HMS Strongbow (1916)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

History
United Kingdom
Name: HMS Strongbow
Builder: Yarrow Shipbuilders, Glasgow
Launched: 30 September 1916
Fate: Sunk 17 October 1917
General characteristics
Class & type: R-class destroyer
Displacement: 930 long tons (940 t)
Length: 273 ft 6 in (83.36 m)
Beam: Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value).
Draught: 9 ft (2.7 m)
Propulsion:
  • 3 boilers
  • 2 Parsons direct drive steam turbines, 27,000 shp (20,000 kW)
Speed: 36 knots (41.4 mph; 66.7 km/h)
Complement: 82
Armament:

HMS Strongbow was an R-class destroyer built for the British Royal Navy during the First World War. The ship was launched in September 1916 and entered service in November that year. Stongbow was sunk on 17 October 1917 by the German minelayers SMS Bremse and Brummer when escorting a convoy of merchant ships from Norway.

Construction and design

HMS Strongbow was ordered from Yarrow Shipbuilders in July 1915 as part of the Sixth War Programme of shipbuilding for the Royal Navy.[1] Strongbow was built as a Yarrow "special", to Yarrow's own design rather than to the Admiralty's own design for the R-class destroyer. Yarrow's design used direct-drive steam turbines rather than the geared turbines of the Admiralty design, and had two funnels rather than three. As such, they more closely resembled Yarrow M-class Specials,[2][3] and are referred to as Yarrow M-class ships in some sources.[4][5][6]

Strongbow's hull was 273 feet 6 inches (83.36 m) long overall, with a beam of Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value). and a draught of 9 feet (2.74 m). Displacement was 930 long tons (940 t).[3] Three Yarrow boilers fed Parsons turbines, driving two propeller shafts and generating 27,000 shaft horsepower (20,000 kW). This gave a speed of 36 knots (67 km/h; 41 mph). Armament consisted of three QF Mark IV 4 inch (102 mm) guns, with a single 2-pounder (40-mm) "pom-pom" anti-aircraft gun and four 21 inch (533 mm) torpedo tubes. The ship had a crew of 82 officers and men.[3]

Strongbow was launched from Yarrow's Glasgow shipyard on 30 September 1916 and was completed in November that year.[1]

Service

Following commissioning, Strongbow joined the Twelfth Destroyer Flotilla of the Grand Fleet,[7] with the pennant number G.44.[8] Strongbow was one of eight destroyers detached to Lerwick in the Shetland Islands, with the duty of escorting the regular convoys from Scandinavia to the United Kingdom.[9]

On 16 October 1917, Strongbow joined a westbound convoy of 12 merchant ships from Norway. The escort consisted of Strongbow, the destroyer Mary Rose and two naval trawlers. In the morning of 17 October, the convoy was attacked by two German light cruisers, the Bremse and Brummer, about 70 miles (110 km) east of Lerwick. Strongbow sighted two unknown ships at 06:00, in poor visibility, and believing them to be Royal Navy cruisers, challenged them with recognition signals. Strongbow, receiving inadequate responses, had not yet cleared for action when the two German cruisers opened fire at a range of about 3,000 yards (2,700 m). Strongbow quickly received heavy damage and was immobilised, and after ensuring that all confidential papers had been destroyed, the captain ordered the surviving crew to abandon ship. Mary Rose, which had been ahead of the convoy, and only realised that the convoy was under attack when her crew heard gunfire, was also quickly sunk, as were nine of the merchant vessels. Neither destroyer managed to make a radio report of the attack, and the two German cruisers escaped unscathed.[9][10] Forty-six of Strongbow's crew were killed in the attack.[11]

Notes

  1. 1.0 1.1 Friedman 2009, p. 310.
  2. Friedman 2009, p. 157.
  3. 3.0 3.1 3.2 Gardiner and Gray 1985, p. 81.
  4. Dittmar and Colledge 1972, pp. 67–68.
  5. Manning 1961, pp. 69–70.
  6. Moore 1990, p. 70.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Dittmar and Colledge 1972, p. 68.
  9. 9.0 9.1 Lua error in package.lua at line 80: module 'strict' not found.
  10. Massie 2007, p. 747.
  11. Lua error in package.lua at line 80: module 'strict' not found.

References

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.