List of Lycoming O-360 variants
From Infogalactic: the planetary knowledge core
File:LycomingO-360.JPG
Lycoming O-360-A4A installed in a Piper PA-18.
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
This is a list of the variants of the Lycoming O-360 aircraft engine. There are 167 different models within the O-360 family of engines, with 12 different prefixes.
Contents
Variants
O-360
- O-360-A1A
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. The base model. A four-cylinder, horizontally opposed, air-cooled, direct-drive engine which includes provisions for supplying oil through the propeller shaft for installation of a single-acting controllable-pitch propeller. First certified 20 July 1955.[1][2]
- O-360-A1AD
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1A except it is equipped with a Bendix D4LN-2021 dual magneto instead of two single magnetos.[1][2]
- O-360-A1C
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1A except with a rear-mounted Bendix carburetor and 200 series magnetos.[1][2]
- O-360-A1D
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1A except with Bendix 200 series magnetos.[1][2]
- O-360-A1F
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1A except with Bendix 1200 impulse coupling, high altitude magnetos.[1][2]
- O-360-A1F6
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1F except with counter-weighted crankshaft.[1][2]
File:Cessna177BCardinal05.jpg
The Cessna 177B Cardinal uses a Lycoming O-360-A1F6D of 180 hp (130 kW).
- O-360-A1F6D
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1F6 except that it is equipped with one Bendix D4LN-2021 impulse coupling dual magneto instead of incorporating two single magneto.[1][2]
- O-360-A1G
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1F except with a horizontal carburetor.[1][2]
- O-360-A1G6
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1G except has a crankshaft that is equipped with counterweights.[1][2]
File:Beechcraft76DuchessC-GJFE02.jpg
The Beechcraft Duchess uses one 180 hp (130 kW) O-360-A1G6D on the left wing and one LO-360-A1G6D on the right wing.
- O-360-A1G6D
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1G6 except that it is equipped with a Bendix D4LN-2021 magneto in place of two single magnetos.[1][2]
- O-360-A1H
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1G except its crankcase has a propeller governor drive mounted on the left front instead of on the engine accessory housing.[1][2]
- O-360-A1H6
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1H except that it has a crankshaft equipped with 6.3 and 8th order pendulum counterweights and it uses Slick magnetos.[1][2]
- O-360-A1LD
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1A except that it is equipped with one Bendix D4LN-2021 impulse coupling dual magneto instead of two single magnetos.[1][2]
- O-360-A1P
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the C1G except that it has dynafocal engine mounts.[1][2]
- O-360-A2A
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1A except that it has no provisions for a controllable-pitch propeller.[1][2]
- O-360-A2D
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1D except that it has no provisions for a controllable-pitch propeller.[1][2]
- O-360-A2E
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A2D but it is equipped with an AN-type fuel pump drive.[1][2]
- O-360-A2F
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1F except has that it has no provisions for a controllable-pitch propeller.[1][2]
- O-360-A2G
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1G but it has no provision for a controllable-pitch propeller.[1][2]
- O-360-A2H
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1H except does not have propeller governor drive installed.[1][2]
- O-360-A3A
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A2A except that it has six special length bushings in propeller flange.[1][2]
- O-360-A3AD
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A3A except that it is equipped with a Bendix D4LN-2021 dual magneto instead of Bendix S4LN-21 and S4LN-20 magnetos.[1][2]
- O-360-A3D
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A2D except that it has special long propeller attaching bushings for use with Sensenich fixed-pitch propellers.[1][2]
- O-360-A4A
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A3A except has stiffer crankshaft.[1][2]
- O-360-A4AD
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A4A except is equipped with a Bendix D4LN-2021 impulse coupling dual magneto instead of two single magnetos.[1][2]
- O-360-A4D
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A4A except that it has a Bendix S4LN-200 retard breaker and S4LN-204 magnetos.[1][2]
- O-360-A4G
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A2G except that it has a stiffer crankshaft and solid main bearing journals.[1][2]
- O-360-A4J
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A4G except that it has different magnetos.[1][2]
- O-360-A4K
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A4J except that it has Slick 4051 and 4050 magnetos instead of Bendix S4LN-21 and S4LN-204 magnetos.[1][2]
- O-360-A4M
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A4A but with Slick 4051 and 4050 magnetos instead of Bendix S4LN-21 and S4LN-204 magnetos.[1][2]
- O-360-A4N
