Bardwell Windmill

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Bardwell Windmill
Bardwell 1910.jpg
The mill in 1910
Origin
Mill name Bardwell Mill
Mill location TL 941 738
Lua error in package.lua at line 80: module 'strict' not found.
Operator(s) Private
Year built 1823
Information
Purpose Corn mill
Type Tower mill
Storeys Four storeys
Number of sails Four Sails
Type of sails Patent sails
Winding Fantail
Fantail blades Eight blades
Number of pairs of millstones Two pairs

Bardwell Mill is a Grade II* listed[1] tower mill at Bardwell, Suffolk, England which is under restoration.

History

Bardwell Mill was built in 1823. It worked by wind until 1925[2] and then by a Blackstone oil engine until 1941.[3] The mill was derelict in 1978[2] but was later purchased by James Waterfield, who completed the restoration of the mill in 1985. The mill was sold to Geoffrey and Enid Wheeler in July 1987.[4] On 16 October 1987, the mill was tailwinded when one of the gears in the fantail drive system became disengaged. The result was that the windshaft sheared at the rear of the canister, bringing the sails crashing to the ground.[5] Restoration work began again in 1989 but was hampered by limited funds. Geoffrey Wheeler died in 1995 and in 1997 The Friends of Bardwell Windmill was set up. English Heritage and St Edmundsbury Borough Council gave over £73,000 towards the estimated cost of £92,000 to restore the mill. The balance was to be raised by the Friends. A replacement cap,[4] cast iron windshaft[6] and fantail were fitted to the mill in 2004.[4]

Owing to rising costs, it was decided that the new sails would be constructed by volunteer labour. The first pair of sails were completed by late summer 2008[4] and fitted in late 2010.[7] The second pair of sails were fitted in April 2012.

Description

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Bardwell Mill is a four storey tower mill. The beehive cap is winded by a fantail. When fitted, the four double Patent sails have a span of 63 feet (19.20 m)[6] and are carried on a cast iron windshaft[1] which was cast in 1989[8] (the original windshaft in the mill was cast in two pieces[9]). The brake wheel is wood, driving a cast iron wallower carried on a wooden upright shaft. The wooden great spur wheel drives two pairs of overdrift millstones. A wooden crownwheel[1] on the upright shaft drives a sack hoist.[9]

Millers

  • Geoffrey Wheeler 1987-95
  • James Waterfield 1985-87
  • Simon Wooster 1987

References for above:-[4][10]

Public access

The mill is open to the public "at any reasonable time".[11]

References

  1. 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 4.2 4.3 4.4 Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. 6.0 6.1 Lua error in package.lua at line 80: module 'strict' not found.
  7. http://www.geograph.org.uk/photo/2062898
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. 9.0 9.1 Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.

External links