua at line 80: module 'strict' not found.
  36. Lua error in package.lua at line 80: module 'strict' not found.
  37. Lua error in package.lua at line 80: module 'strict' not found.
  38. Lua error in package.lua at line 80: module 'strict' not found.
  39. Lua error in package.lua at line 80: module 'strict' not found.
  40. Lua error in package.lua at line 80: module 'strict' not found.
  41. Lua error in package.lua at line 80: module 'strict' not found.
  42. Lua error in package.lua at line 80: module 'strict' not found.
  43. Lua error in package.lua at line 80: module 'strict' not found.
  44. Lua error in package.lua at line 80: module 'strict' not found.
  45. Lua error in package.lua at line 80: module 'strict' not found.
  46. Lua error in package.lua at line 80: module 'strict' not found.
  47. Lua error in package.lua at line 80: module 'strict' not found.
  48. Lua error in package.lua at line 80: module 'strict' not found.
  49. Lua error in package.lua at line 80: module 'strict' not found.
  50. Lua error in package.lua at line 80: module 'strict' not found.

Bibliography

  • N. N. Greenwood, A. Earnshaw, Chemistry of the Elements, 2nd ed., Butterworth-Heinemann, Oxford, UK, 1997.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • The Merck Index, 7th edition, Merck & Co, Rahway, New Jersey, USA, 1960.
  • D. Nicholls, Complexes and First-Row Transition Elements, Macmillan Press, London, 1973.
  • J. March, Advanced Organic Chemistry, 4th ed., p. 723, Wiley, New York, 1992.
  • G. J. McGarvey, in Handbook of Reagents for Organic Synthesis, Volume 1: Reagents, Auxiliaries and Catalysts for C-C Bond Formation, (R. M. Coates, S. E. Denmark, eds.), pp. 220–3, Wiley, New York, 1999.

External links