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A4M except that it has a non-machined propeller governor pad on left front of crankcase.[1][2]
- O-360-A4P
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A4M except that it has short propeller flange bushings.[1][2]
- O-360-A5AD
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A4AD except that it has six standard length propeller flange bushings instead of six special length bushings.[1][2]
- O-360-B1A
- 168 hp (125 kW) at 2700 rpm, Minimum fuel grade 80/87 avgas, compression ratio 7.20:1. Same as the A1A except that it has a lower compression ratio and power rating.[1]
- O-360-B1B
- 168 hp (125 kW) at 2700 rpm, Minimum fuel grade 80/87 avgas, compression ratio 7.20:1. Same as the B1A except has Bendix 200 series magnetos.[1]
- O-360-B2A
- 168 hp (125 kW) at 2700 rpm, Minimum fuel grade 80/87 avgas, compression ratio 7.20:1. Same as the B1A except has no provisions for controllable-pitch propeller.[1]
- O-360-B2B
- 168 hp (125 kW) at 2700 rpm, Minimum fuel grade 80/87 avgas, compression ratio 7.20:1. Same as the B1B except that it has no provisions for controllable-pitch propeller.[1]
- O-360-B2C
- 168 hp (125 kW) at 2700 rpm, Minimum fuel grade 80/87 avgas, compression ratio 7.20:1. Same as the B2A except that it has heavier IO-360-A crankshaft and rods.[1]
- O-360-C1A
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1A except that it has its crankcase machined for conical rubber mount bushings in place of dynafocal mountings.[1][2]
- O-360-C1C
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the C1A except with Bendix 200 series magnetos.[1][2]
- O-360-C1E
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the C1A except that it is equipped with Slick 4051 and 4050 magnetos instead of Bendix S4LN-21 and S4LN-204 magnetos.[1][2]
- O-360-C1F
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1G except that it has Slick 4050 and 4051 magnetos and a rear-type engine mounting instead of dynafocal type mount.[1][2]
- O-360-C1G
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the C1A except that the propeller governor drive is located on the left-front of the crankcase, the same as on the O-360-A1H.[1][2]
- O-360-C2A
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the C1A except that it has no provision for controllable-pitch propeller.[1][2]
- O-360-C2B
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the C2A except that it has a rear-mounted Bendix carburetor.[1][2]
- O-360-C2C
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the C2A except that it has Bendix 200 series magnetos.[1][2]
- O-360-C2D
- 180 hp (134 kW) at 2900 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the C2B except has Bendix 200 series magnetos. First certified.[1][2]
- O-360-C2E
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the C2A except that it is equipped with Slick 4051 and 4050 magnetos instead of Bendix S4LN-21 and S4LN-20 magnetos.[1][2]
- O-360-C4F
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the C1F except has a solid crankshaft and no provision for a prop governor.[1][2]
- O-360-C4P
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A4M except has short propeller flange bushings and conical engine mounts.[1][2]
- O-360-D1A
- 168 hp (125 kW) at 2700 rpm, Minimum fuel grade 80/87 avgas, compression ratio 7.20:1. Same as the B1A except that it has a crankcase machined for conical rubber mount bushings in place of dynafocal mountings.[1]
- O-360-D2A
- 168 hp (125 kW) at 2700 rpm, Minimum fuel grade 80/87 avgas, compression ratio 7.20:1. Same as the B2A except that it has a crankcase machined for conical rubber mount bushings in place of dynafocal mountings.[1]
- O-360-D2B
- 168 hp (125 kW) at 2700 rpm, Minimum fuel grade 80/87 avgas, compression ratio 7.20:1. Same as the D2A except has Bendix 200 series magnetos.[1]
- O-360-E1AD
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 9.00:1. Similar to the A1A except that it has a crankcase with an integral accessory section, front-mounted fuel pump, external mounted oil pump, automatic valve tappets and rocker arms and also a dual magneto.[1]
- O-360-E1A6D
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 9.00:1. same as the E1AD except that it is equipped with one 6.3 order and one 8th order counterweight.[1]
- O-360-E2AD
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 9.00:1. Similar to the E1AD except without provision for controllable-pitch propeller.[1]
- O-360-E1BD
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 9.00:1. Similar to the E1AD except with Bendix D4RN-2200 retard breaker magnetos in place of the Bendix D4RN-2021 impulse coupling magneto.[1]
- O-360-E2BD
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 9.00:1. Similar to the E1BD except without provision for controllable-pitch propeller.[1]
- O-360-F1A6
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1G6 except that it has two Slick 4191 magnetos, a propeller governor drive on the crankcase left front and oil sump designed for retracted nose wheel clearance.[1][2]
- O-360-G1A6
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the F1A6 except that it has a machined pad on the right front of the crankcase for installation equipment.[1][2]
![](/w/images/thumb/1/1b/Robinson.r22.g-cbxn.arp.jpg/300px-Robinson.r22.g-cbxn.arp.jpg)
Robinson R22 Beta II with Lycoming O-360-J2A engine.
