HMS Emperor (D98)

For other ships with the same name, see USS Pybus and HMS Emperor.

HMS Emperor
History
United States
Name:	USS Pybus
Builder:	Seattle-Tacoma Shipbuilding Corporation
Laid down:	23 June 1942
Launched:	7 October 1942
Commissioned:	31 May 1943
Decommissioned:	6 August 1943
Identification:	AVG-34 ACV-34 CVE-34
Fate:	Transferred to Royal Navy
United Kingdom
Name:	HMS Emperor
Commissioned:	6 August 1943
Decommissioned:	28 March 1946
Identification:	D98
Fate:	Returned to US, sold for scrap 1946
General characteristics
Class & type:	Bogue-class escort carrier (USA) Ruler-class escort carrier (UK)
Displacement:	15,126 tons (full load)
Length:	492 ft (150 m)
Beam:	69 ft 6 in (21.18 m)
Draught:	26 ft 3 in (8.00 m)
Propulsion:	Steam turbines, 1 shaft, 8,500 shp (6,300 kW)
Speed:	16.5 knots (30.6 km/h; 19.0 mph)
Complement:	646 officers and men
Armament:	2 × 5 in (127 mm) guns
Aircraft carried:	24
Service record
Operations:	Operation Tungsten (1944) Operation Overlord (1944) Operation Dragoon (1944) Operation Tiderace (1945)

USS Pybus (CVE-34) was initially a United States Navy Bogue-class escort carrier. The ship was transferred to the United Kingdom for service in the Royal Navy as the Ruler-class escort carrier HMS Emperor (D98) as part of the Lend-Lease program of World War II. Entering service in 1943, the ship took part in operations against the German battleship Tirpitz and the invasions of Normandy and southern France. Returned to the United States following the war, the carrier was sold for scrap in 1946.

Design and description

The Bogue class were all larger and had a greater aircraft capacity than all the preceding American built escort carriers. They were also all laid down as escort carriers and not converted merchant ships. All the ships had a complement of 646 and an overall length of 492 feet 3 inches (150.0 m), a beam of 69 feet 6 inches (21.2 m) and a draught of 25 ft 6 in (7.8 m). Propulsion was provided a steam turbine, two boilers connected to one shaft giving 9,350 shaft horsepower (6,970 kW), which could propel the ship at 16.5 knots (30.6 km/h; 19.0 mph).

Aircraft facilities were a small combined bridge–flight control on the starboard side, two aircraft lifts 43 feet (13.1 m) by 34 feet (10.4 m), one aircraft catapult and nine arrestor wires. Aircraft could be housed in the 260 feet (79.2 m) by 62 feet (18.9 m) hangar below the flight deck. Armament comprised two 4-inch (102 mm)/50 caliber dual purpose guns in single mounts, sixteen 40 mm Bofors anti-aircraft guns in twin mounts and twenty 20 mm Oerlikon anti-aircraft cannons in single mounts. They had a maximum aircraft capacity of twenty-four aircraft which could be a mixture of Grumman Martlet, Grumman F6F Hellcat, Vought F4U Corsair or Hawker Sea Hurricane fighter aircraft and Fairey Swordfish or Grumman Avenger anti-submarine aircraft.

Construction and career

F6F Hellcats aboard HMS Emperor, 4 April 1944

Pybus, originally designated AVG-34, was laid down on 23 June 1942 as MC Hull No. 245 by Seattle-Tacoma Shipbuilding, Washington. Reclassified as ACV-34 on 20 August 1942, the ship was launched on 7 October 1942 and commissioned into the United States Navy on 31 May 1943 at the Puget Sound Navy Yard, Washington. Pybus was reclassified as CVE-34 on 15 July 1943 and assigned for transfer to the United Kingdom under the Lend-Lease agreement.

Pybus reported for duty with the Pacific Fleet after shakedown, in a temporary status, before she decommissioned on 6 August 1943 at New York. She was accepted that day by the UK and placed in service as HMS Emperor with the pennant number D98. During her British service, she helped provide fighter cover for airstrikes on Tirpitz, served on anti-submarine detail during Operation Overlord, and helped support the invasion of Southern France (Operation Dragoon).

Following the war, Emperor was returned to the United States Navy on 12 February 1946, struck from the Naval Vessel Register on 28 March 1946, and sold 14 May to Patapsco Scrap Co., Baltimore, Maryland for scrapping.