Boilerplate (spaceflight)
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
![](/w/images/thumb/1/14/GeminiBP.jpg/300px-GeminiBP.jpg)
A boilerplate spacecraft, also known as a mass simulator, is a nonfunctional craft or payload which is used to test various configurations and basic size, load, and handling characteristics of rocket launch vehicles. It is far less expensive to build multiple, full-scale, non-functional boilerplate spacecraft than it is to develop the full system (design, test, redesign, and launch). In this way, boilerplate spacecraft allow components and aspects of cutting-edge aerospace projects to be tested while detailed contracts for the final project are being negotiated. These tests may be used to develop procedures for mating a spacecraft to its launch vehicle, emergency access and egress, maintenance support activities, and various transportation processes.
Boilerplate spacecraft are most commonly used to test manned spacecraft; for example, in the early 1960s, NASA performed many tests using boilerplate Apollo spacecraft atop Saturn I rockets, and Mercury spacecraft atop Atlas rockets (for example Big Joe 1). The Space Shuttle Enterprise was used as a boilerplate to test launch stack assembly and transport to the launch pad. The development of NASA's Project Constellation used boilerplate Orion spacecraft atop an Ares I rocket for initial testing.
Contents
Mercury boilerplates
Mercury boilerplates were manufactured "in-house" by NASA Langley Research Center technicians prior to McDonnell Aircraft Company building the Mercury spacecraft. The boilerplate capsules were designed and used to test spacecraft recovery systems, and escape tower and rocket motors. Formal tests were done on the test pad at Langley and at Wallops Island using the Little Joe rockets.[1][2]
A summary of Mercury boilerplates can be found at A Field Guide to American Spacecraft.
Etymology
The term boilerplate originated from the use of boilerplate steel[3] for the construction of test articles/mock-ups. Historically, during the development of the Little Joe series of 7 launch vehicles, there was only one actual boilerplate capsule and it was called such since its conical section was made of steel at the Norfolk Naval Shipyard. This capsule was used in a beach abort test, and then subsequently used in the LJ1A flight. However, the term subsequently came to be used for all the prototype capsules (which in their own right were nearly as complicated as the orbital capsules). This usage was technically incorrect, as those other capsules were not made of boilerplate, but the boilerplate term had effectively been genericized.
Notable events
- 1959 July 22 - First successful pad abort flight test with a functional escape tower attached to a Mercury Boilerplate.
- 1959 July 28 - A Mercury boilerplate with instrumentation to measure sound pressure levels and vibrations from the Little Joe test rocket and Grand Central abort rocket/escape tower.
- 1959 September 9 - A Big Joe Atlas boilerplate Mercury (BJ-1) was successfully launched and flown from Cape Canaveral. This test flight was to determine the performance of the heat shield and heat transfer to the boilerplate, to observe flight dynamics of boilerplate during re-entry into the South Atlantic, to perform and evaluate capsule floatation and recovery system procedures, and to evaluate the entire capsule and rocket characters and system controls.[6]
- 1960 May 9 - Beach Abort test with a Little Joe rocket was successful.
- 1961 February 25 - A successful drop test of the Mercury boilerplate spacecraft fitted with impact skirt, straps and cables, and a heat shield.[7]
- 1961 March 24 - A successful Mercury-Redstone BD (MR-3) launched occurred with an apogee of 181 km (112 mi); first sub-orbital unmanned flight.[7]
Photos
|
Gemini boilerplates
There were seven Gemini boilerplates: BP-1, 2, 3, 3A, 4, 5, and 201.[8] Gemini Boilerplate 3A had functional doors and had multi-uses for testing watertightness, flotation collars, and egress procedures.
Photos
|
Apollo boilerplates
NASA created a variety of Apollo boilerplates. A list of them can be found in Apollo Section of A Field Guide to American Spacecraft.
Launch escape system tests (LES)
Apollo boilerplates were used in the Launch Escape System (LES) for tests of the jettison tower rockets and procedures:
- BP-6 with Pad Abort Test-1 - LES pad abort test from launch pad; with photo.
- BP-23A with Pad Abort Test-2 - LES pad abort test of near Block-I CM; with photo.