- O-360-J2A
- 145 hp (108 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the C1C except has O-320-B2C prop flange bushings, lightweight cylinders and lower power rating for helicopter use.[1][2] This engine is used in the Robinson R22 helicopter.
HO-360
- HO-360-A1A
- 180 hp (134 kW) at 2900 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1D but with dynafocal mounts and a different series Marvel carburetor.[1][2]
- HO-360-B1A
- 180 hp (134 kW) at 2900 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as C2D but with a different cam shaft.[1][2]
- HO-360-B1B
- 180 hp (134 kW) at 2900 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the B1A but with Bendix 200 series retard breaker magnetos.[1][2]
- HO-360-C1A
- 180 hp (134 kW) at 2900 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the C2D except that it uses an HA-6 carburetor in place of the PSH-5HD carburetor.[1][2]
LO-360
File:PiperPA-44-180SeminoleC-FLZJ02.jpg
The Piper PA-44 Seminole is fitted with one LO-360-E1A6D or one LO-360-A1H6 on the right wing along with one O-360-E1A6D or O-360-A1H6 on the left wing to eliminate the critical engine on this twin.
- LO-360-A1G6D
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1G6D except that it has counter-clockwise (reverse) rotation.[1][2]
- LO-360-A1H6
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1H except that it has counter-clockwise (reverse) rotation.[1][2]
- LO-360-E1AD
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 9.00:1. Similar to the E1AD except has counter-clockwise (reverse) rotation.[1]
- LO-360-E1A6D
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 9.00:1. Similar to the E1A6D except has counter-clockwise (reverse) rotation.[1]
- LO-360-E2AD
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 9.00:1. Similar to the E2AD except has counter-clockwise (reverse) rotation.[1]
- LO-360-E1BD
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 9.00:1. Similar to the E1BD except has counter-clockwise (reverse) rotation.[1]
- LO-360-E2BD
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 9.00:1. Similar to the E2AD except has counter-clockwise (reverse) rotation.[1]
TO-360
- TO-360-A1A6D
- 200 hp (149 kW) at 2575 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.00:1. Turbosupercharger: Rajay 301E10-2. Base model, a four-cylinder air-cooled, horizontally opposed, direct drive, carbureted, turbocharged engine with oil jets internal piston cooling.[3]
- TO-360-C1A6D
- 210 hp (157 kW) at 2575 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 7.30:1. Turbosupercharger: Rajay 301E10-2. Same as the TO-360-A1A6D but with the power output increased, lower compression ratio and carburetor located after the turbocharger instead of before the turbocharger.[3]
- TO-360-E1A6D
- 180 hp (134 kW) at 2575 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.00:1. Turbosupercharger: AiResearch TA04. Same as the 0-360-E1A6D but with an AiResearch TA402 turbocharger, 8.0:1 compression ratio pistons, piston cooling oil jets and a high pressure fuel pump.[3]
- TO-360-F1A6D
- 210 hp (157 kW) at 2575 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 7.30:1. Turbosupercharger: Rajay 301E10-2. Same as the TO-360-C1A6D but with rear type mounting (long type 1.12 inch conical mount).[3]
LTO-360
- LTO-360-A1A6D
- 200 hp (149 kW) at 2575 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.00:1. Turbosupercharger: Rajay 301E10-2. Same as the TO-360-A1A6D But with counter-clockwise (reverse) rotation.[3]
- LTO-360-E1A6D
- 180 hp (134 kW) at 2575 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.00:1. Turbosupercharger: AiResearch TA04. Same as the TO-360-E1A6D But with counter-clockwise (reverse) rotation.[3]
IO-360
File:VansRV-8N4280Kphoto1.jpg
The Van's Aircraft RV-8 homebuilt aircraft is often fitted with a 200 hp IO-360 engine.
