Quebec City–Windsor Corridor (Via Rail)

From Infogalactic: the planetary knowledge core
(Redirected from Corridor (Via Rail))
Jump to: navigation, search
The Corridor
300px
A Via Rail train approaching Belleville station
Overview
Type Inter-city rail
System Via Rail
Locale Quebec City–Windsor Corridor
Termini Lua error in package.lua at line 80: module 'strict' not found., Lua error in package.lua at line 80: module 'strict' not found., Lua error in package.lua at line 80: module 'strict' not found.
Lua error in package.lua at line 80: module 'strict' not found.
Stations Lua error in package.lua at line 80: module 'strict' not found., Lua error in package.lua at line 80: module 'strict' not found., Lua error in package.lua at line 80: module 'strict' not found., Lua error in package.lua at line 80: module 'strict' not found., Lua error in package.lua at line 80: module 'strict' not found., Lua error in package.lua at line 80: module 'strict' not found., Lua error in package.lua at line 80: module 'strict' not found.
Ridership 4,782,493 (FY 2019)[1]
Website viarail.ca/corridor
Operation
Opened 1856
Owner Canadian National, CPKC Railway, Metrolinx, Via Rail
Operator(s) Via Rail
Technical
Track gauge 1,435 mm (4 ft 8 12 in) standard gauge
Operating speed 160 km/h (100 mph)
Route map
CorridorVia.svg
Via routes in "The Corridor"
0km Windsor
69km Chatham
0km Sarnia
22km Wyoming
124km Glencoe
63km Strathroy
174km
95km
London
185km
195km
to
205km Ingersoll
130km St. Marys
147km Stratford
219km Woodstock
189km Kitchener
262km Brantford
211km Guelph
74km
end
44km Grimsby
19km St. Catharines GO
Highway 406
Queen Elizabeth Way
1km Niagara Falls GO
0 km Niagara River
Maple Leaf to New York City
303km Aldershot GO
240km Georgetown GO
256km Brampton GO
Highway 401
325km Oakville GO
Queen Elizabeth Way
290km
end
359km
0km
Toronto GO TTC UPX
254km to
21km Guildwood GO
51km Oshawa GO
101km Port Hope
113km Cobourg
163km Trenton Junction
182km Belleville
217km Napanee
254km Kingston
285km to
290km Gananoque
335km Brockville
380km Smiths Falls
430km Fallowfield OCT
446km Ottawa OCT
493km Casselman
428km Cornwall
533km Alexandria
Ontario
Quebec
border
476km Coteau
Ottawa River West Channel
Ottawa River East Channel
520km Dorval AMT
539km Montreal
272km to
Saint Lawrence River
545km Saint-Lambert AMT
Richelieu River
592km Saint-Hyacinthe
639km Drummondville
785km Charny
Saint Lawrence River
790km Sainte-Foy
811km Quebec City

The Quebec City–Windsor Corridor (French: Ligne de Québec à Windsor), also known as simply the Corridor, is a Via Rail passenger train service in the Canadian provinces of Quebec and Ontario. The Corridor service area has the heaviest passenger train frequency in Canada and contributes 67% of Via's revenue.

History

Prior to Via's formation in 1978, CN Rail operated its passenger trains, branded Rapido, on the same tracks and CP Rail (now CPKC) also offered limited service.

High-speed proposal

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

During the 1970s and early 1980s, CN and later Via Rail operated the Turbo Train on existing freight rail trackage. This equipment was later replaced by the Bombardier LRC (Light, Rapid, Comfortable) train sets. Beginning in the 1980s and through the 1990s, Via Rail, Bombardier and the provincial and federal governments studied the feasibility of establishing a dedicated high-speed passenger rail network linking Quebec City–Montreal–Ottawa–Toronto–Windsor similar to the French TGV as a means of reducing domestic air and highway travel between these destinations.

