Intel Core (microarchitecture)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

This article is about the Intel microarchitecture. For Intel processors branded as Intel Core, see Intel Core.
Intel Core
Intel Core 2 Quad.png
L1 cache 64 kB per core
L2 cache 1 MB to 8 MB unified
L3 cache 8 MB to 16 MB shared (Xeon)
Model Celeron Series
Created 2006
Transistors 105M 65 nm (A1, M0)
Architecture Intel Core x86
Instructions MMX
Extensions
Socket(s)
Predecessor Enhanced Pentium M
Successor Penryn (tick)
Nehalem (tock)

The Intel Core microarchitecture (previously known as the Next-Generation Micro-Architecture) is a multi-core processor microarchitecture unveiled by Intel in Q1 2006. It is based on the Yonah processor design and can be considered an iteration of the P6 microarchitecture, introduced in 1995 with Pentium Pro. The high power consumption and heat intensity, the resulting inability to effectively increase clock speed, and other shortcomings such as the inefficient pipeline were the primary reasons for which Intel abandoned the NetBurst microarchitecture and switched to completely different architectural design, delivering high efficiency through a small pipeline rather than high clock speeds. The Core microarchitecture never reached the clock speeds of the Netburst microarchitecture, even after moving to 45 nm lithography.

The first processors that used this architecture were code-named 'Merom', 'Conroe', and 'Woodcrest'; Merom is for mobile computing, Conroe is for desktop systems, and Woodcrest is for servers and workstations. While architecturally identical, the three processor lines differ in the socket used, bus speed, and power consumption. Mainstream Core-based processors are branded Pentium Dual-Core or Pentium and low end branded Celeron; server and workstation Core-based processors are branded Xeon, while desktop and mobile Core-based processors are branded as Core 2. Despite their names, processors sold as Core Solo/Core Duo and Core i3/i5/i7 do not actually use the Core microarchitecture and are based on the Enhanced Pentium M and newer Nehalem/Sandy Bridge/Haswell/Skylake microarchitectures, respectively.

Features

The Core microarchitecture returned to lower clock rates and improved the usage of both available clock cycles and power when compared with the preceding NetBurst microarchitecture of the Pentium 4/D-branded CPUs.[1] The Core microarchitecture provides more efficient decoding stages, execution units, caches, and buses, reducing the power consumption of Core 2-branded CPUs while increasing their processing capacity. Intel's CPUs have varied widely in power consumption according to clock rate, architecture, and semiconductor process, shown in the CPU power dissipation tables.

Like the last NetBurst CPUs, Core based processors feature multiple cores and hardware virtualization support (marketed as Intel VT-x), as well as Intel 64 and SSSE3. However, Core-based processors do not have the Hyper-Threading Technology found in Pentium 4 processors. This is because the Core microarchitecture is a descendant of the P6 microarchitecture used by Pentium Pro, Pentium II, Pentium III, and Pentium M.

The L1 cache size was enlarged in the Core microarchitecture, from 32 KB on Pentium II/III (16 KB L1 Data + 16 KB L1 Instruction) to 64 KB L1 cache/core (32 KB L1 Data + 32 KB L1 Instruction) on Pentium M and Core/Core 2. It also lacks an L3 Cache found in the Gallatin core of the Pentium 4 Extreme Edition, although an L3 Cache is present in high-end versions of Core-based Xeons. Both an L3 cache and Hyper-threading were reintroduced in the Nehalem microarchitecture.

Roadmap

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Main article: Intel Tick-Tock

Technology

While the Core microarchitecture is a major architectural revision it is based in part on the Pentium M processor family designed by Intel Israel.[2] The Penryn pipeline is 12–14 stages long[3] — less than half of Prescott's, a signature feature of wide order execution cores. Penryn's successor, Nehalem borrowed more heavily from the Pentium 4 and has 20-24 pipeline stages.[3] Core's execution unit is 4 issues wide, compared to the 3-issue cores of P6, Pentium M, and 2-issue cores of NetBurst microarchitectures. The new architecture is a dual core design with linked L1 cache and shared L2 cache engineered for maximum performance per watt and improved scalability.