![](/w/images/thumb/b/b9/Thorp_T18_VH-OTM.jpg/300px-Thorp_T18_VH-OTM.jpg)
The largest engine that is normally fitted to the Thorp T-18 homebuilt aircraft is the 200 hp IO-360 engine.
- IO-360-A1A
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. The base fuel-injected model, a four-cylinder air-cooled, horizontally opposed, direct-drive, fuel-injected, tuned induction engine with oil jet internal piston cooling. It includes provision for single-action controllable-pitch propeller.[4]
- IO-360-A1B
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1A but with impulse coupling magnetos.[4]
- IO-360-A1B6
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1B but with a crankshaft that has one 6.3 order and one 8th order counterweights.[4]
- IO-360-A1B6D
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1B6 but with Bendix Series impulse coupling dual magnetos instead of two S-1200 Series magnetos.[4]
- IO-360-A1C
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1A but with Bendix S-1200 series high altitude magnetos.[4]
- IO-360-A1D
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1B but with one S-20 series impulse coupling and one S-200 series magnetos in place of the two S-1200 series magnetos.[4]
- IO-360-A1D6
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1B but with a propeller governor drive located on left front of crankcase in place of on the accessory housing. Incorporates crankshaft equipped with one 6.3 order and one 8th order counterweights.[4]
- IO-360-A1D6D
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1D6 but with a Bendix D4LN-3021 dual magneto.[4]
- IO-360-A2A
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1A but with a modified crankshaft to accept a fixed-pitch propeller.[4]
- IO-360-A2B
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A2A but with impulse coupling magnetos.[4]
- IO-360-A2C
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A2A but with Bendix S-1200 series high altitude magnetos.[4]
- IO-360-A3B6
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1B6D but with the propeller locating bushings rotated 120° clockwise.[4]
- IO-360-A3B6D
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1B6D but with the propeller locating bushings rotated 120° clockwise.[4]
- IO-360-A3D6D
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1D6D but with the propeller locating bushings rotated 120° clockwise.[4]
- IO-360-B1A
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the A1A but with a Simmonds Type 530 fuel injector and without a tuned induction system.[2][4]
- IO-360-B1B
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the B1A but with a Bendix RSA-5AD1 injector. Fuel pressure limit at inlet to diaphragm pump.[2][4]
- IO-360-B1C
- 177 hp (132 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the HIO-360-B1B externally but with a crankcase machined for No. 1 Dynafocal mounts.[2][4]
- IO-360-B1D
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the B1B but with an AN fuel pump drive. Fuel pressure to diaphragm pump does not apply.[2][4]
- IO-360-B1E
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the B1B except the oil sumps, induction manifolding and alternate magnetos.[2][4]
- IO-360-B1F
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the B1B but with Bendix S 1200 series high altitude magnetos.[2][4]
- IO-360-B1F6
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the B1F but with a crankshaft that has one 6.3 and one 8th order counterweights.[2][4]
- IO-360-B1G6
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the B1E but with a front-mounted governor, provision for bed mounting and a counterweighted crankshaft.[2][4]
- IO-360-B2E
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the B1F but without provisions for a controllable-pitch propeller.[2][4]
- IO-360-B2F
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the B1F but with different front crankshaft oil plug, for fixed-pitch propeller.[2][4]
- IO-360-B2F6
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the B2F but with a crankshaft with one 6.3 and one 8th order counterweights.[2][4]
- IO-360-B4A
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the B1B but has different magnetos and a stiffer crankshaft and solid main bearing journals.[2][4]
- IO-360-C1A
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1A but with a rear-mounted injector.[4]
- IO-360-C1B
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the C1A but with Bendix 1200 series magnetos.[4]
- IO-360-C1C
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the C1B but with a 14-degree fuel injector inlet adapter and an impulse coupling Bendix S4LN-1227 magneto.[4]
