Dutton Viaduct
Dutton Viaduct | |
---|---|
![]() Dutton Viaduct
|
|
Coordinates | Lua error in package.lua at line 80: module 'strict' not found. |
Carries | West Coast Main Line |
Crosses | River Weaver |
Locale | Dutton, Cheshire |
Heritage status | Grade II* listed |
Characteristics | |
Total length | 500 yards (457 m) |
Clearance below | 60 feet (18 m) |
History | |
Opened | 1837 |
Statistics | |
Toll | None |
Dutton Viaduct is a railway viaduct on the West Coast Main Line where it crosses the River Weaver and the Weaver Navigation between the villages of Dutton and Acton Bridge in Cheshire, England (grid reference SJ581764), near Dutton Horse Bridge. It is recorded in the National Heritage List for England as a designated Grade II* listed building.[1]
The viaduct was built during 1836 and was completed on 9 December of that year. It was the longest viaduct on the Grand Junction Railway (GJR) [2] and is an early example of a major railway viaduct. Its cost was £54,440 (equivalent to £4,580,000 in 2021).[3] The engineers were Joseph Locke and George Stephenson.[1] The contractor was William Mackenzie. It was the first project for which Thomas Brassey submitted a tender but Mackenzie's estimate was £5,000 lower.[4] It is built in red sandstone and has 20 arches. The base of the viaduct pillars are splayed to give greater stability and 700,000 cubic feet (20,000 m3) of stone was used in its construction. The first GJR trains to carry passengers across the viaduct were run on 4 July 1837.[2] Steel masts were added in the 1960s for electrification.[1] The viaduct is 60 feet (18 m) high and 500 yards (457 m) long.[5]
See also
- Grade II* listed buildings in Cheshire West and Chester
- Listed buildings in Acton Bridge
- Listed buildings in Dutton, Cheshire
References
- ↑ 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ UK Retail Price Index inflation figures are based on data from Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.