- BP-23 with Mission A-002 Test Flight - LES test of canards, Oct.29-Nov.5, 1964.[9]
- BP-27 with LES-015 - Dynamic tests.[10]
Boilerplate tests
- BP-1 - Water impact tests[10]
- BP-2 - Flotation tests storage[10]
- BP-3 - Parachute tests[10]
- BP-6,-6B, - PA-1, later Parachute drop test vehicle,[10] and LES pad abort flight test to demonstrate launch escape system's (LES) pad abort(PA) performance at White Sands Missile Range.[11]
- BP-9 with Mission A-105(SA-10) Test Flight, Micro Meteoroid Dynamic Test; not recovered.[10]
- BP-12 with Mission A-001 Test Flight, now at former NASA Facility, Downey, CA[9] to test the LES transonic abort flight performance at White Sands Missile Range.[11]
- BP-13 with Mission A-101(SA-6) Test Flight, not recovered[10]
- BP-14 with environmental control system tests, Oct. 22-29, 1964,[9] consisted of Command Module 14, Service Module 3, Launch Escape System 14, and Saturn Launch Adapters.[10]
- BP-15 with Mission A-102(SA-7) Test Flight, not recovered.[10]
- BP-16 with Mission A-103 Test Flight, another Micro Meteoroid test, not recovered.[10]
- BP-19A - VHF antenna, parachute drop tests;[10] now at the Columbia Memorial Space Center (former NASA Facility, Downey, CA)[12]
- BP-22 with Mission A-003 Test Flight; boilerplate on display at Johnson Space Center, Houston, TX[13]
- BP-23 - LES high-dynamic-pressure abort flight performance tests at White Sands Missile Range.[11]
- BP-23A - LES pad abort flight performance tests with Canard, BPC, and major sequencing changes at White Sands Missile Range,[11] now displayed with SA-500D at the U.S. Space & Rocket Center, Huntsville, Alabama.[10]
![](/w/images/thumb/2/2f/Apollo_Test_Capsule_%22Boilerplate-29%22_at_Barringer_Crater.jpg/200px-Apollo_Test_Capsule_%22Boilerplate-29%22_at_Barringer_Crater.jpg)
- BP-25 Command Module (CM) - Water recovery test, at Fort Worth Museum of Transportation[10]See BP-25 photo
- BP-26 with Mission A-104(SA-8) Test Flight - another Micro Meterioid test.[10]
- BP-27 CM and Service Module with LES-16 - Stack and engine gimbal test.[10] Now on display atop the vertical Saturn V at the U.S. Space & Rocket Center, Huntsville, Alabama.[14]
- BP-28A - Impact tests[10]
- BP-29 - Uprighting drop tests at Downey, CA, Oct. 30, 1964, on display at Barringer Crater, Arizona[9][10]
- BP-30 - Swing arm tests; currently on display at Kennedy Space Center's Apollo/Saturn V Center[10]
Specific Apollo BP units
BP-1101A
BP-1101A was used in numerous tests to develop spacecraft recovery equipment and procedures. Specifically, 1101A tested the air bags as part of the "up-righting" procedure when the Apollo lands upside down in the water. The sequence of the bags inflating caused the capsule to roll and up-right itself.[15]
This McDonnell boilerplate is now on loan to the Wings Over the Rockies Air and Space Museum,[16] Denver, Colorado, from the Smithsonian. BP-1101A has an external painted marking of AP.5. Examination of the interior in 2006 revealed large heavy steel ingots.[17] After further research, a new paint scheme was applied in June 2007.
|
BP-1102A
BP-1102 was used for water egress trainer for all Apollo flights, including by the crew of Apollo 11, the first lunar landing mission. It was also adapted for mock-up interior components and used by astronauts to practice routine and emergency exits from the spacecraft.
It was then modified again where the interior was set up to be configured either as Apollo/Soyuz or a proposed five-man Skylab Rescue vehicle. With these two conversion, astronauts could train for those special missions. It was finally transferred from NASA to the Smithsonian in 1977, and is displayed now at the Hazy Center with the flotation collar and bags that were attached to Columbia at the end of its historic mission. [18]
BP-1220/1228 Series
The purpose of this series design was to simulate the weight and other external physical characteristics of the Apollo command module. These prototypes were in the 9000 lb range for both laboratory water tanks and ocean tests. The experiments tested floatation collars, collar installations, and buoyancy characteristics. The Navy trained their recovery personnel for ocean collar installation and shipboard retrieval procedures. These boilerplates rarely had internal equipment.[19] See BP-1220 photo.