One new technology included in the design is Macro-Ops Fusion, which combines two x86 instructions into a single micro-operation. For example, a common code sequence like a compare followed by a conditional jump would become a single micro-op. Unfortunately, this technology does not work in 64-bit mode.

Other new technologies include 1 cycle throughput (2 cycles previously) of all 128-bit SSE instructions and a new power saving design. All components will run at minimum speed, ramping up speed dynamically as needed (similar to AMD's Cool'n'Quiet power-saving technology, as well as Intel's own SpeedStep technology from earlier mobile processors). This allows the chip to produce less heat, and consume as little power as possible.

Intel Core microarchitecture.

For most Woodcrest CPUs, the front side bus (FSB) runs at 1333 MT/s; however, this is scaled down to 1066 MT/s for lower end 1.60 and 1.86 GHz variants.[4][5] The Merom mobile variant was initially targeted to run at a FSB of 667 MT/s while the second wave of Meroms, supporting 800 MT/s FSB, were released as part of the Santa Rosa platform with a different socket in May 2007. The desktop-oriented Conroe began with models having an FSB of 800 MT/s or 1066 MT/s with a 1333 MT/s line officially launched on July 22, 2007.

The power consumption of these new processors is extremely low—average use energy consumption is to be in the 1–2 watt range in ultra low voltage variants, with thermal design powers (TDPs) of 65 watts for Conroe and most Woodcrests, 80 watts for the 3.0 GHz Woodcrest, and 40 watts for the low-voltage Woodcrest. In comparison, an AMD Opteron 875HE processor consumes 55 watts, while the energy efficient Socket AM2 line fits in the 35 watt thermal envelope (specified a different way so not directly comparable). Merom, the mobile variant, is listed at 35 watts TDP for standard versions and 5 watts TDP for Ultra Low Voltage (ULV) versions.[citation needed]

Previously, Intel announced that it would now focus on power efficiency, rather than raw performance. However, at IDF in the spring of 2006, Intel advertised both. Some of the promised numbers were:

  • 20% more performance for Merom at the same power level (compared to Core Duo)
  • 40% more performance for Conroe at 40% less power (compared to Pentium D)
  • 80% more performance for Woodcrest at 35% less power (compared to the original dual-core Xeon)

Processor cores

The processors of the Core microarchitecture can be categorized by number of cores, cache size, and socket; each combination of these has a unique code name and product code that is used across a number of brands. For instance, code name "Allendale" with product code 80557 has two cores, 2 MB L2 cache and uses the desktop socket 775, but has been marketed as Celeron, Pentium, Core 2 and Xeon, each with different sets of features enabled. Most of the mobile and desktop processors come in two variants that differ in the size of the L2 cache, but the specific amount of L2 cache in a product can also be reduced by disabling parts at production time. Wolfdale-DP and all quad-core processors except Dunnington QC are multi-chip modules combining two dies. For the 65 nm processors, the same product code can be shared by processors with different dies, but the specific information about which one is used can be derived from the stepping.

fab cores Mobile Desktop, UP Server CL Server DP Server MP Server
Single-Core 65 nm 65 nm 1 Merom-L
80537		 Conroe-L
80557
Single-Core 45 nm 45 nm 1 Penryn-L
80585		 Wolfdale-CL
80588
Dual-Core 65 nm 65 nm 2 Merom-2M
80537		 Merom
80537		 Allendale
80557		 Conroe
80557		 Conroe-CL
80556		 Woodcrest
80556		 Tigerton-DC
80564
Dual-Core 45 nm 45 nm 2 Penryn-3M
80577		 Penryn
80576		 Wolfdale-3M
80571		 Wolfdale
80570		 Wolfdale-CL
80588		 Wolfdale-DP
80573
Quad-Core 65 nm 65 nm 4 Kentsfield
80562		 Clovertown
80563		 Tigerton
80565
Quad-Core 45 nm 45 nm 4 Penryn-QC
80581		 Yorkfield-6M
80580		 Yorkfield
80569		 Yorkfield-CL
80584		 Harpertown
80574		 Dunnington QC
80583
Six-Core 45 nm 45 nm 6 Dunnington
80582