- IO-360-C1C6
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the C1C but with a crankshaft with one 6.3 order and one 8th order counterweights.[4]
- IO-360-C1D6
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the C1B but with an impulse coupled magneto and a crankshaft equipped with one 6.3 order and one 8th order counterweights.[4]
- IO-360-C1E6
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the C1C but with different magnetos. This model also has a propeller governor drive on the left front of its crankcase and has a crankshaft equipped with one 6.3 order and one 8th order counterweight.[4]
- IO-360-C1E6D
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the C1E6 but with a Bendix D4LN-2021 impulse coupling dual magneto.[4]
- IO-360-C1F
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the C1C but with an AN fuel pump and fuel pump drive.[4]
- IO-360-C1G6
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the C1D but with two retard magnetos instead of impulse magnetos, a non-machined front governor pad and provision for front bed mounting.[4]
- IO-360-D1A
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the C1B but with Dynafocal mounts.[4]
- IO-360-E1A
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the B1E but with a retard magneto in place of an impulse coupling type and has Type 2, eighteen degree Dynafocal mounting brackets instead of Type 1, thirty degree brackets.[2][4]
- IO-360-F1A
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.50:1. Same as the B2F but with a crankshaft with one 6.3 and one 8th order counterweights.[4]
- IO-360-J1AD
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1B but with Bendix D4LN-2021 dual magneto and provisions for a rear type engine mounting.[4]
- IO-360-J1A6D
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the J1AD except crankshaft incorporates one 6.3 order and one 8th order counterweights.[4]
- IO-360-K2A
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A2A except equipped with Bendix S4LN-21-20 magnetos and has provisions for straight conical mounts.[4]
- IO-360-L2A
- 160 hp (119 kW) at 2400 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the B2F but with a lower power rating.[2][4] Used in the Cessna 172R.
- IO-360-M1A
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the B1E but with a front inlet fuel injector, propeller governor on front of the crankcase and a retard magneto.[2][4]
- IO-360-M1B
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the M1A but with a rear-mounted propeller governor and impulse magneto.[2][4]
LIO-360
- LIO-360-C1E6
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the IO-360-C1E6 except that it has counter-clockwise (reverse) rotation for use on twin-engined aircraft.[4]
AIO-360
- AIO-360-A1A
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the IO-360-A1A but set up for operation in an inverted position. Differences include a front-mounted propeller governor, two dry oil sumps, dual external oil scavenge pumps, an oil tank, three options of position for fuel injector mounting and provisions for a constant speed propeller.[4]
- AIO-360-A1B
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1A except it uses an impulse coupling magneto.[4]
- AIO-360-A2A
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1A but uses a fixed-pitch propeller.[4]
- AIO-360-A2B
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1A but has one impulse coupling magneto and provision for a fixed-pitch propeller.[4]
- AIO-360-B1B
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the A1B except with a front-mounted fuel injector.[4]
AEIO-360
- AEIO-360-A1A
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the IO-360-A1A but it is equipped with an inverted oil system kit for aerobatic flight.[4]
- AEIO-360-A1B
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the IO-360-A1B but it is equipped with an inverted oil system kit for aerobatic flight.[4]
- AEIO-360-A1B6
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the IO-360-A1B6 but it is equipped with an inverted oil system kit for aerobatic flight.[4]
- AEIO-360-A1C
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the IO-360-A1C but it is equipped with an inverted oil system kit for aerobatic flight.[4]
- AEIO-360-A1D
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the IO-360-A1D but it is equipped with an inverted oil system kit for aerobatic flight.[4]
File:Pitts Special S-1T C-GZRO 02.JPG
The Aerotek-built Pitts Special S-1T is equipped with a Lycoming AEIO-360-A1E.