- BP-1224
BP-1224 was a Component level Flammability Test Program to test for design decisions on selection and application of nonmetallic materials. Boilerplate configuration comparisons with Command Service Module 2TV-1 and 101 were performed by North American. The NASA Review Board decided on February 5, 1967, that the boilerplate configuration had determined a reasonable "worst case" configuration, after more than 1,000 tests were performed.[20] See BP-1224 photo set.
- BP-1227
Details regarding this test capsule are not clear, but most likely it was lost at sea somewhere between the Azores and the Bay of Biscay in early 1969, and recovered in June 1969 off Gibraltar by the Soviet fishing trawler 'Apatit' (possibly a Soviet spy ship disguised as such, which was commonplace during the Cold War),[21][22][23] transferred to the port of Murmansk in the Soviet Union, and returned to the US in September 1970 by the USCGC Southwind (WAGB-280).[24] It is now located in Grand Rapids, Michigan as a time capsule.[25] See BP-1227 photo or Google Street View image. The only certainties about this capsule are that it was returned to the United States at Murmansk early in September 1970 during a visit by the USCG Southwind who returned it to the Naval Air Station, Norfolk, Virginia. There it remained until title was passed to the Smithsonian in April 1976 when it was passed on to Grand Rapids, Michigan to serve as a time capsule. Two official sources – the US Navy and the US Coastguard – both say that it was lost by an ARRS (Aerospace Rescue and Recovery Squadron) unit training in recovery procedures. A contemporary account of its return quotes a NASA spokesman as saying, “ … as far as NASA can determine the object… the Navy lost two years ago.”. When BP-1227 was lost ranges from 1968 to 1970 depending on which account one reads. This uncertainty may be due to a Russian account that claims there is an agreement between the Russians and the US to keep details secret until 2021.
Space Shuttle OV-101 in boilerplate configuration
First in March 1978 at the Marshall Space Flight Center[26] and then again in June 1979,[27] the Space Shuttle Enterprise was fitted together with an external tank and two inert solid rocket motors in a test-bed or boilerplate configuration. The STS-1 preliminary mission test program consisted of vibration tests in a horizontal mode at the Marshall Center, and then in a vertical launch configuration on Launch Pad 39A[28] at Kennedy Space Center, Florida. In 1985, the boilerplate configuration was used to test the Air Force shuttle facilities at Vandenberg Air Force Base, including a full mating on the SLC-6 launch pad.
Orion boilerplate
Lua error in package.lua at line 80: module 'strict' not found.
Ares launch vehicles
NASA’s future space flights to the Moon were planned for 2015. These flights were to be based upon the Orion spacecraft and its Ares launch vehicle. The Shuttles were retired in 2011. The Orion boilerplates were planned to be used between 2008 and 2014 with the Ares I and the heavy-lift Ares V launch vehicles, both of which were slated to launch initially from NASA’s Pad 39B site at the Kennedy Space Center in Florida.
Development
The construction of the first Orion boilerplate,[29] will be a basic mockup prototype to test the assembling sequences and launch procedures at NASA’s Langley Research Center while Lockheed aerospace engineers assemble the first rocket motors for the spacecraft’s escape tower. The first boilerplate will go to Dryden Flight Research Center at Edwards, California, for integration of Lockheed's avionics and NASA's developmental flight instrumentation[30] prior to shipment to New Mexico’s White Sands Missile Range for the first Orion pad abort test (PA-1) in 2009. On November 20, 2008 a complete test of the abort rockets took place in Utah.[31] PA-1 is the first of the six test events in Orion Abort Flight Test subproject. Lockheed Martin Corp. was awarded the contract to build Orion on Aug. 31, 2006.
Other boilerplates will be used to test thermal, electromagnetic, audio, mechanical vibration conditions and research studies. These tests for the Orion spacecraft will be done at Plum Brook Station in the agency’s Ohio-based Glenn Research Center. The first boilerplate Orions will launched/tested as early as 2008.[32][33]
Pathfinder
On March 2, 2009, the LAS Pathfinder began its transfer from the Langley Research Center to the White Sands Missile Range, for first PA-1 launch tests. Pathfinder is the combination of the Orion boilerplate and the LAS module.[34]
Post-landing Orion Recovery Test (PORT)
On March 23, 2009 a Navy-built Orion boilerplate began the PORT Tests in Navy test facilities and then sea testing near the Kennedy Space Center.[35]
Photos
|
Project Constellation
The Orion-Ares configuration was part of NASA's Project Constellation. This project's plan was to send humans to the Moon, Mars, and other destinations in the solar system. Its base components were to have consisted of the Launch Abort System, the Crew Module, the Service Module, and the Spacecraft Adapter.