Conroe/Merom (65 nm)

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Main article: Conroe (microprocessor)

The original Core 2 processors are based around the same dies that can be identified as CPUID Family 6 Model 15. Depending on their configuration and packaging, their code names are Conroe (LGA 775, 4 MB L2 cache), Allendale (LGA 775, 2 MB L2 cache), Merom (Socket M, 4 MB L2 cache) and Kentsfield (Multi-chip module, LGA 775, 2x4MB L2 cache). Merom and Allendale processors with limited features can be found in Pentium Dual Core and Celeron processors, while Conroe, Allendale and Kentsfield also are sold as Xeon processors.

Additional code names for processors based on this model are Woodcrest (LGA 771, 4 MB L2 cache), Clovertown (MCM, LGA 771, 2×4MB L2 cache) and Tigerton (MCM, Socket 604, 2×4MB L2 cache), all of which are marketed only under the Xeon brand.

Processor Brand name Model (list) Cores L2 Cache Socket TDP
Merom-2M Mobile Core 2 Duo U7xxx 2 2 MiB BGA479 10 W
Merom L7xxx 4 MiB 17 W
Merom
Merom-2M		 T5xxx
T7xxx		 2–4 MiB Socket M
Socket P
BGA479		 35 W
Merom Mobile Core 2 Extreme X7xxx 2 4 MiB Socket P 44 W
Merom Celeron M 5x0 1 1 MiB Socket M
Socket P		 30 W
Merom-2M 5x5 Socket P 31 W
Merom-2M Celeron Dual-Core T1xxx 2 512–1024 KiB Socket P 35 W
Merom-2M Pentium Dual-Core T2xxx
T3xxx		 2 1 MiB Socket P 35 W
Allendale Xeon 3xxx 2 2 MB LGA 775 65 W
Conroe 3xxx 2–4 MB
Conroe and
Allendale		 Core 2 Duo E4xxx 2 2 MB LGA 775 65 W
E6xx0 2–4 MB
Conroe-CL E6xx5 2–4 MB LGA 771
Conroe-XE Core 2 Extreme X6xxx 2 4 MB LGA 775 75 W
Allendale Pentium Dual-Core E2xxx 2 1 MB LGA 775 65 W
Allendale Celeron E1xxx 2 512 kB LGA 775 65 W
Kentsfield Xeon 32xx 4 2×4 MiB LGA 775 95–105 W
Kentsfield Core 2 Quad Q6xxx 4 2×4 MiB LGA 775 95–105 W
Kentsfield XE Core 2 Extreme QX6xxx 4 2×4 MiB LGA 775 130 W
Woodcrest Xeon 51xx 2 4 MB LGA 771 65–80 W
Clovertown L53xx 4 2×4 MB LGA 771 40–50 W
E53xx 80 W
X53xx 120–150 W
Tigerton-DC E72xx 2 2×4 MB Socket 604 80 W
Tigerton L73xx 4 50 W
E73xx 2×2–2×4 MB 80 W
X73xx 2×4 MB 130 W

Conroe-L/Merom-L

The Conroe-L and Merom-L processors are based around the same core as Conroe and Merom, but only contain a single core and 1 MB of L2 cache, significantly reducing production cost and power consumption of the processor at the expense of performance compared to the dual-core version. It is used only in ultra-low voltage Core 2 Solo U2xxx and in Celeron processors and is identified as CPUID family 6 model 22.