- AEIO-360-A1E
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the AEIO-360-A1A but with the propeller governor drive on left front of crankcase and Bendix S4LN-21/-20 magnetos.[4]
- AEIO-360-A1E6
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as AEIO-360-A1E but the crankshaft has one 6.3 order and one 8th order counterweights[4]
- AEIO-360-A2A
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the IO-360-A2A but with an inverted oil system kit for aerobatic flight.[4]
- AEIO-360-A2B
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the IO-360-A2B but with an inverted oil system kit for aerobatic flight.[4]
- AEIO-360-A2C
- 200 hp (149 kW) at 2700 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the IO-360-A2C but with an inverted oil system kit for aerobatic flight.[4]
- AEIO-360-B1B
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the IO-360-B1B but with an inverted oil system kit for aerobatic flight.[2][4]
- AEIO-360-B1D
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the IO-360-B1D but with an inverted oil system kit for aerobatic flight.[2][4]
- AEIO-360-B1F
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the IO-360-B1F but with an inverted oil system kit for aerobatic flight.[2][4]
- AEIO-360-B1F6
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the IO-360-B1F6 but with an inverted oil system kit for aerobatic flight.[2][4]
- AEIO-360-B1G6
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the AEIO-360-B1F6 except equipped with Slick 4051 and 4050 magnetos.[2][4]
- AEIO-360-B2F
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the IO-360-B2F but with an inverted oil system kit for aerobatic flight.[2][4]
- AEIO-360-B2F6
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the IO-360-B2F6 but with an inverted oil system kit for aerobatic flight.[2][4]
- AEIO-360-B1H
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as AEIO-360-H1B except has Dynafocal mounting.[2][4]
- AEIO-360-B4A
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the IO-360-B4B but with an inverted oil system kit for aerobatic flight.[2][4]
- AEIO-360-H1A
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the AEIO-360-B1G6 but without counterweights and has provision for commercial (straight) engine mount.[2][4]
- AEIO-360-H1B
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the AEIO-360-H1A but with the propeller governor drive on left front of crankcase.[2][4]
HIO-360
![](/w/images/thumb/2/28/EnstromF28FC-GHRS.jpg/300px-EnstromF28FC-GHRS.jpg)
The Enstrom F-28F is equipped with a Lycoming HIO-360-F1AD engine.
- HIO-360-A1A
- 180 hp (134 kW) at 2900 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the IO-360-A1A except that it has a Bendix RSA-5AB1 fuel injector, Bendix S4LN-200 magnetos and lacks provision for propeller governor drive.[4]
- HIO-360-A1B
- 180 hp (134 kW) at 2900 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the HIO-360-A1A but with conical mounts, no AMC unit on the fuel injector and a 90° fuel injector mount.[4]
- HIO-360-B1A
- 180 hp (134 kW) at 2900 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the HIO-360-A1A except for the compression ratio and does not have tuned induction.[2][4]
- HIO-360-B1B
- 180 hp (134 kW) at 2900 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.50:1. Same as the HIO-360-B1A except has an AN fuel pump drive.[2][4]
- HIO-360-C1A
- 205 hp (153 kW) at 2900 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the IO-360-A1A except it has a rear-mounted fuel injector.[4]
- HIO-360-C1B
- 205 hp (153 kW) at 2900 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the HIO-360-C1A except it incorporates Bendix S-1200 series magnetos.[4]
- HIO-360-D1A
- 190 hp (142 kW) at 3200 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 10:1. Same as the HIO-360-C1A except incorporates narrow crankpin crankshaft and different fuel injector.[4]
- HIO-360-E1AD
- 190 hp (142 kW) at 2900 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.00:1. Same as the HIO-360-C1A except with a lower compression ratio piston, equipped with dual magneto and incorporates features suitable for turbocharging. When equipped with the Enstrom Helicopter Corporation turbocharger Kit Number SK-28-121000 or equivalent, these engines are capable of delivering 205 hp (153 kW) at 3000 rpm and a manifold pressure of 36.5 inches Hg absolute.[4]
- HIO-360-E1BD
