Intel 1103
DRAM memory cell of Intel i1103 chip
|
|
| Media type | 10 μm p-MOS DRAM |
|---|---|
| Capacity | 1 Kilobit |
| Standard | 18-pin DIP |
| Developed by | Intel |
| Usage | HP 9800 series,[1] PDP-11[2] and others |
The 1103 is a dynamic random-access memory (DRAM) integrated circuit (IC) developed and fabricated by Intel. Introduced in October 1970, the 1103 was the first commercially available DRAM IC; and due to its small physical size and low price relative to magnetic-core memory, it replaced the latter in many applications.[3][4] While it was introduced in 1970, initial production yields were poor, and it was not until the fifth stepping of the production masks that it became available in large quantities during 1971.
Development
Some time in 1969, William Regitz and his colleagues at Honeywell invented a three-transistor dynamic memory cell and began to canvass the semiconductor industry for a producer. The recently founded Intel Corporation responded and developed the 1024-bit chip numbered i1102 designed by Joel Karp, working closely with William Regitz.[5]
Technical Details
| tRWC | 580 ns | Random read or write cycle time (from one +ve Precharge edge to the next) |
| tPO | 300 ns | Access time: Precharge High to valid data out |
| tREF | 2 ms | Refresh time |
| VCC | 16 V | Supply voltage |
| p-MOS | 10 µm | Production process (silicon gate MOSFET) |
| Capacity | 1024x1 | Capacity x bus width |
References
- ↑ TimeToast Evolution of Educational Technology
- ↑ EK-11045-MM-007.pdf
- ↑ Jacob, Bruce et al. (2008). Memory Systems: Cache, DRAM, Disk. Morgan Kaufmann Publishers. pp. 457–458.
- ↑ Mary Bellis, The Invention of the Intel 1103
- ↑ Computer History Museum: "Oral History of Joel Karp" Interviewed by Gardner Hendrie March 3, 2003 | Atherton, California