Processor Brand name Model (list) Cores L2 Cache Socket TDP
Merom-L Mobile Core 2 Solo U2xxx 1 2 MiB BGA479 5.5 W
Merom-L Celeron M 5x0 1 512 KiB Socket M
Socket P		 27 W
Merom-L 5x3 512–1024 KiB BGA479 5.5–10 W
Conroe-L Celeron M 4x0 1 512 KiB LGA 775 35 W
Conroe-CL 4x5 LGA 771 65 W

Penryn/Wolfdale (45 nm)

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Main article: Penryn (microarchitecture)

In Intel's Tick-Tock cycle, the 2007/2008 "Tick" was the shrink of the Core microarchitecture to 45 nanometers as CPUID model 23. In Core 2 processors, it is used with the code names Penryn (Socket P), Wolfdale (LGA 775) and Yorkfield (MCM, LGA 775), some of which are also sold as Celeron, Pentium and Xeon processors. In the Xeon brand, the Wolfdale-DP and Harpertown code names are used for LGA 771 based MCMs with two or four active Wolfdale cores.

The chips come in two sizes, with 6 MB and 3 MB L2 cache. The smaller version is commonly called Penryn-3M and Wolfdale-3M as well as Yorkfield-6M, respectively. The single-core version of Penryn, listed as Penryn-L here, is not a separate model like Merom-L but a version of the Penryn-3M model with only one active core.

Processor Brand name Model (list) Cores L2 Cache Socket TDP
Penryn-L Core 2 Solo SU3xxx 1 3 MiB BGA956 5.5 W
Penryn-3M Core 2 Duo SU7xxx 2 3 MB BGA956 10 W
SU9xxx
Penryn SL9xxx 6 MiB 17 W
SP9xxx 25/28 W
Penryn-3M P7xxx 3 MiB Socket P
FCBGA6		 25 W
P8xxx
Penryn P9xxx 6 MiB
Penryn-3M T6xxx 2 MiB 35 W
T8xxx 3 MiB
Penryn T9xxx 6 MiB
E8x35 6 MiB Socket P 35-55 W
Penryn-QC Core 2 Quad Q9xxx 4 2x3-2x6 MiB Socket P 45 W
Penryn XE Core 2 Extreme X9xxx 2 6 MiB Socket P 44 W
Penryn-QC QX9xxx 4 2x6 MiB 45 W
Penryn-3M Celeron T3xxx 2 1 MiB Socket P 35 W
SU2xxx µFC-BGA 956 10 W
Penryn-L 9x0 1 1 MiB Socket P 35 W
7x3 µFC-BGA 956 10 W
Penryn-3M Pentium T4xxx 2 1 MiB Socket P 35 W
SU4xxx 2 MiB µFC-BGA 956 10 W
Penryn-L SU2xxx 1 5.5 W
Wolfdale-3M
Celeron E3xxx 2 1 MB LGA 775 65 W
Pentium E2210
E5xxx 2 MB
E6xxx
Core 2 Duo E7xxx 3 MB
Wolfdale E8xxx 6 MB
Xeon 31x0 45-65 W
Wolfdale-CL 30x4 1 LGA 771 30 W
31x3 2 65 W
Yorkfield Xeon X33x0 4 2×3–2×6 MB LGA 775 65–95 W
Yorkfield-CL X33x3 LGA 771 80 W
Yorkfield-6M Core 2 Quad Q8xxx 2×2 MB LGA 775 65–95 W
Q9x0x 2×3 MB
Yorkfield Q9x5x 2×6 MB
Yorkfield XE Core 2 Extreme QX9xxx 2×6 MB 130–136 W
QX9xx5 LGA 771 150 W
Wolfdale-DP Xeon E52xx 2 6 MB LGA 771 65 W
L52xx 20-55 W
X52xx 80 W
Harpertown E54xx 4 2×6 MB LGA 771 80 W
L54xx 40-50 W
X54xx 120-150 W

Dunnington

The Xeon "Dunnington" processor (CPUID Family 6, model 29) is closely related to Wolfdale but comes with six cores and an on-chip L3 cache and is designed for servers with Socket 604, so it is marketed only as Xeon, not as Core 2.

Processor Brand name Model (list) Cores L3 Cache Socket TDP
Dunnington Xeon E74xx 4-6 8-16 MB Socket 604 90 W
L74xx 4-6 12 MB 50-65 W
X7460 6 16 MB 130 W

Steppings

The Core microarchitecture uses a number of steppings, which unlike previous microarchitectures not only represent incremental improvements but also different sets of features like cache size and low power modes. Most of these steppings are used across brands, typically by disabling some of the features and limiting clock frequencies on low-end chips.