- 190 hp (142 kW) at 2900 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.00:1. Same as the HIO-360-E1AD but with a Bendix D4LN-2200 (retard breaker) dual magneto. Eligible for turbosupercharging. When equipped with the Enstrom Helicopter Corporation turbocharger Kit Number SK-28-121000 or equivalent, these engines are capable of delivering 205 hp (153 kW) at 3000 rpm and a manifold pressure of 36.5 inches Hg absolute.[4]
- HIO-360-F1AD
- 190 hp (142 kW) at 3050 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.00:1. Same as the HIO-360-E1AD but with a large crankshaft, high crush thin wall bearings and a large base circle camshaft. Eligible for turbosupercharging. When equipped with modified Enstrom turbocharger Kit No. SK-28-121000, this engine is capable of delivering 225 hp (168 kW) at 3050 rpm at a manifold pressure of 39 inches Hg to a critical altitude of 12,000 ft (3,658 m).[4]
- HIO-360-G1A
- 180 hp (134 kW) at 2700 rpm, Minimum fuel grade 91/96 avgas, compression ratio 8.00:1. Same as the HO-360-C1A but with PAC RSA-5AD1 fuel injection system[2][4]
LHIO-360
File:Silvercraft SH-4 at Paris Air Salon 1967.jpg
The Silvercraft SH-4 was equipped with an LHIO-360-C1A engine[5]
- LHIO-360-C1A
- 205 hp (153 kW) at 2900 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the HIO-360-C1A but with counter-clockwise (reverse) rotation.[4]
- LHIO-360-C1B
- 205 hp (153 kW) at 2900 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.70:1. Same as the HIO-360-C1B except with counter-clockwise (reverse) rotation.[4]
- LHIO-360-F1AD
- 190 hp (142 kW) at 3050 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.00:1. Same as the HIO-360-F1AD but with counter-clockwise (reverse) rotation. Eligible for turbosupercharging. When equipped with modified Enstrom turbocharger Kit No. SK-28-121000, this engine is capable of delivering 225 hp (168 kW) at 3050 rpm at a manifold pressure of 39 inches Hg to a critical altitude of 12,000 ft (3,658 m).[4]
TIO-360
- TIO-360-A1A
- 200 hp (149 kW) at 2575 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 7.30:1. Turbosupercharger: Bendix RSA-5AD1. Base TIO-360 model: a four-cylinder air-cooled, horizontally opposed direct drive, fuel-injected, tuned induction, turbocharged engine with internal piston cooling oil jets.[6]
- TIO-360-A1B
- 200 hp (149 kW) at 2575 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 7.30:1. Turbosupercharger: AiResearch T04. Same as the A1A except that it has a straight tubular casting in the induction system and no pressure differential door on 14° down fuel injector adapter.[6]
- TIO-360-A3B6
- 200 hp (149 kW) at 2575 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 7.30:1. Turbosupercharger: AiResearch T04. Same as the A1B but with one 6.3 order and one 8th order counterweights and a pressurized ignition system for high altitude operation.[6]
- TIO-360-C1A6D
- 210 hp (157 kW) at 2575 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 7.30:1. Turbosupercharger: Rotomaster 3BT1EE10J2. Same as the T0-360-C1A6D except for a Bendix RSA-5AD1 fuel injector instead of Marvel-Schebler HA-6 carburetor.[6]
See also
References
- ↑ 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.21 1.22 1.23 1.24 1.25 1.26 1.27 1.28 1.29 1.30 1.31 1.32 1.33 1.34 1.35 1.36 1.37 1.38 1.39 1.40 1.41 1.42 1.43 1.44 1.45 1.46 1.47 1.48 1.49 1.50 1.51 1.52 1.53 1.54 1.55 1.56 1.57 1.58 1.59 1.60 1.61 1.62 1.63 1.64 1.65 1.66 1.67 1.68 1.69 1.70 1.71 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 2.00 2.01 2.02 2.03 2.04 2.05 2.06 2.07 2.08 2.09 2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 2.19 2.20 2.21 2.22 2.23 2.24 2.25 2.26 2.27 2.28 2.29 2.30 2.31 2.32 2.33 2.34 2.35 2.36 2.37 2.38 2.39 2.40 2.41 2.42 2.43 2.44 2.45 2.46 2.47 2.48 2.49 2.50 2.51 2.52 2.53 2.54 2.55 2.56 2.57 2.58 2.59 2.60 2.61 2.62 2.63 2.64 2.65 2.66 2.67 2.68 2.69 2.70 2.71 2.72 2.73 2.74 2.75 2.76 2.77 2.78 2.79 2.80 2.81 2.82 2.83 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 3.0 3.1 3.2 3.3 3.4 3.5 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 4.00 4.01 4.02 4.03 4.04 4.05 4.06 4.07 4.08 4.09 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 4.19 4.20 4.21 4.22 4.23 4.24 4.25 4.26 4.27 4.28 4.29 4.30 4.31 4.32 4.33 4.34 4.35 4.36 4.37 4.38 4.39 4.40 4.41 4.42 4.43 4.44 4.45 4.46 4.47 4.48 4.49 4.50 4.51 4.52 4.53 4.54 4.55 4.56 4.57 4.58 4.59 4.60 4.61 4.62 4.63 4.64 4.65 4.66 4.67 4.68 4.69 4.70 4.71 4.72 4.73 4.74 4.75 4.76 4.77 4.78 4.79 4.80 4.81 4.82 4.83 4.84 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 6.0 6.1 6.2 6.3 Lua error in package.lua at line 80: module 'strict' not found.