After a hiatus of ten years, a feasibility study on launching a high-speed rail service in the Corridor will be updated at the joint cost of the federal government, Ontario and Quebec.[2] On November 14, 2011, the three governments officially released the final report of a high-speed rail study for this corridor.[3]

2009–2010 improvements

In 2009–2010, Via used CA$300 million of government stimulus money to upgrade segments of the Corridor. Notable track improvements were 70 km (43 mi) of additional third main track in four segments, and a short segment of fourth main track, as well as additional yard tracks at three locations. Improvements were made to several stations along the line, with new station buildings constructed at Belleville and Cobourg, and additional platforms for existing stations at Brockville and Oshawa. The improvements were planned to reduce delays along the route and to allow for a reduction in travel time of up to 30 minutes from end to end. They were intended to allow Via to introduce two new round-trip trains from Toronto to both Montreal and Ottawa without requiring the acquisition of new equipment.[4]

Service

Inter-city rail

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Inter-city service along the Corridor is provided by several different routes connecting the different cities served by the service. There is no single route that travels the entire length of the Corridor from Windsor to Quebec City. Via runs a mix of local-service and express trains in the Corridor. The Corridor service area has the heaviest passenger train frequency in Canada, with 36 Via trains traversing the route daily.[4] About 67% of Via's revenue comes from Corridor routes.

Via trains that start and end within the geographic region of the Quebec City–Windsor Corridor are branded as a part of the Corridor service. Other inter-city trains from outside the Corridor may have their terminus at stations in the Corridor, such as the Canadian and the Ocean, but are marketed by their respective train names and are not considered to be Corridor services.

The Maple Leaf, a through service from Toronto to New York City, operated jointly with Amtrak, is crewed by Via as trains 97 and 98 on VIA schedules, between Toronto and Niagara Falls, and can be considered part of Corridor services as well. It is the only scheduled rail service from the Corridor line from Burlington to Niagara Falls.

Commuter rail

A GO Transit train on the main line in Toronto's west end

Two commuter rail agencies, GO Transit and Exo, share tracks with Via's Corridor trains. Both agencies are provincially funded and independent of Via.

Trackage

Most of the trackage that Via trains use along the Corridor is owned by the Canadian National Railway. Via owns three former freight lines long the Corridor, one from Smiths Falls to Coteau-du-Lac, Quebec, via Ottawa; one from Smiths Falls to Brockville; and one from Chatham, Ontario, to Windsor, Ontario.[5] Via Corridor trains run on three segments of tracks owned by Metrolinx; one from Burlington, Ontario, to Pickering, Ontario; one from Toronto Union Station to Malton, Mississauga; and one from Georgetown, Ontario, to Kitchener, Ontario.[5] The proposed High Frequency Rail plan calls for adding Corridor services between Toronto and Quebec City that run on newly constructed dedicated tracks.[6]

Future

On July 6, 2021, Transportation Minister Omar Alghabra announced that the federal government would launch the procurement process to build a high-frequency rail corridor between Toronto and Quebec City by 2030.[6] The cost of the project is expected to be between CA$6 billion and CA$12 billion. The plan is to have trains travel up to 200 km/h (125 mph) on a line that would run from Toronto to Quebec City through Peterborough, Ottawa, Montreal, Laval, and Trois-Rivières.[6] As opposed to current operations along the Corridor, the trains would run on dedicated passenger tracks, improving service reliability since the trains would not have to compete with freight trains.[7] Service reliability could increase to 95 percent, up significantly from its current 67 percent.[6] Travel times are projected to decrease by 90 minutes on some routes, such as between Ottawa and Toronto. 90 percent of the route is planned to run on electricity.[7] The timing of the announcement was criticized as political, since there was speculation of a federal election being held later in the year, which was later confirmed on August 15.[6]

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.[dead link]
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
  6. 6.0 6.1 6.2 6.3 6.4 Lua error in package.lua at line 80: module 'strict' not found.
  7. 7.0 7.1 Lua error in package.lua at line 80: module 'strict' not found.

External links