Steppings with a reduced cache size use a separate naming scheme, which means that the releases are no longer in alphabetic order. Additional steppings have been used in internal and engineering samples, but are not listed in the tables.

Many of the high-end Core 2 and Xeon processors use Multi-Chip Modules of two or three chips in order to get larger cache sizes or more than two cores.

Steppings using 65 nm process

Mobile (Merom) Desktop (Conroe) Desktop (Kentsfield) Server (Woodcrest, Clovertown, Tigerton)
Stepping Released Area CPUID L2 cache Max. clock Celeron Pentium Core 2 Celeron Pentium Core 2 Xeon Core 2 Xeon Xeon
B2 Jul 2006 143 mm² 06F6 4 MiB 2.93 GHz M5xx T5000 T7000 L7000 E6000 X6000 3000 5100
B3 Nov 2006 143 mm² 06F7 4 MiB 3.00 GHz Q6000 QX6000 3200 5300
L2 Jan 2007 111 mm² 06F2 2 MiB 2.13 GHz T5000 U7000 E2000 E4000 E6000 3000
E1 May 2007 143 mm² 06FA 4 MiB 2.80 GHz M5xx T7000 L7000 X7000
G0 Apr 2007 143 mm² 06FB 4 MiB 3.00 GHz M5xx T7000 L7000 X7000 E2000 E4000 E6000 3000 Q6000 QX6000 3200 5100 5300 7200 7300
G2 Mar 2009 143 mm² 06FB 4 MiB 2.16 GHz M5xx T5000 T7000 L7000
M0 Jul 2007 111 mm² 06FD 2 MiB 2.40 GHz 5xx T1000 T2000 T3000 T5000 T7000 U7000 E1000 E2000 E4000
A1 Jun 2007 81 mm² 10661 1 MiB 2.20 GHz M5xx U2000 220 4x0

Early ES/QS steppings are: B0 (CPUID 6F4h), B1 (6F5h) and E0 (6F9h).

Steppings B2/B3, E1 and G0 of model 15 (cpuid 06fx) processors are evolutionary steps of the standard Merom/Conroe die with 4 MiB L2 cache, with the short-lived E1 stepping only being used in mobile processors. Stepping L2 and M0 are the "Allendale" chips with just 2 MiB L2 cache, reducing production cost and power consumption for low-end processors.

The G0 and M0 steppings improve idle power consumption in C1E state and add the C2E state in desktop processors. In mobile processors, all of which support C1 through C4 idle states, steppings E1, G0, and M0 add support for the Mobile Intel 965 Express (Santa Rosa) platform with Socket P, while the earlier B2 and L2 steppings only appear for the Socket M based Mobile Intel 945 Express (Napa refresh) platform.

The model 22 stepping A1 (cpuid 10661h) marks a significant design change, with just a single core and 1 MiB L2 cache further reducing the power consumption and manufacturing cost for the low-end. Like the earlier steppings, A1 is not used with the Mobile Intel 965 Express platform.

Steppings G0, M0 and A1 mostly replaced all older steppings in 2008. In 2009, a new stepping G2 was introduced to replace the original stepping B2.[6]

