Japanese destroyer Makigumo (1942)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Makigumo
Makigumo on 14 March 1942
History
Empire of Japan
Name: Makigumo
Completed: 14 March 1942
Struck: 1 March 1943
Fate: Scuttled, 1 February 1943
General characteristics
Class & type: Yūgumo-class destroyer
Displacement: 2,520 long tons (2,560 t)
Length: 119.15 m (390 ft 11 in)
Beam: 10.8 m (35 ft 5 in)
Draught: 3.75 m (12 ft 4 in)
Speed: 35 knots (40 mph; 65 km/h)
Complement: 228
Armament:

Makigumo (巻雲?) was a Yūgumo-class destroyer of the Imperial Japanese Navy. Her name means "Cirrus Clouds" (Rolling Clouds).

Design and description

The Yūgumo class was a repeat of the preceding Kagerō class with minor improvements that increased their anti-aircraft capabilities. Their crew numbered 228 officers and enlisted men. The ships measured 119.17 meters (391 ft 0 in) overall, with a beam of 10.8 meters (35 ft 5 in) and a draft of 3.76 meters (12 ft 4 in).[1] They displaced 2,110 metric tons (2,080 long tons) at standard load and 2,560 metric tons (2,520 long tons) at deep load.[2] The ships had two Kampon geared steam turbines, each driving one propeller shaft, using steam provided by three Kampon water-tube boilers. The turbines were rated at a total of 52,000 shaft horsepower (39,000 kW) for a designed speed of 35 knots (65 km/h; 40 mph).[3]

The main armament of the Yūgumo class consisted of six Type 3 127-millimeter (5.0 in) guns in three twin-gun turrets, one superfiring pair aft and one turret forward of the superstructure.[2] The guns were able to elevate up to 75° to increase their ability against aircraft, but their slow rate of fire, slow traversing speed, and the lack of any sort of high-angle fire-control system meant that they were virtually useless as anti-aircraft guns.[4] They were built with four Type 96 25-millimeter (1.0 in) anti-aircraft guns in two twin-gun mounts, but more of these guns were added over the course of the war. The ships were also armed with eight 610-millimeter (24.0 in) torpedo tubes in a two quadruple traversing mounts; one reload was carried for each tube. Their anti-submarine weapons comprised two depth charge throwers for which 36 depth charges were carried.[2]

Construction and career

Following the Battle of Midway in June 1942, downed American aircrew SBD Ensign Frank W. O'Flaherty and AMM1c Bruno P. Gaido were pulled from the water by Makigumo. After an interrogation, the crew tied weights around O'Flaherthy's and Gaido's feet and threw them into the Pacific to drown, instead of keeping them prisoner until they reached Japan.[citation needed] Makigumo's crew thought it as payback for the loss of two-thirds of the Kidō Butai Pearl Harbor attack force during the battle with the loss of the aircraft carriers Akagi, Kaga, Sōryū, and Hiryū.[citation needed]

Shortly after the Battle of the Santa Cruz Islands during the early hours of 27 October 1942, Makigumo along with the destroyer Akigumo scuttled the heavily damaged and abandoned aircraft carrier USS Hornet. US destroyers had attempted to scuttle Hornet earlier but failed to do so before Japanese naval forces forced the US ships to withdraw. Despite this, the Japanese failed in their mission to bombard Henderson Field.

On 1 February 1943, Makigumo was on a troop evacuation run to Guadalcanal. While maneuvering to avoid a PT boat attack, she struck a mine. The destroyer Yūgumo removed 237 survivors, including Commander Fujita, and scuttled Makigumo with a torpedo, 3 miles (4.8 km) south-southwest of Savo Island (Lua error in package.lua at line 80: module 'strict' not found.).

Notes

  1. Chesneau, p. 195
  2. 2.0 2.1 2.2 Whitley, p. 203
  3. Jentschura, Jung & Mickel, p. 150
  4. Campbell, p. 192

References

  • Lua error in package.lua at line 80: module 'strict' not found.Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

External links