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Commercial spacecraft boilerplates
Lua error in package.lua at line 80: module 'strict' not found. In the 2010s, several commercially-designed space capsules used boilerplate units on the initial launches of new launch vehicles.
- the Dragon Spacecraft Qualification Unit was a boilerplate unit launched to orbit on the maiden flight of the SpaceX Falcon 9 rocket, on June 4, 2010. It was built to the outer mold line (OML) and mass distribution of the Dragon spacecraft.[36]
- the Cygnus Mass Simulator was a boilerplate capsule launched to orbit on the maiden flight of the Orbital Sciences Corporation Antares rocket on April 21, 2013. It was built to outer mold line and mass distribution of the Cygnus spacecraft.[37][38]
See also
- Project Mercury
- Project Gemini
- Project Apollo
- Space Shuttle Pathfinder
- Orion Abort Test Booster
- Battleship (rocketry)
References
- ↑ NASA Mercury History Sections #44 and #47
- ↑ Mercury Project Boilerplates and Little Joe Rockets with Boilerplates
- ↑ i.e. sheet steel typically used to manufacture boilers
- ↑ Mercury Boilerplate Tests
- ↑ NASA History Archives
- ↑ NASA History Chronology
- ↑ 7.0 7.1 Astronautix Chronology - Quarter 1 1961
- ↑ Field Guide to American Spacecraft
- ↑ 9.0 9.1 9.2 9.3 NASA History Apollo
- ↑ 10.00 10.01 10.02 10.03 10.04 10.05 10.06 10.07 10.08 10.09 10.10 10.11 10.12 10.13 10.14 10.15 10.16 10.17 LJSC: APOLLO/SKYLAB ASTP AND SHUTTER ORIBTER MAMOR END ITEMS, Final Report, March, 1978
- ↑ 11.0 11.1 11.2 11.3 NASA Apollo History Vol. IV
- ↑ Long Beach Press Telegram article 7/16/2008
- ↑ Little Joe II Mission A-003 / BP-22 - April 1965 (PDF)
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Charles A. Biggs, Sr., Chief, Special Activities Section, Special Event Office, Johnson Space Center, Houston, TX, letter dated July 1, 1975. Files of Wings Museum, Denver, CO.
- ↑ Wings Over the Rockies Air & Space Museum Official Site
- ↑ Lance Barber, Curator of Military Aircraft, Wings Over the Rockies Air & Space Museum, Denver, CO.
- ↑ Smithsonian NASM: Apollo Boilerplate
- ↑ Smithsonian National Air and Space Museum BP-1228 Photo. Archived December 10, 2006 at the Wayback Machine
- ↑ NASA: Apollo BP-1224
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Current Location
- ↑ NASA Marshall Space Flight Center: Enterprise Boilerplate Tests
- ↑ NASA Kennedy Space Center: Enterprise on Launch Pad 39A
- ↑ NASA: OV-101 Vertical Tests
- ↑ NASA: Orion mockup
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ NASA: Constellation Abort Test Nov 2008
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ A Spiral Stairway to the Moon and Beyond
- ↑ NASA Orion LAS Pathfinder
- ↑ NASA Orion PORT Test
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- MSNBC: Orion Boilerplate Story(updated: 10:11 a.m. MT, Wed., March. 21, 2007)
- BusinessTech: Orion-Ares Story(posted: 6 September 2006 10:41 am ET)
- NASA Apollo History Archives
- Smithsonian NASM: List of Apollo Boilerplates, missions, and launch vehicles
External links
- NASA Official Site
- White Sands Missile Range Official Site
- AAIA: Orion Boilerplate
- NASA Spaceflight: MLAS - the alternative Orion Launch Abort System gains momentum (Orion boilerplate being developed)
- HobbySpace: BP-6 now in California
- List of Mercury Boilerplates
- Orion Boilerplate