Steppings using 45 nm process

Mobile (Penryn) Desktop (Wolfdale) Desktop (Yorkfield) Server (Wolfdale-DP, Harpertown, Dunnington)
Stepping Released Area CPUID L2 cache Max. clock Celeron Pentium Core 2 Celeron Pentium Core 2 Xeon Core 2 Xeon Xeon
C0 Nov 2007 107 mm² 10676 6 MiB 3.00 GHz E8000 P7000 T8000 T9000 P9000 SP9000 SL9000 X9000 E8000 3100 QX9000 5200 5400
M0 Mar 2008 82 mm² 10676 3 MiB 2.40 GHz 7xx SU3000 P7000 P8000 T8000 SU9000 E5000 E2000 E7000
C1 Mar 2008 107 mm² 10677 6 MiB 3.20 GHz Q9000 QX9000 3300
M1 Mar 2008 82 mm² 10677 3 MiB 2.50 GHz Q8000 Q9000 3300
E0 Aug 2008 107 mm² 1067A 6 MiB 3.33 GHz T9000 P9000 SP9000 SL9000 Q9000 QX9000 E8000 3100 Q9000 Q9000S QX9000 3300 5200 5400
R0 Aug 2008 82 mm² 1067A 3 MiB 2.93 GHz 7xx 900 SU2000 T3000 T4000 SU2000 SU4000 SU3000 T6000 SU7000 P8000 SU9000 E3000 E5000 E6000 E7000 Q8000 Q8000S Q9000 Q9000S 3300
A1 Sep 2008 503 mm² 106D1 3 MiB 2.67 GHz 7400

In the model 23 (cpuid 01067xh), Intel started marketing stepping with full (6 MiB) and reduced (3 MiB) L2 cache at the same time, and giving them identical cpuid values. All steppings have the new SSE4.1 instructions. Stepping C1/M1 was a bug fix version of C0/M0 specifically for quad core processors and only used in those. Stepping E0/R0 adds two new instructions (XSAVE/XRSTOR) and replaces all earlier steppings.

In mobile processors, stepping C0/M0 is only used in the Intel Mobile 965 Express (Santa Rosa refresh) platform, whereas stepping E0/R0 supports the later Intel Mobile 4 Express (Montevina) platform.

Model 30 stepping A1 (cpuid 106d1h) adds an L3 cache as well as six instead of the usual two cores, which leads to an unusually large die size of 503 mm².[7] As of February 2008, it has only found its way into the very high-end Xeon 7400 series (Dunnington).

System requirements

Motherboard compatibility

Conroe, Conroe XE and Allendale all use Socket LGA 775; however, not every motherboard is compatible with these processors.

Supporting chipsets are:

See also: List of Intel chipsets

The currently released Yorkfield XE model QX9770 (45 nm with 1600 MT/s FSB) currently has limited chipset compatibility - with only X38, P35 (With Overclocking) and some high-performance X48 and P45 motherboards being compatible. BIOS updates are gradually being released to provide support for the new Penryn technology, and the new QX9775 is only compatible with the Intel D5400XS motherboard. The Wolfdale-3M model E7200 also has limited compatibility (at least the Xpress 200 chipset is incompatible)[citation needed].

Although a motherboard may have the required chipset to support Conroe, some motherboards based on the above-mentioned chipsets do not support Conroe. This is because all Conroe-based processors require a new power delivery feature set specified in Voltage Regulator-Down (VRD) 11.0. This requirement is a result of Conroe's significantly lower power consumption, compared to the Pentium 4/D CPUs it replaced. A motherboard that has both a supporting chipset and VRD 11 supports Conroe processors, but even then some boards will need an updated BIOS to recognize Conroe's FID (Frequency ID) and VID (Voltage ID).

Synchronous memory modules

Unlike the previous Pentium 4 and Pentium D design, the Core 2 technology sees a greater benefit from memory running synchronously with the Front Side Bus (FSB). This means that for the Conroe CPUs with FSB of 1066 MT/s, the ideal memory performance for DDR2 is PC2-8500. In a few configurations, using PC2-5300 instead of PC2-4200 can actually decrease performance. Only when going to PC2-6400 is there a significant performance increase. While DDR2 memory models with tighter timing specifications do improve performance, the difference in real world games and applications is often negligible.[8]

Optimally, the memory bandwidth afforded should match the bandwidth of the FSB, that is to say that a CPU with a 533 MT/s rated bus speed should be paired with RAM matching the same rated speed, for example DDR2 533, or PC2-4200. A common myth[citation needed] is that installing interleaved RAM will offer double the bandwidth. However, at most the increase in bandwidth by installing interleaved RAM is roughly 5–10%. The AGTL+ PSB[dead link] used by all NetBurst processors as well as current and medium-term (pre-QuickPath) Core 2 processors provide a 64-bit data path. Current chipsets provide for a couple of either DDR2 or DDR3 channels.

Matched processor and RAM ratings
Processor model Front side bus Matched memory and maximum bandwidth
single channel / dual channel
DDR DDR2 DDR3
mobile: T5200, T5300, U2n00, U7n00 533 MT/s PC-3200 (DDR-400)
3.2 GB/s		 PC2-4200 (DDR2-533)
4.264 GB/s
PC2-8500 (DDR2-1066)
8.532 GB/s		 PC3-8500 (DDR3-1066)
8.530 GB/s
desktop: E6n00, E6n20, X6n00, E7n00, Q6n00 and QX6n00
mobile: T9400, T9550, T9600, P7350, P7450, P8400, P8600, P8700, P9500, P9600, SP9300, SP9400, X9100		 1066 MT/s
mobile: T5n00, T5n50, T7n00 (Socket M), L7200, L7400 667 MT/s PC-3200 (DDR-400)
3.2 GB/s		 PC2-5300 (DDR2-667)
5.336 GB/s		 PC3-10600 (DDR3-1333)
10.670 GB/s
desktop: E6n40, E6n50, E8nn0, Q9nn0, QX6n50, QX9650 1333 MT/s
mobile: T5n70, T6400, T7n00 (Socket P), L7300, L7500, X7n00, T8n00, T9300, T9500, X9000
desktop: E4n00, Pentium E2nn0, Pentium E5nn0, Celeron 4n0, E3n00		 800 MT/s PC-3200 (DDR-400)
3.2 GB/s
PC-3200 (DDR-400)
3.2 GB/s		 PC2-6400 (DDR2-800)
6.400 GB/s
PC2-8500 (DDR2-1066)
8.532 GB/s		 PC3-6400 (DDR3-800)
6.400 GB/s
PC3-12800 (DDR3-1600)
12.800 GB/s
desktop: QX9770, QX9775 1600 MT/s

On jobs requiring large amounts of memory access, the quad-core Core 2 processors can benefit significantly[9] from using PC2-8500 memory, which runs at exactly the same speed as the CPU's FSB; this is not an officially supported configuration, but a number of motherboards support it.

The Core 2 processor does not require the use of DDR2. While the Intel 975X and P965 chipsets require this memory, some motherboards and chipsets support both Core 2 processors and DDR memory. When using DDR memory, performance may be reduced because of the lower available memory bandwidth.

Chip errata

The Core 2 memory management unit (MMU) in X6800, E6000 and E4000 processors does not operate to previous specifications implemented in previous generations of x86 hardware. This may cause problems, many of them serious security and stability issues, with existing operating system software. Intel's documentation states that their programming manuals will be updated "in the coming months" with information on recommended methods of managing the translation lookaside buffer (TLB) for Core 2 to avoid issues, and admits that, "in rare instances, improper TLB invalidation may result in unpredictable system behavior, such as hangs or incorrect data."[10]

Among the issues stated:

  • Non-execute bit is shared across the cores.
  • Floating point instruction non-coherencies.
  • Allowed memory corruptions outside of the range of permitted writing for a process by running common instruction sequences.

Intel errata Ax39, Ax43, Ax65, Ax79, Ax90, Ax99 are said to be particularly serious.[11] 39, 43, 79, which can cause unpredictable behavior or system hang, have been fixed in recent steppings.

Among those who have stated the errata to be particularly serious are OpenBSD's Theo de Raadt[12] and DragonFly BSD's Matthew Dillon.[13] Taking a contrasting view was Linus Torvalds, calling the TLB issue "totally insignificant", adding, "The biggest problem is that Intel should just have documented the TLB behavior better."[14]

Microsoft has issued update KB936357 to address the errata by microcode update,[15] with no performance penalty. BIOS updates are also available to fix the issue.

Key Terms

MT/s. Millions of transfers/second, each transfer on the Intel Core architecture is 32-bits.

See also

References

  1. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ marc.info
  13. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Intel_Core_(microarchitecture)&oldid=590906"